counter for wordpress

BRM12Pro2 High-End Pro Midrange 12″ inches Speaker Peak 4800W, 1200RMS, 8 Ohms

By |July 23rd, 2026|

BRM12Pro2 High-End Pro Midrange 12" inches Speaker Peak 4800W, 1200RMS, 8 Ohms Condition: New Handling Time: 3 Business Days SKU: BRM12Pro2v2 UPC: 665659351936 Categories: Car Speakers & Speaker Systems / Car Speakers Bass Rockers BRM12Pro2 High-End Pro Midrange 12" inches Speaker Peak 4800W, 1200RMS, 8 Ohms Bass Rockers BRM12Pro2v2 - Description:   Specifications Nominal Diameter: 314mm. 12in Nominal Impedance: 8 ohm Power Rating: 1200W RMS Sensitivity (1w/1m): 95dB +/- 3dB Frequency range: 49 - 3.5KHz Voice Coil Diameter: 99.3mm Voice Coil Length: 17mm Air gap Height: 8mm Magnet Dimension:220mm x 25mm Thiele & Small Parameters Resonant Frequency, FS: 49Hz D.C. Voice Coil Resistance, Re: 6.2 ohm Mechanical Quality factor, Qms: 21.85 Electrical Quality Factor, Qes: 0.33 Total Quality Factor, Qts: 0.33 Equivalent air Volume to Cms, Vas: 51.76L Mechanical Compliance, Cms: 131uM/N Mechanical Resistance, Rms: 1.10kg/s BL Factor, BI:21.11N/A Effective Surface Area, Sd: 53.1m M Linear Excursion, Xmax:3.5mm Materials Basket: Die Cast Aluminium Cone and Dust Cap: Paper Surround: Treated Cloth Voice Coil Wire: CCAW Voice Coil Bobbin: B Kapton Magnet: Ferrite Mounting Information: Overall Diameter: 313mm Bolt Circle Diameter: 295mm Baffle Cutout Diameter: 285mm Depth:140mm Net Weight:10.5Kg Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.  2. Please allow 1-3cm measuring deviation due to manual measurement.   Our Policies Vortex Audio Return Policy: Vortex Audio return period is 30 days. All returns send to RJ Corporation require a Return Merchandise Authorization (RMA) number, issued by an authorized Vortex Audio representative. Please contact us with the return reason, to request your RMA #. Product returned without this authorization will be refused. An RMA is only effective for ten (10) days from issuance. The RMA number must be printed clearly on the outside of an outer carton (NOT the original merchandise box). All products must be securely protected in double packaging and padding. If the RMA number is not visible, the return may be denied. If a shipping label is placed on or RMA number is written on the manufacturer's box, the product will not be in resalable condition, and in turn will not be eligible for return. All original packaging and materials, including all parts, accessories and instruction manuals from the manufacturer must be returned with the product for inspection. Defective products can be returned to us within 30 days of sale. After 30 days, defective merchandise must use the manufacturing warranty (if applicable). The customer is responsible for return freight costs, as we will cover for replacement item freight costs. Misuses such as blown sub-woofers/speakers are not covered under our return program. Non-Defective Returns will incur a 20% restocking fee and must be in unopened or in resealable, like-new, condition, with all the accessories, parts, manuals, tags, and all the packaging materials intact. Used items and/or items that are not in resealable, like-new, condition as outlined above may incur additional surcharges, up-to return denial, at our discretion. Failure to comply may result in charge-backs, penalties and/or other fees to the customer, up to and including denial of refund. In order to avoid unexpected charges and return denial, please make sure to accurately describe the condition of the returned item, along with the reason for the return, and upon receiving the RMA # make sure to closely follow the packaging and return instructions. Handling fees and freight charges, when applicable, are non-refundable. Vortex Audio Shipping Policy: Delivery times, when specified, exclude weekends, holidays and handling. Delivery dates are estimated on previous shipments, and may slightly vary (unfortunately we cannot guarantee delivery times). Most of our items are shipped via FedEx, UPS or USPS (we may, at our own discretion, switch shipping methods and shipping carriers with similar or better delivery time). We only ship to the address provided at the time of checkout, the address cannot be changed after placing an order (please verify the shipping address before confirming your payment). Some of our items cannot ship to APO/FPO/PO Boxes and/or Internationally. Please contact us before making a purchase to confirm if the specific item can be shipped to your destination. International Buyers Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to placing an order. Vortex Audio International Shipping Policy: For International customers, we accept PayPal as the only payment method. International order are available via the eBay Global Shipping Program. Any brokerage, customs, and duty fees associated with international shipments are customer's responsibility. For International Orders, a phone number is required for the customs documents. Failure to provide one will result in delays. Vortex Audio Payment Policy: Online payments are securely processed via PayPal*, with Purchase Protection. The following payment methods are available: Credit or Debit Cards: Visa Master Card Discover American Express Bank Payments (eCheck) PayPal Credit If you have any questions regarding specific payment options please do not hesitate to contact us. * You can pay via PayPal even if you do not have a PayPal account. You do not have to register for PayPal in order to pay via PayPal (you can checkout with your Credit or Debit card as a guest).

