LARSEN NMO-150 Mono Band Mobile Antenna 44″ Whip
This item came from a cb shop that closed down. Please see all photos for the exact condition. Thank you!
PROCOMM PCF6B 6m MONO BAND HAM VERTICAL MOBILE ANTENNA HAMSTICK STYLE 500W
ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx or USPS mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.
PROCOMM PCF20B 20m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W
The monoband antenna is available for 6m-75/80m ham bands. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft(48in for 75/80m and 36in for 6m model) plus the whip length specified in table below.
Radiowavz 10DBZ 10M Double Bazooka Mono Band Antenna, 1500W SSB 200W CW, 17ft
The Radiowavz 10DBZ 10M Double Bazooka Mono Band Antenna is a high-quality, 17ft long antenna designed for HF frequency bands.
PROCOMM PCF40B 40m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W
ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx Home or USPS Priority mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.
PROCOMM PCF10B 10m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W
The monoband antenna is available for 6m-75/80m ham bands. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below.
PROCOMM PCF75B 75m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W
ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx Home or USPS Priority mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.
Xiegu VG4 7.5M 4-Band Base Station Vertical Antenna | for HF Transceiver
HOME PAYMENT SHIPPING GUARANTEE&WARRANTY ABOUT US CONTACT US ADD TO MY FAVOURITES Two-Way Radio Baofeng Radioddity Wouxun TYT Leixen Accessories Android Tablet & Accessories 7 Tablet 9 Tablet 10.1 Tablet 3G Phablet Tablet Accessories Graphic tablet Huion UGEE Amplifier Lepai Amplifier Car Amplifier Topping Amplifier Aker Speaker FM Transmitter Speaker Toys & Games Wireless AV Transmitter 1 to 1 1 to 2 1 to 3 VR BOX Stock clearance Your Satisfaction Is Our Destination Xiegu VG4 7.5M 4-Band Base Station Vertical Antenna | for HF Transceiver Description Xiegu VG4 antenna is a 4-band GP type and is made of aluminum alloy with anti-oxidation surface. It is light, solid, and easy to install. It is with good outdoor weather ability. After the normal installation without needing extra guying, it can resist Category One Hurricane.Features: 4-Band Vertical Antenna: The VG4 is a 4-band Ground Plane type antenna made of aluminum alloy with an anti-oxidation coating. It covers 40/20/15/10 meters. The user trims the antenna to the part of the band as needed. Automatic band switching: The antenna has a single coax cable feed however each band is individually tuned with a low VSWR across the band. Through fine-tuning, the best (rock-bottom) SWR can be achieved on the user’s choice of frequency within the band. The band selection is 100% automatic through the single feed, just switch bands on the radio. No extra ground peg or radials are needed: The antenna has its own effective counterpoise replacing the need for radial wires. Physical: This antenna is light, but built to last and is easy to install. Suitable even for homes with only a small space available. It is perfect for roof, patio, small backyard, condo and motorhome installation. Top loading: Parallel resonators are used to give the best vertical-element efficiency. End loading of the lower HF band sections (capacitive hats) allow efficient operation with a reduced antenna height. Outdoor weather ability: The VG4 is rated for high wind environments. After a normal installation, it can resist a category one hurricane with no guying required. Specifications: Use frequency band: 7/14/21/28MHz (40m/20m/15m/10m) Axial length: about 7.8m | 25.6ft Radial length: about 2.7m | 8.8ft Maximum power handling: 1000W PEP (CW500W, RTTY300W) Antenna impedance: 50Ω VSWR：＜1.5:1 Antenna bandwidth: 40m: 150kHz / 20m: 450kHz / 15m: 800kHz / 10m: 1000kHz Rated wind speed: 35 m/s Antenna interface type: SL16-K Weight: about 7.0kg | 15.4lb Package size: 13x13x120cm | 0.4x0.4x3.9ft Erection height: the distance from the ground is more than 3m (10ft) Installation Instruction: A. Match and plug in the components in order. B. Secure the components with screws and spanners. C. Twist the capacitor cap/ the main counterpoises into the corresponding position. D. Fix the main pole with a U-shaped holding clamp and a fixing plate. E. Install the matching box.Note:1. The antenna can be installed either on a stable ground supported mast or using a wall mount secured using expansion bolts. The installation clearance above the ground should be greater than 3 meters (10ft). 2. The antenna installation environment shall be as open as possible and away from some important equipment & facilities, power transmission & transformation equipment, medical equipment and other sensitive electronic instruments or equipment, and public radio & television tower or other high-power radio transmission antenna system. 3. When mounting on a tall mast or roof please take appropriate measures for lightning protection and grounding. 4. After the antenna test is completed, it is recommended to apply waterproof and UV resistant silicone rubber at the antenna feeder joint, to wrap the whole connection part. 5. As long as the surrounding environment is safe, it is not required to use any guy ropes. 