1x MDX1800.1 1 Ohm Full Range Ultra Compact Car Amp 1800 Watts RMS at 1 Ohm. Its high power output channel allow you to install 8x 8 Ohm Speakers, drivers or tweeters in parallel at 1 Ohm, giving up to225 watts per component.
INCLUDES: 4x 6MR500-NDY-4 Midrange Loudspeaker 4 ohms The PRV Audio Pro Audio Loudspeaker, 6MR500-NDY 6MR500-NDY-4 and midrange woofer offers outstanding durability and a smooth full range response through 12,500kHz. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support. The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment. Its light weight of only 3.3 lbs helps keep your enclosures light and is a great use for car audio installers looking for high SPL midrange and upper midrange responses. For car audio enthusiast, this model is also available in 4 ohms. GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 250 Watts Program Power 500 Watts Sensitivity 2.00V at 1m 96 dB Recommended Hi Pass Crossover** **For Full Power Handling 220 Hz** **12db Per Octave Crossover Frequency Response at -10dB 90 – 13,000 Hz Voice Coil Diameter 2″ (50 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 11.2 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Die Cast Aluminum
INCLUDES:2x 69MR500-PhP-4 - HIGH SPL MIDRANGE LOUDSPEAKER PRV Audio’s 69MR500-PHP-4 midrange loudspeaker offers outstanding durability and a smooth midrange response through 12 kHz. It is a great option for three-way system requiring additional midrange support.It includes a 1 kHz high-pass filter to ensure the best possible fidelity while protecting the driver in high-power car audio installations. A high-power ceramic magnet is attached to a sturdy, reinforced cast aluminum frame to ensure a solid support structure for long-lasting play in most any environment, while the phase plug provides an incredibly smooth, high-frequency response. GENERAL SPECIFICATIONSNominal Diameter6 x 9" (152 x 228 mm)Nominal impedance4 OhmsRated AES Power Handling (RMS)250 WattsProgram Power500 WattsSensitivity 2.00V at 1m97 dBRecommended Hi Pass Crossover** **For Full Power Handling500 Hz** **12db Per Octave CrossoverFrequency Response at -10dB500 – 12,000 HzVoice Coil Diameter1.5" (38 mm)Voice Coil WireCooperVoice Coil Winding Depth8.5 mmFormer MaterialKaptonMagnetic Gap Depth5.5 mmFrame MaterialDie cast aluminum
Includes: 4x 8MB450-4 V2 8" MIDBASS LOUDSPEAKER The 8MB450-4 v2, 8" PRV Audio Pro Audio Mid bass Woofer offers smooth lower response through a punchy mid bass range and the frequency response that takes your applications smoothly through the 7,500 Hz range. The 2″ voice coil, durable spider suspension and the woven surround all supported by the sturdy steel basket ensures its ability to withstand long hours of operation without compromising efficiency of the speaker. A thick, yet light rigid cone ensures accurate response and power handling. The size and punch of this pro audio driver makes it perfect for a mid range driver in a 3 way loudspeaker cabinet or woofer in your studio monitor and even works great in home Hi-Fi installs. Also a great car audio woofer! GENERAL SPECIFICATIONS Nominal Diameter 8″ (203 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 225 Watts Program Power 450 Watts Sensitivity 2.00V at 1m 93.5 dB Recommended Hi Pass Crossover** **For Full Power Handling 120 Hz** **12db Per Octave Crossover Frequency Response at -10dB 75 – 7,500 Hz Voice Coil Diameter 2″ (50 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 12.0 mm Former Material Kapton Magnetic Gap Depth 6.0 mm Frame Material Stamped Steel
Pair PRV Audio 8MB450-4 v2 8" Mid Bass 2 x Woofers 4 Ohms Midbass Speaker - PRV 8 in The 8MB450-4 v2 8" PRV Audio Mid Bass Woofer ffers smooth lower response through a punchy mid bass range and the frequency response that takes your applications smoothly through the 7,000Hz range. The size and punch of this driver makes it perfect for a mid range driver in a 3 way cabinet or woofer in your studio monitor. GENERAL SPECIFICATIONS Nominal Diameter 8″ (203 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 225 Watts Program Power 450 Watts Sensitivity 2.00V at 1m 93.5 dB Recommended Hi Pass Crossover** **For Full Power Handling 120 Hz** **12db Per Octave Crossover Frequency Response at -10dB 75 – 7,500 Hz Voice Coil Diameter 2″ (50 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 12.0 mm Former Material Kapton Magnetic Gap Depth 6.0 mm Frame Material Stamped Steel EXTRA INFO Overall Diameter 8.27” (210 mm) Front Mount Baffle Cutout 7.17” (182 mm) Mounting Depth 3.31” (84 mm) Overall Depth 3.61” (91.5 mm) Net Weight 4.10 Lbs (1.86 kg) Shipping Weight 4.54 Lbs (2.06 kg) Carton Dimensions W x L x H 9.05” x 9.05” x 4.72” (230 x 230 x 120 mm)
Also Available at 8 Ohm –8MB450 v2. The new Version 2 has improved its motor and basket design. Now featuring a new copper-clad aluminum voice coil for low moving mass to increase efficiency. PRV 8″ Midbass Car Speaker 8MB450-4 v2 PRO Audio 450 Watts / 4 Ohm.
