PRV Audio MDX1800.1 2 Ohm MINI 1 Channel Car Audio Amplifier 1800 Watts RMS at 2 Ohm – Full Range Ultra Compact Amp. Its high power output channel allow you to install 4x 8 Ohm Speakers, drivers or tweeters in parallel at 2 Ohm, giving up to 450 watts per component.
1x MDX1200.4 2 Ohm 4 Channel Car Audio Amplifier 4 x 300 Watts RMS at 2 Ohm – Ultra Compact Stereo Amp. Its high power output channels allow you to install 4x 8 Ohm speakers, drivers or tweeters in parallel per channel, giving up to75 watts per component.
Say goodbye to guesswork and loose installs. • 6.5" Speaker Grill. This is not just about looks, it is about serious protection. Perfect Fit, Zero Hassle.
The grill fits the following PRV Models: 69FR250-4, 69CX380-4, 69MR500-PhP-4, 69MR500-4 BULLET, 69MR500CF-NDY-4.
INCLUDES:1 EX4.6 PRO ELECTRONIC CROSSOVER FEATURES:Bringing innovation and technology to the automotive sound market, PRV Audio launches the EX4.6 PRO electronic crossover, giving you the power to customize your sound with a wide frequency of filter adjustments. Featuring 4-way adjustable HIGH PASS and LOW PASS filters and also output level control on each channel, plus adjustable BASS-BOOST option on the Sub Out channel. Enhancing Your Audio System! Highlights2/3/4 RCA Input Signal Options9 Volts RMS maximum outputBass Boost 0 to 12dB set at 45HzQuick On/Off button for each channelCrossover slope rate: Butterworth 12 db/OctaveInput and output Functions:– 2/3/4 RCA inputs for 3 Channels – 1 Stereo and 2 Mono– 6 RCA outputs for 4 Channels – 2 Stereo and 2 Mono Crossover Functions:– High Pass Filter allows adjustment:It determines the beginning of the channel operating frequency.This filter allows the amplifier to work with many different applications such as: Woofer / Midbass / Midrange / Compression Driver components allows the elimination of low frequency sounds, delivering the right frequency range to avoid damage to the components.– Low Pass Filter allows adjustment:It determines the end of the channel operating frequency.This filter allows you to fine tune the amplifier frequency response to match to the components’ frequency response. This ensures that only the lowest frequencies are reproduced by the amplifier.– Bass Boost allows adjustment:Bass Equalizer: provides a “gain attenuation” 0 to + 12dB at center frequency of 45Hz .– On/Off Buttons:This button allows to quick turn On and Off each individual channel.– Level knobs:This control adjusts the output signal on channel; which allows an optimal adjustment to the output signal levels to the amplifiers. HIGH OUT channel: This Stereo output channel take signal from the FRONT IN stereo inputs– HIGH PASS filter from 400Hz to 10,000HzRecommended application: Tweeters, Titanium Compression Drivers and Super Tweeters.MID HIGH OUT channel: This Stereo output channel take signal from the FRONT IN stereo inputs– HIGH PASS filter from 150Hz to 5,000Hz– LOW PASS filter from 700Hz to 12,000HzRecommended application: Compression Drivers and Mid Range Speakers. MID LOW OUT channel: This mono output channel take signal from the FRONT IN or MID LOW IN input.– HIGH PASS filter from 25Hz to 4,000Hz– LOW PASS filter from 300Hz to 9,000HzRecommended application: Phenolic Compression Drivers, Woofer, Mid Bass and Mid Range Speakers. SUB OUT channel: This mono output channel take signal from the FRONT IN or SUB IN input.– LOW PASS filter from 55Hz to 300Hz– BASS BOOST gain + 12dB at center frequency of 45HzRecommended application: Woofer and Subwoofers. Technical DetailsGENERAL SPECIFICATIONS High Out ChannelHigh Pass – 400Hz – 10KHz (12dB/8a)Mid High Out ChannelHigh Pass – 150Hz – 5KHz (12dB/8a)Mid Low Out ChannelHigh Pass – 25Hz – 3KHz (12dB/8a)Sub Out ChannelLow Pass – 50Hz – 250KHz (12dB/8a) Bass Boost – 25Hz – 110Hz (0 – +12dB; 45Hz)Maximum Output Voltage9V RMSMaximum Input Voltage4V RMSSignal to Noise>90dBInput Impedance10K OhmsHarmonic Distortion 80dBFrequency Response20Hz-200KHzSupply Voltage10V – 16V DCCurrent Consumption200mAImpedance Output470 OhmsDimensions (H x W x L)1.30″ x 9″ x 6.30″Weight1.45 Lbs
PRV Audio is proud to present our new MOTO Series MT6MR600CF-NDY-2, high performance 6.5″ speaker dedicated for motorsports installations, focused on utilizing all the power from a 2 or 4 channel amplifier, with 1 speaker per channel to match the amplifier’s lowest impedance and maximum power output.
