Glass Fiber – Capital Tower

4x PRV Audio 10MB800FT Midbass Speakers FORTE Car PRO Audio 10″ 8 Ohms 800 Watts

By |2026-07-23T10:46:04+00:00July 23rd, 2026|

INCLUDES: 4 - 10MB800FT - 10" MIDBASS LOUDSPEAKER Features For high output speaker systems, PRV Audio’s 10MB800FT mid-bass is an excellent option capable of amazing performance. A great new addition to the Forte Series, where more power handling and less distortion on mid-low mid-bass frequencies is the key. The 10MB800FT is a rugged 10″ mid-bass that combines mid-bass punch and mid clarity at remarkable SPL output with low distortion and extended mid-bass response. Optimized for use in compact enclosures, this mid-bass speaker provides a smooth vocal response with great output from 500 Hz to 1500 Hz and useful response up to 6,500 Hz, making it a great choice for larger 2 and 3 way systems. Highlights 2.5″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms Ventilated voice coil gap reduces power compression High Xmax for more mid-bass output 800 watts continuous program power rating makes the high acoustical output Excellent performance in 2-way or 3-way systems To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker. The Perfect speaker for TUKUTEO sound. The high sensitivity rating of 99 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great mid-bass option for pro audio systems or high SPL automotive systems, where extremely high output is required. The voice coil is wound on a 2.5″ glass fiber with aluminum wire keeping weight to a minimum for incredibly quick transient response. Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability. Popular Combination with the 10MB800FT is the WG2500Ti Titanium Compression Driver – with Our DSP 2.8x ( digital sound processor ) the PRO Audio On Wheels systems can easily tune both components to blend in together with the following settings: 10MB800FT – High Pass Filter HPF 95 Hz BT18 Filter to Low Pass Filter LPF 1800 Hz BT12 Following the compression driver from 1200Hz all way to 17,000Hz Recommended system package 8x 10MB800FT + 4x WG2500Ti Technical Details GENERAL SPECIFICATIONS Nominal Diameter 10″ (254 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 400 Watts Program Power 800 Watts Sensitivity 2.83V at 1m 99 dB Recommended Hi-Pass Crossover** **For Full Power Handling 120 Hz** **12db Per Octave Crossover Frequency Response at -10dB 65 – 6,500 Hz Voice Coil Diameter 2.5″ (65 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 11.0 mm Former Material Glass Fiber Magnetic Gap Depth 8.0 mm Frame Material Die-Cast Aluminum

2x PRV Audio 10MR2000-NDY 10″ Midrange Speakers 4000 Watts Neodymium 8 Ohm PRO

By |2026-07-23T10:46:02+00:00July 23rd, 2026|

INCLUDES 2x PRV Audio 10MR2000-NDY 10" Midrange Loudspeaker - 4000 Watts Package - 2000 Watts Each Speaker FEATURES The PRV Audio 10MR2000-NDY midrange offers outstanding durability and is our most powerful midrange loudspeaker with a 4 inch voice coil. This mid is an ideal option for high power 2 or 3-way systems. It produces excellent vocal support for stage monitors, custom car doors and stuntwalls.A powerful neodymium motor keeps size and weight to a minimum to make it easy to install this mid in any system, even when you are short on space.Highlights4″ Inside/Out copper clad voice coil wound on fiberglass former for high-temp performance – 8 OhmOne of the most outstanding pro audio midrange for high SPL systems, this 2000 Watts 10″ midrange is one beast of a speaker!Excellent performance in compact enclosures and custom car door panels.During hard play, the large 4″ voice coil provides very high efficiency while providing smooth and accurate midbass response.All in all, the PRV Audio 10MR2000-NDY midrange is a great choice for anyone looking for a reliable, powerful midrange loudspeaker.With excellent damping characteristics, the lightweight paper cone and accordion surround give this driver smooth response from 90 to 6,500 Hz for that incredibly clear vocal response that PRV midranges are known for.The 4″ voice coil is wound on a fiberglass former to withstand enough heat to handle 2,000 watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP160 Hz at 12 dB per octave filter Crossover / BT12145 Hz at 18 dB per octave filter Crossover / BT18The extensive venting through the motor and cast aluminum frame helps to dissipate that heat to keep power compression low even after extended periods of high output. GENERAL SPECIFICATIONSNominal Diameter10″ (254 mm)Nominal impedance8 OhmNominal Power Handling*1000 WattsContinuous Program Power (RMS)**2000 WattsMax Peak Power***4000 WattsSensitivity 2.00V at 1m99 dBRecommended Hi Pass Crossover For Full Power Handling160 Hz 12db Per Octave CrossoverFrequency Response90 – 6,500 HzVoice Coil Diameter4″ (101 mm)Voice Coil WireCCAWVoice Coil Winding Depth14.5 mmFormer MaterialGlass FiberMagnetic Gap Depth9.0 mmFrame MaterialDie Cast Aluminum THIELE-SMALL PARAMETERSEquivalent VolumeVas27.98 lExcursionXmax***5.00 mmFree Air ResonanceFs54.48 HzMechanical FactorQms1.54Electrical FactorQes0.21Total FactorQts0.21Cone AreaSd373 cm²Mechanical MassMms59.33 gBl FactorBl21.73 TmDc ResistanceRe5.0 OhmInductanceLe0.50 mH at 1 kHzMechanical Mass Without AirMmd35.96 gMechanical ComplianceCms0.143 mm/N EXTRA INFOOverall Diameter10.43″ (265 mm)Front Mount Baffle Cutout9.33″ (237 mm)Mounting Depth5.08″ (129 mm)Overall Depth (with grill)5.49″ (139.5 mm)Net Weight12.78 Lb (5.8 kg)Shipping Weight14.55 Lb (6.6 kg)Carton Dimensions W x L x H12.6″ x 12.6″ x 7.8″ (320 x 320 x 195 mm)

