University T-30 Driver Unit 8 Ohms Speaker With Horn - Tested, Works. See pictures for condition, signs of use, and wear. Sold as is. May have musky smell. Speaker tested by connecting to an amp playing music.
For best description, see photos. This is the exact item Open box comes with speaker No paperwork or manual
INCLUDES: 2x TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Drivers Description TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver For a high output compression driver to be used for the critical mid range high (vocals), choose Timpano’s D3200TI-ND titanium compression driver. A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds. Recommended High Pass Filter – 1600 Hz at 12dB / Octave Crossover Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible. When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range. The high energy motor is also response for output up to 110 dB with only one watt of input power. Designed and Engineered by PRV Audio Group. Replacement Diaphragm are available at TPT-RPD3200TI-ND Timpano Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use. Technical Details GENERAL SPECIFICATIONS Neodymium Titanium Driver 200 Watts Continuous Power 100 Watts RMS Power Impedance: 8 Ohms Sensitivity: 110 dB Frequency Response: 1600Hz – 19000Hz 2″ Exit Throat Diameter 3″ Voice Coil Titanium Diaphragm Weight: 3.92 Lbs (1.78 Kg)
TPT-DH175 SLIM 1″ Exit Phenolic Diaphragm Driver + Plastic Slim Horn INCLUDES: 2 TPT-DH175 SLIM 1″ Exit Phenolic Diaphragm Driver + Plastic Slim Horn General Description: The Timpano TPT-DH175 SLIM is a 1″ phenolic dome compression driver specially designed to offer a smooth extended frequency response over a broadband, from mids to highs, with very high efficiency. Ideal for compact two- and three way systems. The 4.5″ x 4.5″ horn produces a controlled 60° x 60° dispersion pattern to reduce unwanted reflections while still delivering room filling sound. With a common footprint, this is an excellent tweeter for use as a replacement. | SLIM DESIGN | High Frequency Driver + 4×4″ Slim Horn Mounting Depth: 3.60″ (91.5 mm) Mounting Cutout Diameter: 3.38″ (86 mm) + Terminal Overall size: 4.50″ Wide x 4.50″ Length x 4.17″ Height Technical Details GENERAL SPECIFICATIONS High Frequency Driver + 4×4″ Slim Horn 150 Watts Continuous Power 75 Watts RMS Power Impedance: 8 Ohms Sensitivity: 108 dB Frequency Response: 1.3 KHz – 19 KHz 1″ Voice Coil Phenolic Diaphragm Ferrite Driver Mounting Depth: 3.60″ (91.5 mm) Weight: 1.15 Lbs
Elysian Audio Model 2 – 6-Piece Smart 7.1 Surround Sound System, 2600W, Wireless, Bluetooth, Home Theater
Pair of speakers. One is brand new, in box. One is open box in excellent condition with all materials. No warranty.
The beauty of OSD Audio in-wall subs is that you'll experience that thunderous, room-filling bass without filling up floor space. An excellent in-wall subwoofer at an excellent price, the OSD-IWS10 is a 10-inch passive subwoofer with power handling up to 200 Watts. Installation is easy with our "easy in" mounting bracket that mounts to the sheet-rock after the cut-out hole has been made. The grille is also paintable to match your room decor and we include a cutout template that doubles as a paint shield. Speaker Type: 10" In-Wall SubwooferWoofer: 10" Polypropylene with Rubber SurroundFrequency Response: 38Hz - 200Hz +/-3dBPower Handling: 200 WattsSensitivity: 2.83V/1m: 86 dBImpedance: 8 OhmsInputs: Spring Binding Posts"Easy In" Mounting Bracket for Easy Installation IncludedPaintable Grille & Frame IncludedIntegrated Rear Dust ShieldSold As: SingleMounting Depth (Assuming .5" Drywall): 3.75"Unit Dimensions: (L x H x D) 12" x 12" x 3.75"Cutout Dimensions: (L x H) 10.62" x 10.62"Weight: 11 lbs