INCLUDES: 2x MT6MR400CF-NDY-4 SLIM 6.5" Water Resistant Carbon Fiber Motorcycle Speaker - 800 Watts package - 400 Watts each speaker FEATURES: PRV Audio is proud to present our new MOTO Series (MT), high performance PRO audio line dedicated for motorsports installations, focused on bringing to you the latest innovative materials and components to resist weather conditions and to provide the highest sound reproduction possible.This midrange loudspeaker established the new benchmark for vocal reproduction for outdoor applications, making it ideal for improving the sound system in your boat, UTV, 4 wheeler, Slingshot or Motorcycle.Due to the premium materials used in its construction, such as a carbon fiber cone, a high-temperature voice coil, and a strong neodymium magnet motor, this speaker produces its natural sound with remarkably low distortion.Water Resistant Speaker with true PRO audio Midrange PerformanceCarbon Fiber Cone with Coated Suspension to Handle Outdoor ApplicationsFull Range Sound, its Low inductance Technology extends its frequency response up to 12,000 HzHigh Output Speaker for 4 Wheelers, Slingshots, and Motorcycles that mounts in practically every stock locationBuilt for Compact Applications with only 2.22′′ of mounting depth Without Sacrificing Quality or PerformanceGrill and screws are included. Also available in 8″ – MR8MR400CF-NDY-4 SLIM Aside from its attractive appearance, this carbon fiber cone is exceptionally light, surprisingly rigid, and provides great damping to keep narrow peaks under control.Despite its extremely compact design, our technical team was able to achieve precision in the vocal reproduction range, resulting in the famous PRV audio PRO Audio sound.A special treated surround and flat spider suspend the cone and keep it linear through the limits of excursion with minimal restriction, further improving dynamics and transients.This midrange features many premium components, one of which is stitched lead wires, which connect the voice coil to the terminals through a single layer spider suspension, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling, complemented by a high strength neodymium motor that immerses the voice coil in a strong magnetic field.You can expect excellent off-axis and transient response from this water-resistant speaker for a great, controlled sound, making an easy transition to a super tweeter. Built for loud, clear vocal performance in tight, compact spaces, PRV Audio’s MT6MR400CF-NDY-4 SLIM midrange features a sensitivity of 95 dB (2.00V/1m) and weighs about 1.63 pounds! 4 ohm impedance.MOTO series is dedicated to delivering outstanding pro audio performance to your motorsports application.Everything about this speaker has been designed for reliable and consistent high output levels in a wide frequency bandwidth between 120 and 12,000 Hz, giving you the option of eliminating the need for a super tweeter on your system!PRV 6.5″ Carbon Fiber Motorcycle Speaker MT6MR400-NDY-4 SLIM Water Resistant Neodymium Midrange 400 Watts / 4 Ohm GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance4 OhmNominal Power Handling*200 WattsContinuous Program Power (RMS)**400 WattsMax Peak Power***800 WattsSensitivity 2.00V at 1m95 dBRecommended Hi Pass Crossover *For Full Power Handling120 Hz* *12db Per Octave CrossoverFrequency Response120 – 12,000 HzVoice Coil Diameter1.5″ (38 mm)Voice Coil WireCCAWVoice Coil Winding Depth10.0 mmFormer MaterialKaptonMagnetic Gap Depth5.0 mmFrame MaterialStamped Steel THIELE-SMALL PARAMETERSEquivalent VolumeVas3.38 lExcursionXmax***3.75 mmFree Air ResonanceFs138.9 HzMechanical FactorQms6.76Electrical FactorQes0.68Total FactorQts0.62Cone AreaSd139 cm²Mechanical MassMms10.47 gBl FactorBl6.85 TmDc ResistanceRe3.5 OhmInductanceLe0.168 mH at 1 kHzMechanical Mass Without AirMmd9.55 gMechanical ComplianceCms0.125 mm/N EXTRA INFOOverall Diameter6.50″ (165 mm)Front Mount Baffle Cutout5.65″ (146.6 mm)Mounting Depth2.22″ (56.5 mm)Overall Depth (with grill)3.22″ (82 mm)Net Weight1.63 Lbs (0.73 kg)Shipping Weight1.98 Lbs (0.9 kg)Carton Dimensions W x L x H8.54″ x 8.11″ x 4.25″ (217 x 206 x 108 mm)
PRV Audio is proud to present our MT8CX680-NDY-4 Coaxial Speaker from the MOTO Series (MT), high performance PRO audio line dedicated to motorsports installations. PRV Audio 8 Coaxial Speaker Neodymium MT8CX680-NDY-4 Full Range 2-Way Motorcycle Carbon Fiber Speaker.
PRV Audio speaker wire provides an easy installation solution for premium performance for car audio systems. Carefully engineered and produced from selected materials, PRV Technoise cables won’t let you down.
PRV Audio speaker wire provides an easy installation solution for premium performance for car audio systems. Carefully engineered and produced from selected materials, PRV Technoise cables won’t let you down.