INCLUDES1480 Watts Package - 4x 6MR250B-4 SLIM speakers 250 Watts Each + TW350Ti-4 SLIM ( PAIR ) Tweeters 120 Watts Each - Total of 4 speakers and 4 tweeters. FEATURES6MR250B-4 SLIMThe MR SLIM series was designed as PRO Audio On Wheels solution for shallow doors, featuring an Aluminum Phase Plug (Bullet). This mid is built like a professional mid range loudspeaker, but it has been designed for use in the mobile audio market, as we called it Pro Audio On Wheels!By combining elements from PRO Audio and Car Audio we have developed a NEW type of high efficient mid range that is able to give high levels of output from stock speaker location in your car.Highlights – 6MR250B-4 SLIMSlim Design – Perfect for door stock locationSound Quality without Cutting up interior PanelsEndurance at Loudest VolumesVented Air pole piece for heat dissipationCenter phase plug for even sound distribution4 Ohms ImpedanceAlso available in 8″- 8MR400B-4 Slim GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance4 OhmNominal Power Handling*125 WattsContinuous Program Power (RMS)**250 WattsMax Peak Power***500WattsSensitivity 2.00V at 1m93.5 dBRecommended Hi Pass Crossover For Full Power Handling145 Hz 12db Per Octave CrossoverFrequency Response145 – 8,000 HzVoice Coil Diameter1.5″ (38 mm)Voice Coil WireCCAWVoice Coil Winding Depth9.5 mmFormer MaterialKaptonMagnetic Gap Depth6.0 mmFrame MaterialStamped SteelEXTRA INFOOverall Diameter6.50″ (165 mm)Front Mount Baffle Cutout5.67″ (144 mm)Mounting Depth2.14″ (54.5 mm)Overall Depth2.38″ (60.5 mm)Net Weight3.53 Lbs (1.60 kg)Shipping Weight3.96 Lbs (1.80 kg)Carton Dimensions W x L x H6.89″ x 6.89″ x 2.95″ (175 x 175 x 75 mm)TW350Ti-4 SLIM (PAIR)The PRV Audio TW350Ti-4 SLIM Super Tweeter offers a smooth response and extremely high efficiency from mid range through high range frequencies. This tweeter a little brother of TW350Ti a Popular choice for HIGH SPL super Tweeter.Highlights – TW350Ti-4 SLIMThe low mass CCAW voice coil at 4 ohmsCrystal Clear High Frequency ResponseHigh Output – 104 dB sensitivitySlim Design easy to MountSold in PairsThe Titanium diaphragm is on a Kapton former is light, thin and durable for long play applications. The tweeter is perfect for Pro A applications. The sharp smooth sound is perfect for applications where larger compression drivers may over power a venue.TW350Ti-4 SLIM is designed with cast aluminum frame to ensure a quality sound and long lasting play in most any environment. Replacement Diaphragms available.GENERAL SPECIFICATIONSNominal impedance4 OhmsNominal Power Handling*60 WattsContinuous Program Power(RMS)**120 WattsMax Peak Power***240 WattsSensitivity 2.00V at 1m104 dBRecommended Hi Pass CrossoverFor Full Power Handling5000 Hz 12dbPer Octave CrossoverFrequency Response at -10dB4,500 – 20,000 HzVoice Coil Diameter1.0” (25 mm)Voice Coil WireCCAWVoice Coil Former MaterialKaptonDiaphragm MaterialTitaniumFlux Density1.45 TMagnet MaterialFerriteEXTRA INFOOverall Depth1.67” (42.5 mm)Mounting Depth1.32” (33.5 mm)Overall Width3.21” (81.5 mm)Overall Height3.50” (89 mm)Cutout Diameter + Terminals2.83” (75 mm)Net Weight1.37 lbs (0.62 kg)Shipping Weight1.47 lbs (0.67 kg)Carton Dimensions W x L x H3.75” x 7.10” x 2.00” (95 x 180 x 50 mm)
INCLUDES: 2x 6MR400-4 BULLET 6" Mid Range Bullet Loudspeakers FEATURES: The MR BULLET was conceived with one goal in mind: High-Performance! Featuring an Aluminum Phase Plug (Bullet), this mid is built like a professional mid range loudspeaker, but it has been designed for use in the mobile audio market, as we called it Pro Audio On Wheels®!! By combining elements from PRO Audio and Car Audio, we have developed a NEW type of high efficient mid range that is able to give high levels of output for your custom door. Highlights Built to Perform at Wide Frequency Range: 145 – 12,500 Hz Highest Quality Speaker with bullet design available High efficiency: 95 dB guarantees High Output Levels Handles 400 Watts – Endurance at Loudest Volumes Vented Air pole piece for heat dissipation Center phase plug for even sound distribution 4 Ohms Impedance Also available in 8″- 8MR500-4 BULLET The “bullet” phase plug is made from pure aluminum acting as a radiator