2x PRV 10″ Motorcycle Low Frequency Woofer 2400W 4 Ohm MT10W1200 Water Resistant

By |2026-07-22T13:44:03+00:00July 22nd, 2026|

INCLUDES: 2x MT10W1200-NDY-4 10" Water Resistant Motorcycle Woofer - 2400 Watts Package - 1200 Watts each Woofer FEATURES: Moto Series MT10W1200-NDY-4 has been engineered to give your custom motorcycle saddlebags the ultimate low frequency midbass response, considering the tough environment on the roads.PRV Audio is proud to present our new MOTO Series (MT), high performance PRO audio line dedicated for motorsports installations, focused on bringing to you the latest innovative materials and components to resist weather conditions and to provide the highest sound reproduction possible.HighlightsOptimized for use in compact enclosures this mid is ideal for motorcycle saddlebags1,200 watts RMS power makes high acoustical outputRubber Surround allows a generous 1.65″ peak-to-peak excursionPowerful neodymium magnet structure features distortion-canceling fixturesFast transient response, deep low tones and dynamic mid bassWeather-resistant paper cone and dust cap with true PRO audio midbass performanceThe MT10W1200-NDY-4 sets a new performance standards that combines durability, efficiency, and maximum displacement into a great looking midbass speaker that will deliver the deepest low frequency response with power and authority.Custom tooled surround allows long throw while maximizing cone surface area, to get superior fidelity and high efficiency!The special composite cone is built with non-pressed paper for reduced break-up and treated to be water resistant, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker, with a generous 1.65″ peak-to-peak excursion before damage.Extensive motor venting cools the voice coil enabling high power handling with low power compression. The large 3″ voice coil allows for 1200 Watts of Amplifier RMS Power, and warrants the outstanding cooling system implemented into the motor.Its powerful optimized neodymium motor is vented to provide excellent cooling for its voice coil. This neo magnet also helps decreasing the weight on the speaker comparing to a ferrite magnet motor. This compact design will fit and sound great on any saddlebag that has about 1 cubic feet. Able to stand up to the use and abuse on bike sound competitions its 3″ voice coil that is wound inside-outside on a fiberglass former features a generous 18 mm winding length for extended Xmax and less distortion.High sensitivity rating of 97 dB 1W/1M which makes it capable of generating a lot of output! GENERAL SPECIFICATIONSNominal Diameter10″ (254 mm)Nominal impedance*4 OhmNominal Power Handling**600 WattsContinuous Program Power (RMS)1200 WattsMax Peak Power***2400 WattsSensitivity 2.00V at 1m97.0 dBRecommended Hi Pass Crossover* *For Full Power Handling65 Hz* *12db Per Octave CrossoverFrequency Response40 – 4,000 HzVoice Coil Diameter3″ (76 mm)Voice Coil WireCCAWVoice Coil Winding Depth18.0 mmFormer MaterialGlass FiberMagnetic Gap Depth10.0 mmFrame MaterialDie Cast AluminumTHIELE-SMALL PARAMETERSEquivalent VolumeVas41.24 lExcursion (mathematical)***Xmax6.5 mmFree Air ResonanceFs46.9 HzMechanical FactorQms7.94Electrical FactorQes0.31Total FactorQts0.30Cone AreaSd373 cm²Mechanical MassMms54.1 gBl FactorBl12.29 TmDc ResistanceRe3.0 OhmInductanceLe0.376 mH at 1 kHzMechanical Mass Without AirMmd50.0 gMechanical ComplianceCms0.212 mm/N EXTRA INFOOverall Diameter10.27” (261 mm)Front Mount Baffle Cutout9.05” (230 mm)Mounting Depth4.49” (114 mm)Overall Depth5.00” (127 mm)Net Weight8.38 Lbs (3.8 kg)Shipping Weight9.95 Lbs (4.5 kg)Carton Dimensions W x L x H11.25”x 11.5” x 6” (286 x 292 x 152 mm)