INCLUDES: 4X 10MR650A 10" MIDRANGE LOUDSPEAKER FEATURES:PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. Meet the new improved version from 10W650ANew basket design implemented, reducing its size from 4.33″ to 3.90″ of mounting depthImprovement on output throughout + 1dB on the low frequency frequency responseGain on the vocal response from 350 Hz to 4000 HzIncreased on voice coil winding has improved power handle and raised its Xmax to 5.72 mmThe purpose to built this midrange was to increase vocal response where the 10W650A lack output without losing any midbass.All new features on the 10MR650A make it capable of high output and low distortion, this mid range is perfect for filling in the important midrange response in any high output sound system. Great Addition to the ALTO Series!Highlights2.5″ layer CCAW voice coil wound on a glass fiber former, 8 ohmsVented pole piece dissipates excess heat to minimize power compression650 watts RMS program power ratingCovers the majority of the vocal range allow easy system integration with a tweeterThe new 10MR650A from ALTOSerieshas everything you want in a midrange pro audio loudspeaker, without sacrificing performance we have designed a compact and versatile footprint with only 3.90” of mounting depth.This Midrange works great as a door speaker in car audio applications or as low frequency driver for a two-way satellite speaker concept. GENERAL SPECIFICATIONSNominal Diameter10″ (254 mm)Nominal impedance8 OhmNominal Power Handling325 WattsContinuous Program Power (RMS)650 WattsMax Peak Power1300 WattsSensitivity 2.83V at 1m97.5 dBRecommended Hi Pass Crossover** **For Full Power Handling150 Hz** **12db Per Octave CrossoverFrequency Response at -10DB80 – 6,500 HzVoice Coil Diameter2.5″ (68 mm)Voice Coil WireCCAWVoice Coil Winding Depth16.2 mmFormer MaterialPolyimideMagnetic Gap Depth9.5 mmFrame MaterialStamped Steel EXTRA INFOOverall Diameter10.10”(256.5 mm)Front Mount Baffle Cutout9.20” (233.5 mm)Mounting Depth3.90”(99 mm)Overall Depth4.23”(107.5 mm)Net Weight10.4 Lbs (4.7 kg)Shipping Weight12.8 Lbs (5.8 kg)Carton Dimensions W x L x H12.9”x 12.9” x 6.9” (328 x 328 x 175mm)
INCLUDES: 1X 10MR650A 10" MID RANGE LOUDSPEAKER FEATURES: Coming soon, the brand new ALTO Series 10″ Mid Range Loudspeaker. Highlights: Nominal Impedance: 8 Ohms Rated AES Power Handling (RMS): 325 Watts Program Power: 650 Watts Voice Coil Diameter: 2.5″ Technical Details GENERAL SPECIFICATIONS Nominal Diameter 10″ (254 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 325 Watts Program Power 650 Watts Sensitivity 2.83V at 1m 97.5 dB Recommended Hi Pass Crossover** **For Full Power Handling 150 Hz** **12db Per Octave Crossover Frequency Response at -10DB 80 – 6,500 Hz Voice Coil Diameter 2.5″ (68 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 16.2 mm Former Material Polyimide Magnetic Gap Depth 9.5 mm Frame Material Stamped Steel Equivalent Volume Vas 41.9 l Excursion (mathematical)*** Xmax 5.72 mm Free Air Resonance Fs 64.7 Hz Mechanical Factor Qms 14.19 Electrical Factor Qes 0.48 Total Factor Qts 0.47 Cone Area Sd 398 cm² Mechanical Mass Mms 31.86 g Bl Factor Bl 12.25 Tm Dc Resistance Re 5.6 Ohms Inductance Le 0.44 mH at 1 kHz Mechanical Mass Without Air Mmd 27.37 g Mechanical Compliance Cms 0.190 mm/N EXTRA INFO Overall Diameter 10.10”(256.5 mm) Front Mount Baffle Cutout 9.20” (233.5 mm) Mounting Depth 3.90”(99 mm) Overall Depth 4.23”(107.5 mm) Net Weight 10.4 Lbs (4.7 kg) Shipping Weight 12.8 Lbs (5.8 kg) Carton Dimensions W x L x H 12.9”x 12.9” x 6.9” (328 x 328 x 175mm)