cooling system for the voice coil and machined to perfection for even sound dissipation. Beyond good looks, this cone is extremely light, providing excellent damping to keep an incredibly natural yet accurate sound. A triple roll cloth surround, combined with an optimized fiber pressed paper cone, ensure the speaker’s frequency response is smooth and extends to high range making an easy transition to a super tweeter, but according to customers, the high-frequency response from this speaker does NOT need support from a tweeter! The suspension design of this mid range features a single layer spider – which connects to the coil former with premium stitched lead wires, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling. Its high-performance characteristics and high-quality components provide exceptional clarity, detail, and dynamics sound. You can expect outstanding sound stage quality and realistic sound reproduction for a great value. This is the new standard of value in high-performance bullet speakers. Built to perform and able to handle 400 watts of continuous power, this mid range is the perfect match on 3-way custom door system such as: 10W500-4 + 6MR400-4 BULLET + TW450Ti-ND-4 making the ultimate sound reproduction machine, with unbeatable sound quality and output. Technical Details GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 200 Watts Program Power 400 Watts Sensitivity 2.83V at 1m 95 dB Recommended Hi Pass Crossover** **For Full Power Handling 145 Hz** **12db Per Octave Crossover Frequency Response at -10dB 145 – 12,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 9.5 mm Former Material Kapton Magnetic Gap Depth 6.0 mm Frame Material Stamped Steel THIELE-SMALL PARAMETERS Equivalent Volume Vas 4.40 l Excursion (mathematical)*** Xmax 3.25 mm Free Air Resonance Fs 144.1 Hz Mechanical Factor Qms 11.98 Electrical Factor Qes 0.64 Total Factor Qts 0.60 Cone Area Sd 143 cm² Mechanical Mass Mms 7.94 g Bl Factor Bl 6.37 Tm Dc Resistance Re 3.6 Ohms Inductance Le 0.136 mH at 1 kHz Mechanical Mass Without Air Mmd 6.97 g Mechanical Compliance Cms 0.154 mm/N EXTRA INFO Overall Diameter 6.59″ (167.5 mm) Front Mount Baffle Cutout 5.65″ (143.5 mm) Mounting Depth 2.62″ (66.5 mm) Overall Depth 2.99″ (73.5 mm) Net Weight 4.81 Lbs (2.18 kg) unit Shipping Weight 5.18 Lbs (2.35 kg) Carton Dimensions W x L x H 8.50″ x 8.50″ x 3.35″ (175 x 175 x 85 mm)
INCLUDES: 1x 6MR500CF-NDY-4 Water Resistant Speaker 6" Neodymium Carbon Fiber Loudspeaker (SOLD IN PAIR) - Total of two speakers - 1000 Watts package - 500 Watts each speaker FEATURES: The MR500CF-NDY series was designed for Power sports applications, featuring a water-resistant design to ensure optimum performance taking into account the effects of the outdoor environment! Ideal for upgrading your sound system in your boat, UTV, 4-wheeler, or motorcycle, this midrange speaker becomes the new standard in vocal reproduction for outdoor applications. Constructed of high-end materials like a carbon fiber cone, high-temperature voice coil, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion.Water Resistant with true PRO audio midrange performanceDamped carbon fiber cone lowers moving mass and minimizes unwanted resonancesLow inductance and extended frequency responsePowerful neodymium magnet structure features distortion-canceling fixturesFast transient response, minimal tonal coloration, and deep, dynamic midbassSold in pairs – Grill and screws are includedAlso available in 8″ –8MR600CF-NDY-4The tailored response of the 6MR500CF-NDY-4 comes from its exotic yet supremely engineered carbon fiber cone that delivers the signature PRV audio combination of depth and accuracy on vocal reproduction. Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound.A rubber surround and large flat spider suspend the cone and keep it linear through the limits of excursion with minimal restriction, further improving dynamics and transients.The suspension design of this midrange features the single layer spider – which connects to the coil former with premium stitched lead wires, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling, complemented by a high-power neodymium radial slugs that immerse the voice coil in a strong magnetic field.You can expect excellent off-axis and transient response from this water-resistant midrange for a great sound stage and realistic sound reproduction.Built for loud, clear vocal performance in tight, compact spaces, PRV Audio’s 6MR500CF-NDY-4 neodymium-powered midrange features a sensitivity of 96 dB (2.83V/1m) and weighs about 3.85 pounds! 