Rockford Fosgate M2-65B 6-1/2″ 2-Way Marine Coaxial Speakers w/ RGB LED – Black

By |July 22nd, 2026|

Featured Brands Home About Us Shipping Returns Contact Us Powered by Frooition Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

4 Pcs Audio360 ADS1040 10″ Shallow Mount Subwoofers + AD6525M Speakers Bundle

By |July 22nd, 2026|

Audio 360 AD6525M 6.5" Midrange Speaker. Each midrange speaker in this bundle is crafted for powerful vocal clarity and dynamic midrange response. With650 Watts Max Power and325 Watts RMS, the AD6525M is perfect for producing loud, clean sound in a variety of audio systems.

2x PRV 10″ Motorcycle Low Frequency Woofer 2400W 4 Ohm MT10W1200 Water Resistant

By |July 22nd, 2026|

INCLUDES: 2x MT10W1200-NDY-4 10" Water Resistant Motorcycle Woofer - 2400 Watts Package - 1200 Watts each Woofer FEATURES: Moto Series MT10W1200-NDY-4 has been engineered to give your custom motorcycle saddlebags the ultimate low frequency midbass response, considering the tough environment on the roads.PRV Audio is proud to present our new MOTO Series (MT), high performance PRO audio line dedicated for motorsports installations, focused on bringing to you the latest innovative materials and components to resist weather conditions and to provide the highest sound reproduction possible.HighlightsOptimized for use in compact enclosures this mid is ideal for motorcycle saddlebags1,200 watts RMS power makes high acoustical outputRubber Surround allows a generous 1.65″ peak-to-peak excursionPowerful neodymium magnet structure features distortion-canceling fixturesFast transient response, deep low tones and dynamic mid bassWeather-resistant paper cone and dust cap with true PRO audio midbass performanceThe MT10W1200-NDY-4 sets a new performance standards that combines durability, efficiency, and maximum displacement into a great looking midbass speaker that will deliver the deepest low frequency response with power and authority.Custom tooled surround allows long throw while maximizing cone surface area, to get superior fidelity and high efficiency!The special composite cone is built with non-pressed paper for reduced break-up and treated to be water resistant, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker, with a generous 1.65″ peak-to-peak excursion before damage.Extensive motor venting cools the voice coil enabling high power handling with low power compression. The large 3″ voice coil allows for 1200 Watts of Amplifier RMS Power, and warrants the outstanding cooling system implemented into the motor.Its powerful optimized neodymium motor is vented to provide excellent cooling for its voice coil. This neo magnet also helps decreasing the weight on the speaker comparing to a ferrite magnet motor. This compact design will fit and sound great on any saddlebag that has about 1 cubic feet. Able to stand up to the use and abuse on bike sound competitions its 3″ voice coil that is wound inside-outside on a fiberglass former features a generous 18 mm winding length for extended Xmax and less distortion.High sensitivity rating of 97 dB 1W/1M which makes it capable of generating a lot of output! GENERAL SPECIFICATIONSNominal Diameter10″ (254 mm)Nominal impedance*4 OhmNominal Power Handling**600 WattsContinuous Program Power (RMS)1200 WattsMax Peak Power***2400 WattsSensitivity 2.00V at 1m97.0 dBRecommended Hi Pass Crossover* *For Full Power Handling65 Hz* *12db Per Octave CrossoverFrequency Response40 – 4,000 HzVoice Coil Diameter3″ (76 mm)Voice Coil WireCCAWVoice Coil Winding Depth18.0 mmFormer MaterialGlass FiberMagnetic Gap Depth10.0 mmFrame MaterialDie Cast AluminumTHIELE-SMALL PARAMETERSEquivalent VolumeVas41.24 lExcursion (mathematical)***Xmax6.5 mmFree Air ResonanceFs46.9 HzMechanical FactorQms7.94Electrical FactorQes0.31Total FactorQts0.30Cone AreaSd373 cm²Mechanical MassMms54.1 gBl FactorBl12.29 TmDc ResistanceRe3.0 OhmInductanceLe0.376 mH at 1 kHzMechanical Mass Without AirMmd50.0 gMechanical ComplianceCms0.212 mm/N EXTRA INFOOverall Diameter10.27” (261 mm)Front Mount Baffle Cutout9.05” (230 mm)Mounting Depth4.49” (114 mm)Overall Depth5.00” (127 mm)Net Weight8.38 Lbs (3.8 kg)Shipping Weight9.95 Lbs (4.5 kg)Carton Dimensions W x L x H11.25”x 11.5” x 6” (286 x 292 x 152 mm)