6. In extreme weather conditions, it is recommended to take down the antenna in advance of the storm arriving if possible.PS: The VG4 antenna can be adjusted to any band center frequency that you wish. During the configuration step, adjustment of the higher frequency bands will aect all of the lower frequency band settings. The adjustment of lower frequency bands will not however aect the higher frequency band settings. Therefore, the adjustment sequence is, as shown above, to adjust from the 10m band to the 40m band. Generally speaking, only the 40m frequency band will need adjustment. What's in the box?1 x Main support (450*46*4mm | 1.5*0.15*0.01ft) 6 x Main counterpoise (1200mm | 3.9ft) 1 x Antenna body NO:1 (1200*33*3mm | 3.9*0.1*0.01ft) 1 x Antenna body NO:2 (1200*29.5*26mm | 3.9*0.1*0.08ft) 1 x Antenna body NO:3 (1200*26*23mm | 3.9*0.08*0.1ft) 1 x Antenna body NO:4 (10m Notch filter) 1 x Antenna body NO:5 (245*26*23mm | 0.8*0.08*0.07ft) 1 x Antenna body NO:6 (10m Notch filter) 1 x Antenna body NO:7 (325*26*23mm | 1*0.08*0.07ft) 1 x Antenna body NO:8 (20m Notch filter) 1 x Antenna body NO:9 (1200*12.8*10.5mm | 3.9*0.04*0.03ft) 1 x Antenna body NO:10 (1200*10*8m | 3.9* 0.03*0.03ft) 2 x 20m capacitor cap (500mm | 1.6ft) 4 x 40m capacitor cap (1200mm | 3.9ft) 1 x Matching box 1 x Main support set plate 4 x U clamp 1 x 7# sleeve 1 x 10# wrench 1 x 13# wrench 1 x M4 Allen wrench Polices Shipping Payment Return Guarantee Custom Duty Item will be shipped within3 working day after full payment is received. Tracking No. will be sent to all customers upon package shipment.For Domestic shipping, our Shipping Method refers to Standard Shipping(3-5) business days(weekends excluded). Please check the 'Estimated Delivery' to know item delivery time. Delivery time depends on destination, logistics mode and other factors. If you have not received your shipment within 30 days, please contact us. We will track the shipment and get back to you as soon as possible. Customer's satisfaction is our goal.Just kindly reminding that according to eBay policy, we will not cover the Customs duty and VAT fee. (No such issues for USA) We accept payment via PAYPAL ONLY which provides full-scale buyer protection policy up to $500. We only ship to confirmed PAYPAL addresses. Please make sure payment address in PayPal is correct. All major credit cards are accepted through our secure payment processor PayPal. Payment must be received within 7 business days of auction closing. 30 day money back return policy. If you are not satisfied when you receive your item, please return it within 30 days for a replacement or money back. Please contact us for return address before you send it back. If item defective in 3 monthswe will send you a replacement without extra charge, or offer refund upon faulty received. after 3 monthsyou are still welcomed to send it back to us for exchang Buyer may responsible for all return shipping costs. In case you receive wrong products due to shipping error, please contact us for exchange or refund. If its damaged, please refuse to accept and contact us as soon as possible. 12 months Manufacturers Warranty. We guarantee 100% customer satisfaction. If your item is not as described or faulty when you receive it we will replace it for you with no additional charge. Please note that DUTY RATE is different from each country. You can check it exactly from local Customs Department. According to Ebay Policy, it is buyers responsibility for the duty once it produces. We do fully understand your concerns about the tariff during cross-border transaction. No problem we are happy to declare the package as lower value for you, which is the most we can do for you. Thank you for your understanding. If you have the following issues, please click to get your problems solved: 1. Item Not Received 2. Item Not As Description 3. I Need to Retum My ltem 4. Pre-sale Inquiry 5. Others
HF End Fed antenna EFHW-8010-1kW-ICAS 130ft long
EFHW-8010-1KW-ICAS Multi-Band End Fed Half-Wave AntennaThe EFHW-8010-1KW-ICAS is a premium End-Fed Half-Wave (EFHW) antenna designed for seamless multi-band operation across the 80/40/30/20/17/15/12/10m bands. Unlike many end-fed antennas on the market, this model requires no antenna tuner, thanks to its resonance on 80m (3.5 MHz) and its harmonics (2nd, 3rd, 4th, etc.).Features and Advantages No Tuner Required: Fully resonant across multiple bands. High-Efficiency Transformer:Designed with two FT-240 (2.4inch dia.) stacked cores for minimal insertion loss.Transformation ratio of ~56:1 (~2800:50 Ohms).Optimized for 3.5–30 MHz with an unmatched average loss of less than 0.6 dB—a benchmark in the market for RF transformers.Worldwide leader in high-ratio, wide-bandwidth transformer design by E73M. Flexible Installations:Can be deployed in configurations such as horizontal, vertical, inverted V, or inverted L. Stealth Design:Constructed with durable, black #18 AWG wire for a low-visibility, weather-resistant installation.Equipped with stainless steel hardware for longevity.Technical SpecificationsFrequency Range: 3.5–30 MHz.Resonant Bands: 80/40/30/20/17/15/12/10m.Power Handling:1 kW I.C.A.S. for voice modes.250W for digital modes such as FT8.Wire Length: ~130 feet.Connector: Silver/Teflon SO-239.Transformer: MEF-330-1KW-ICAS, optimized for 3–30 MHz.Grounding RecommendationsGrounding the coaxial cable at the home’s entry point is highly recommended to protect equipment from electrostatic buildup and prevent electrostatic discharge (ESD).If the transformer box is mounted high above the ground, grounding at the box is unnecessary—ground the coaxial cable instead.Note: Grounding does not affect antenna tuning.SWR PerformanceTypical SWR readings are better than 2:1 when mounted 25–30 feet above ground and fed with 50 feet of RG8X coaxial cable.Perfect for Emergency and Professional UseThis antenna is ideal for ALE HF-Link, NVIS, MARS, ARES, EMCOMM, and similar applications. It’s suitable for both temporary and permanent installations, ensuring reliable communication in critical scenarios.