DALY Smart Active Balance BMS 200A 24V-60V 8S-17S Built-in Bluetooth
It also has cloud monitoring and data logging capabilities.
Daly Smart BMS 4S 12V/8S 24V/16S 48V 100A-250A LiFePo4 BMS &Bluetooth Module lot
Charging current: 100A,150A, 200A, 250A. 1 DALY SMART BMS. What material your battery is?. Q: Is this BMS suit for my battery?. A: This BMS suit your battery or not depends on below 2 points Applicable battery models: 3.2V Lifepo4 Battery.
JIKONG JK-B1A8S20P Smart BMS 4-8S 200A Li-Ion LiFePo4 Battery 1A Active Balance
It has the protections for overcharging/overdischarging/overcurrent and short circuit, etc.3. BT communication function, battery status can be displayed on APP.6. Specification：Over Current Protection (adjustable): 10A-200A.
4S 16.8v Balance Board 4.2v Li-ion Lithium Standalone BMS Add-on
Example Uses: 1. This balance module can be used in parallel with a BMS to boost the balance efficiency of battery/BMS setup. 2. Secondly, the balance module can be used without a BMS, and will keep the individual battery cells within healthy balance levels. 3. Lastly, this balance module can be used in place of a traditional BMS. In specific setups where a battery is connected stable voltage source such as a 16.8v charger or solar charge controller (16.8v) and the output is controlled by a low voltage cutoff such as a inverter. We offer professional design consultation and services. Please let us know about your project!Purchase price of item will be credited a full 100% towards consultation information and services. Billed @$65 per hour, in 15min increments. Description: This standalone balance equalization board is used for a 4S lithium battery pack without a balance feature. This standalone module does not charge or act as a low voltage/over charge cutoff. This board uses a resistor to balance each cell to 4.15v/4.2v. This board can also be added to an existing BMS battery setup to boost the effectiveness of the balancing function by increasing maximum balancing capacity. Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion) Battery voltage range: 12v - 16.8v Maximum balance current: 66mA Board Size: approx. 37.3*25.8*2.4mm Package includes: 1 x 4S Lithium Battery Balance Board Wiring Instructions: B- is connected to the negative terminal of the battery 1(-) B1 connects between battery 1(+) and battery 2(-) B2 connects between battery 2(+) and battery 3(-) B3 connects between battery 3(+) and battery 4(-) B4 is connected to the positive terminal of battery 4(+) Shipping Note: Single boards may be shipped via USPS First Class Large Letter locally from the Cleveland area, a tracking number may not be available. Orders of two (2) or more will be shipped as a First Class Package including a tracking number.
JK Smart BMS 8-24S 200A Lifepo4 Li-Ion Battery w/2A Active Balance RS485 LCD Lot
This is an active BMS, it supports 13S-24S Li-ion and 15S-24S LiFePo4. 1 JK smart bms (Built-in Bluetooth). It also has active equalization current 2A. Active equalization current: 2A. It has the protections of overcharging/overdischarging/overcurrent and short circuit, etc.
Plug and Play 3S 60A 100A 12v – 12.6v Li-ion BMS Battery Balance No Soldering
Note: This BMS is a custom model that comes pre-assembled for easy install (no soldering needed) and is for Lithium-ion (Li-ion)/Lithium-polymer (LiPo), 3.7v/4.2v cells. Description:This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre-installed a screw-based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 100A (burst). The following is the BMS Easy Connection Kit parts list:(1) BMS Board for Lithium-ion (Li-ion)/Lithium-polymer (LiPo)(1) Pre-installed balance wire connection block, 18-24AWG Wire Compatibility (4) Ring Terminal Connectors M3, 8-16AWG for Dual Wire Compatibility (2) Ring Terminal Screws and Nuts *Wires are not included. Balance wires of 18-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. You can use a dual wire setup at the main connection points of (B-) and (C-) for heavy duty power draw. 3S 12v (12.6v) Lithium BMS Board BMS Operation Type Common Port (Charge/Discharge) BMS Cell Voltage Type 3S (3.7v/4.2v), 12v – 12.6v Discharge Continuous Amps (Max) Up to 60A, 750W Discharge Surge Amps (Max) Up to 100A, 1250W Discharge Voltage Limit Cutoff 2.7v per Cell, Smart Sense™ Cell 5% Reset Discharge Protection Cutoff Connect Charge or Short B- to P- Charge Voltage 12.6v (Max) Charge Amps (Max) Up to 60A, 750W Charge Voltage Limit Cutoff 4.2v per Cell, Smart Sense™ Cell 99% Balancing Voltage 4.15 per Cell Balancing Amps 60mA per Series Temperature Cutoff Protection Use NTC Probe Connection 85*C Short Circuit Yes, Protection Active Board Size 60mm*42mm Battery compatibility: Voltage of 2.7V (Empty) - 4.2V (Full Charge) Li-ion battery typesCharging input voltage: 12.6VMaximum starting current: 100A (Max)Discharge continuous current: 60A (Max)Charge current: 60A (Max)Board Size: approx. 42*60*7.4mmPackage includes: 1 x BMS Board Li-ion, 1 x Easy Connection Kit, 1 x Wiring Connection Guide Condition is New. Shipped with USPS First Class.
Plug and Play 4S 120A 12v 14.6v LiFePO4 BMS Battery Balance 12.8v
Note: This BMS is a custom model that comes pre assembled for easy install (no soldering needed) and is for LiFePO4, LiFe, or LFP batteries. Lithium-ion (Li-ion)/Lithium-polymer (LiPo) based BMS boards are in my other listings. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. We have pre installed a screw based connection block for the easy connection of balance wires to the BMS. The BMS is assembled to use a COMMON Port setup for both charge and discharge at 60A (continuous) and discharge at 120A (burst). The following is the BMS parts list: (1) BMS Board LiFePO4 LiFe LFP(2) Ring Terminal Connectors M3, 8-16AWG Wire Compatibility (2) Ring Terminal Screws and Washers(1) Pre-installed balance wire connection block, 16-24AWG Wire Compatibility *Wires are not included. Balance wires of 16-24AWG will fit in the balance connection terminal and primary wires of 8-16AWG can be used in the ring connectors. Larger gauge primary wires can be used with larger ring connectors or solder points. Battery compatibility: Voltage of 2.4V - 3.7V LiFePO4 battery typesCharging input voltage: 12V - 14.6VMaximum starting current: 120AMaximum continuous current: 60ACharge current: 60AMaximum continuous current (additional solder point): 100ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x LiFePO4 Battery Protection Board Condition is New. Shipped with USPS First Class.
Daly BMS 4S 12V/8S 24V/16S 48V 100A-250A LiFePo4 Smart BMS &Bluetooth Module lot
Daly BMS Bluetooth/Wifi Module/RS485/UART/LCD/Active Balancer/ParallelModule lot. JK Smart BMS 4S-24S 40A-300A LiFePo4 Li-ion with Active Balance BT/RS485/LCD Lot. Daly BMS 3S-16S 12V-48V 10A-60A Li-ion LiFePo4 Battery ProtectionBoard w/Balance.