JK BMS, they are smart therefore with bluetooth and are equipped with a built-in active balancer, this will allow you to always have balanced cells and battery with full capacity. 1 JK smart bms (Built-in Bluetooth).
JK BMS 8S-24S 24V-72V 150A Li-ion LiFePo4 BMS with 2A ActiveBalance BT/RS485 lot. JK BMS 8S-24S 24V-72V 150A Li-ion LiFePo4 BMS with 1A ActiveBalance BT/RS485 lot. JK BMS, they are smart therefore with bluetooth and are equipped with a built-in active balancer, this will allow you to always have balanced cells and battery with full capacity.
Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for Lithium-ion (Li-ion) and certain Lithium-polymer (LiPo) batteries. LiFePO4 based BMS boards are in my other listings. We offer professional design consultation and services. Please let us know about your project! Purchase price of item will be credited a full 100% towards consultation information and services. Billed @$65 per hour, in 15min increments. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre installed a screw based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 100A (burst). The following is the BMS parts list: (1) BMS Board Lithium-ion (Li-ion), Lithium-polymer (LiPo)(2) Ring Terminal Connectors M3, 8-16AWG Wire Compatibility (2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points. Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 16.8VMaximum starting current: 100AMaximum continuous current: 60ACharge current: 60AMaximum continuous current (additional solder point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x Li-ion Lithium Battery Protection Board Condition is New. Shipped with USPS First Class.
Note: This BMS is a custom model that comes pre-assembled for easy install (no soldering needed) and is for Lithium-ion (Li-ion)/Lithium-polymer (LiPo), 3.7v/4.2v cells. Description:This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre-installed a screw-based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 100A (burst). The following is the BMS Easy Connection Kit parts list:(1) BMS Board for Lithium-ion (Li-ion)/Lithium-polymer (LiPo)(1) Pre-installed balance wire connection block, 18-24AWG Wire Compatibility (4) Ring Terminal Connectors M3, 8-16AWG for Dual Wire Compatibility (2) Ring Terminal Screws and Nuts *Wires are not included. Balance wires of 18-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. You can use a dual wire setup at the main connection points of (B-) and (C-) for heavy duty power draw. 3S 12v (12.6v) Lithium BMS Board BMS Operation Type Common Port (Charge/Discharge) BMS Cell Voltage Type 3S (3.7v/4.2v), 12v – 12.6v Discharge Continuous Amps (Max) Up to 60A, 750W Discharge Surge Amps (Max) Up to 100A, 1250W Discharge Voltage Limit Cutoff 2.7v per Cell, Smart Sense™ Cell 5% Reset Discharge Protection Cutoff Connect Charge or Short B- to P- Charge Voltage 12.6v (Max) Charge Amps (Max) Up to 60A, 750W Charge Voltage Limit Cutoff 4.2v per Cell, Smart Sense™ Cell 99% Balancing Voltage 4.15 per Cell Balancing Amps 60mA per Series Temperature Cutoff Protection Use NTC Probe Connection 85*C Short Circuit Yes, Protection Active Board Size 60mm*42mm Battery compatibility: Voltage of 2.7V (Empty) - 4.2V (Full Charge) Li-ion battery typesCharging input voltage: 12.6VMaximum starting current: 100A (Max)Discharge continuous current: 60A (Max)Charge current: 60A (Max)Board Size: approx. 42*60*7.4mmPackage includes: 1 x BMS Board Li-ion, 1 x Easy Connection Kit, 1 x Wiring Connection Guide Condition is New. Shipped with USPS First Class.
Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for LiFePO4, LiFe, or LFP batteries. Lithium-ion (Li-ion)/Lithium-polymer (LiPo) based BMS boards are in my other listings. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre installed a screw based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 120A (burst). The following is the BMS parts list: (1) BMS Board LiFePO4 LiFe LFP(2) Ring Terminal Connectors M3, 8-16AWG Wire Compatibility (2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points. Battery compatibility: Voltage of 2.4V - 3.7V LiFePO4 battery typesCharging input voltage: 12V - 14.6VMaximum starting current: 120AMaximum continuous current: 60ACharge current: 60AMaximum continuous current (additional solder point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x LiFePO4 Battery Protection Board Condition is New. Shipped with USPS First Class.
JK BMS, they are smart therefore with bluetooth and are equipped with a built-in active balancer, this will allow you to always have balanced cells and battery with full capacity. 1 JK smart bms (Built-in Bluetooth).