NEW SKAR AUDIO RP-1200.1D 1600 WATT MAX POWER CLASS D MONOBLOCK SUB AMPLIFIER

By |July 22nd, 2026|

Skar Audio engineered the RP-1200.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its' class. Skar Audio RP-1200.1D Monoblock Amplifier.

Audiopipe APHF-12000D-H1 1-CH Monoblock 1200W Max Class-D Full-Range Amplifier

By |July 22nd, 2026|

The Audiopipe APHF-12000D-H1 is a high-quality 1-channel monoblock amplifier with a power output of 1200W RMS. Designed for car audio systems, this amplifier delivers powerful and clear sound performance. With its compact design and full-range capabilities, it is ideal for enhancing your vehicle's audio experience. The Audiopipe brand is known for producing reliable and performance-driven audio products, making this amplifier a great choice for audiophiles looking to upgrade their car stereo system.

Plug and Play 4S 100A 12v 16.8v Li-ion Lithium BMS Battery Balance

By |July 22nd, 2026|

Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for Lithium-ion (Li-ion) and certain Lithium-polymer (LiPo) batteries. LiFePO4 based BMS boards are in my other listings. We offer professional design consultation and services. Please let us know about your project! Purchase price of item will be credited a full 100% towards consultation information and services. Billed @$65 per hour, in 15min increments. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre installed a screw based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 100A (burst). The following is the BMS parts list: (1) BMS Board Lithium-ion (Li-ion), Lithium-polymer (LiPo)(2) Ring Terminal Connectors M3, 8-16AWG Wire Compatibility (2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points. Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 16.8VMaximum starting current: 100AMaximum continuous current: 60ACharge current: 60AMaximum continuous current (additional solder point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x Li-ion Lithium Battery Protection Board Condition is New. Shipped with USPS First Class.

Plug and Play 4S 120A 12v 14.6v LiFePO4 BMS Battery Balance 12.8v

By |July 22nd, 2026|

Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for LiFePO4, LiFe, or LFP batteries. Lithium-ion (Li-ion)/Lithium-polymer (LiPo) based BMS boards are in my other listings. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre installed a screw based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 120A (burst). The following is the BMS parts list: (1) BMS Board LiFePO4 LiFe LFP(2) Ring Terminal Connectors M3, 8-16AWG Wire Compatibility (2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points. Battery compatibility: Voltage of 2.4V - 3.7V LiFePO4 battery typesCharging input voltage: 12V - 14.6VMaximum starting current: 120AMaximum continuous current: 60ACharge current: 60AMaximum continuous current (additional solder point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x LiFePO4 Battery Protection Board Condition is New. Shipped with USPS First Class.

[US SELLER] Taramps TS 1200×4 Car Audio Amplifier 1200W RMS 2 Ohms 4 Channels

By |July 22nd, 2026|

Please ask any and all questions before purchasing!We present the new TS 1200×4 2 Ohms. This amplifier has been carefully designed to meet the diverse needs of automotive sound systems, including internal sounds projects in the vehicle, with original players. Its new input of 4 individual channels and automatic activation, make it ideal for this type of application, eliminating the need for adapters. With 1200 watts of Power distributed in 4 channels and the possibility of connection in Bridge, it can be used with the most varied models of speakers, drivers and super tweeters. And also, it has the traditional RCA inputs, gain adjustment and fixed Crossover (HPF, LPF and Full), feature of Taramps products.

KENWOOD REFERENCE KAC-HQR1004 1200 Watts 2/3/4 Channel Amplifer 130W X 4 Rms

By |July 22nd, 2026|

The Kenwood Reference KAC-HQR1004 1200 Watts 2/3/4 Channel Amplifier delivers powerful sound performance with its 130W x 4 RMS power output. This amplifier, designed by the reputable brand Kenwood, offers 4 channels for versatile connectivity options. Made in China, this model provides clear and dynamic audio for your car audio system, enhancing your driving experience with high-quality sound reproduction.