The antenna is constructed with Poly Weave Nylon coated multi strand antenna wire. With over three decades of hands-on experience, we design, engineer, and build every antenna at our dedicated factory in the heart of Birmingham.
SIGMA 30m Mono Band Dipole Complete And Ready To Use. The antenna is constructed with Poly Weave Nylon coated multi strand antenna wire. With over three decades of hands-on experience, we design, engineer, and build every antenna at our dedicated factory in the heart of Birmingham.
The Radiowavz 10DBZ 10M Double Bazooka Mono Band Antenna is a high-quality, 17ft long antenna designed for HF frequency bands.
The radio appears to be complete and unmodified, with a clean interior and well-preserved beige cabinet. An excellent collector's piece or candidate for restoration/display. ✅Original handset cradle/base is present.
EFHW-8010-1KW-ICAS Multi-Band End Fed Half-Wave AntennaThe EFHW-8010-1KW-ICAS is a premium End-Fed Half-Wave (EFHW) antenna designed for seamless multi-band operation across the 80/40/30/20/17/15/12/10m bands. Unlike many end-fed antennas on the market, this model requires no antenna tuner, thanks to its resonance on 80m (3.5 MHz) and its harmonics (2nd, 3rd, 4th, etc.).Features and Advantages No Tuner Required: Fully resonant across multiple bands. High-Efficiency Transformer:Designed with two FT-240 (2.4inch dia.) stacked cores for minimal insertion loss.Transformation ratio of ~56:1 (~2800:50 Ohms).Optimized for 3.5–30 MHz with an unmatched average loss of less than 0.6 dB—a benchmark in the market for RF transformers.Worldwide leader in high-ratio, wide-bandwidth transformer design by E73M. Flexible Installations:Can be deployed in configurations such as horizontal, vertical, inverted V, or inverted L. Stealth Design:Constructed with durable, black #18 AWG wire for a low-visibility, weather-resistant installation.Equipped with stainless steel hardware for longevity.Technical SpecificationsFrequency Range: 3.5–30 MHz.Resonant Bands: 80/40/30/20/17/15/12/10m.Power Handling:1 kW I.C.A.S. for voice modes.250W for digital modes such as FT8.Wire Length: ~130 feet.Connector: Silver/Teflon SO-239.Transformer: MEF-330-1KW-ICAS, optimized for 3–30 MHz.Grounding RecommendationsGrounding the coaxial cable at the home’s entry point is highly recommended to protect equipment from electrostatic buildup and prevent electrostatic discharge (ESD).If the transformer box is mounted high above the ground, grounding at the box is unnecessary—ground the coaxial cable instead.Note: Grounding does not affect antenna tuning.SWR PerformanceTypical SWR readings are better than 2:1 when mounted 25–30 feet above ground and fed with 50 feet of RG8X coaxial cable.Perfect for Emergency and Professional UseThis antenna is ideal for ALE HF-Link, NVIS, MARS, ARES, EMCOMM, and similar applications. It’s suitable for both temporary and permanent installations, ensuring reliable communication in critical scenarios.
The Wave Indoor TV Antenna is a brand new sealed digital HDTV antenna that provides clear and crisp signal reception for 4K Ultra HD and Full HD TVs. With a maximum range of 120 miles and compatibility with various brands, this VHF antenna is designed to enhance your viewing experience. Made of durable plastic and compact in size at 7 inches, this antenna is suitable for indoor use and comes with a 1-year manufacturer warranty for added peace of mind. Wave Antenna is a reliable choice for improving your TV signal reception and enjoying high-definition programming.
EFHW-7510-2K-PLUS Multi-Band End Fed Half Wave Antenna- NO TUNER NEEDED!EFHW-7510-2K-Plus, 2000W Multi-Band End Fed Half Wave AntennaImproved version of the EFHW-7510-2K, now with three large cores, 2.9-inch diameter, featuring just 0.5 dB Insertion loss 3-30MHz!This is an End-Fed Half-Wave (EFHW*) antenna for 75/40/30/20/17/15/12 and 10m bands. Unlike many END FED antennas on the market, this one does not require the Antenna Tuner to operate. Due to the High Impedance feed point, the antenna is less height dependent. You can put it up at 10 or 50 feet in the air without much change in VSWR values.*This is perfect antenna for ALE HF-link stations, NVIS, MARS, ARES, EMCOMM etc.Various installations such as horizontal, vertical, inverted V, inverted L, etc. are possible. Your VSWR values could vary with different wire configurations and the height of installation.NO TUNER needed!NO counterpoise needed! (Grounding recommended*)Frequency coverage: 3.5-30MHzResonant on 75/40/30/20/17/15/12/10mWire length ~130 feetPower Handling: 2kW I.C.A.S350W digital modes continuous (FT8, RTTY, etc)Stainless Steel hardwareStealth #14 AWG XLPE black wireConnector: Silver/Teflon SO-239The 2K-Plus model has three large stacked cores *Grounding at the transformer box or end of the coaxial cable is recommended for protection of your equipment from an electrostatic buildup in order to prevent ESD- electrostatic discharge.NOTE: grounding does not affect antenna tuning. If the transformer box is installed high above the ground , there is no need to route the ground wire from the box, instead just ground the coaxial cable at the entrance to your home or at the station.---------------------------------------------------------------------------------------------No guarantee or liability is either expressed or implied pertaining to damages to persons, buildings, or equipment in the installation or use of our antennas. You must use extreme caution when working around power lines. If the antenna were to come into contact with a voltage carrying line it could be fatal.
One onBundle set of brand new 3 FT 6 FT and 9 FT length RG-8x high power coax patch cables with HAND SOLDERED silver body PL-259 (UHF male) connectors on each end. 50ohm Shielded high quality coax cable with male to male PL-259 connectors! Absolutely great 100% copper RG-8x low loss coax cable for all your DX needs!! FAST USPS PRIORITY MAIL 2-3 SHIPPING to all 50 states!!!! Ships immediately upon payment with tracking!! YES YOU READ THAT CORRECT 2-3 day PRIORITY SHIPPING!!! SPECIFICATIONS: Gray Non-Contaminating Ultra-Violet Resistant PVC JacketPremium 95% Bare Copper Braid Solid Polyethylene Dielectric InsulatorStranded Bare Copper Center Conductor HAND SOLDERED silver body PL-259 Premium Grade Silver Body PL-259 Connectors on each end 50 Ohm Nominal Impedance
Amateur / Ham Radio LED Illuminated Call SignMade with a solid color LED Looks Great in your Shack!! Laser Engraved with Your Call Sign and Message Custom LED edge lit acrylic plaque Plaque is 8.5” wide x 5” tall Base is 8.5” wide by 2.5” deep You may customize wording Most all fonts in MS Word available Times New Roman is font used in pictures and is default This item comes with a 110V power module that plugs in the wall. This item is also listed with just a 12V power lead for your own supply for $5 less Black high gloss acrylic base with sandwiched clear layer Non-skid rubber feet on base Sign is edge lit by LEDs in base LED colors of Red, Blue, Yellow, Purple, Green, Orange and White available These look much better than the picture shows and are visible during normal lighting conditions Upon purchase and payment, please indicate: 1. Call Sign 2. Wording if different than in picture with your Call Sign 3. Font desired if different than Times New Roman 4. LED Color (Blue will be default but I will confirm by Ebay message if you do not define) Processing will be within one business day after all necessary information is received.