4 ohm impedance. PRO Audio On Wheels Series is dedicated to delivering outstanding pro audio performance to your motorsports application.A bumped back plate, vented magnet system, vented pole piece, high-temperature voice coil, allow for high power handling while protecting this driver from extreme transient power peaks.GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance4 OhmNominal Power Handling250 WattsContinuous Program Power (RMS)500 WattsMax Peak Power1000 WattsSensitivity 2.83V at 1m96 dBRecommended Hi Pass Crossover** **For Full Power Handling95 Hz** **12db Per Octave CrossoverFrequency Response95 – 11,000 HzVoice Coil Diameter2.0″ (50.8 mm)Voice Coil WireCCAWVoice Coil Winding Depth10.0 mmFormer MaterialKaptonMagnetic Gap Depth7.0 mmFrame MaterialStamped SteelTHIELE-SMALL PARAMETERSEquivalent VolumeVas5.14 lExcursion (mathematical)***Xmax3.25 mmFree Air ResonanceFs92.5 HzMechanical FactorQms12.85Electrical FactorQes0.29Total FactorQts0.28Cone AreaSd143 cm²Mechanical MassMms16.49 gBl FactorBl10.73 TmDc ResistanceRe3.5 OhmsInductanceLe0.185 mH at 1 kHzMechanical Mass Without AirMmd15.52 gMechanical ComplianceCms0.179 mm/N EXTRA INFOOverall Diameter6.55″ (166.5 mm)Front Mount Baffle Cutout5.72″ (145.5 mm)Mounting Depth2.91″ (74 mm)Overall Depth3.29″ (83.5 mm)Net Weight3.85 Lbs (1.75 kg) unitShipping Weight9.15 Lbs (4.15 kg) pairCarton Dimensions W x L x H15.7″ x 8.26″ x 5.12″ (400 x 210 x 130 mm)
INCLUDES: 2x 4MR60-4 4" MIDRANGE LOUDSPEAKER Features The 4MR60-4 full range speaker delivers broad frequency coverage and flat midrange response that ensures vocals and instruments to deliver ideal sound. The 4″ midrange speaker 4MR60-4 is a pro audio midrange with very high sensitivity and a smooth extended frequency response up to 8 kHz. The small dimensions and high output make it very useful to use in compact line array systems as a transition between the mid bass and high frequency way. Each material and component such as the woven fiberglass cone, large spider, and rubber surround is carefully chosen to ensure great sound quality and low distortion. The 4MR60-4 even operates at high power. It is also applicable in home theaters, satellites, and surround speakers as well as in car audio when you are limited in space and require extended frequency response. Each material and component such as the woven fiberglass cone, large spider, and rubber surround is carefully chosen to ensure great sound quality and low distortion, it even operates at high power. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 30 Watts Program Power: 60 Watts Sensitivity (1W/1m): 90 dB Voice Coil Diameter: 0.78″ Technical Details GENERAL SPECIFICATIONS Nominal Diameter 4” (101.6 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 30 Watts Program Power 60 Watts Sensitivity 2.00V at 1m 90 dB Recommended Hi Pass Crossover* *For Full Power Handling 190 Hz** **12db Per Octave Crossover Frequency Response at -10dB 90 – 15,000 Hz Voice Coil Diameter 0.78” (20 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 7.5 mm Former Material Kapton Magnetic Gap Depth 3.5 mm Frame Material Stamped Steel THIELE-SMALL PARAMETERS Equivalent Volume Vas 3.26 l Excursion (mathematical)*** Xmax 2.87 mm Free Air Resonance Fs 89.88 Hz Mechanical Factor Qms 7.34 Electrical Factor Qes 0.75 Total Factor Qts 0.68 Cone Area Sd 57 cm² Mechanical Mass Mms 4.32 g Bl Factor Bl 3.42 Tm Dc Resistance Re 3.6 Ohms Inductance Le 0.20 mH at 1 kHz Mechanical Mass Without Air Mmd 4.07 g Mechanical Compliance Cms 0.725 mm/N EXTRA INFO Overall Diameter 4.96” (126 mm) Front Mount Baffle Cutout 4.02” (102 mm) Mounting Depth 2.20” (56 mm) Overall Depth 2.36” (60 mm) Net Weight 1.15 Lbs (0.52 kg Shipping Weight 1.24 Lbs (0.56 kg) Carton Dimensions W x L x H 4.68” x 4.68” x 3.15” (119 x 119 x 80 mm)