www.p65warning.ca.gov – Page 2

VANCO CBH2BP 2PIN DC CIGARETTE LIGHTER POWER CABLE CORD FOR ROYCE ROBYN WARDS CB

By |2026-07-23T15:38:17+00:00July 23rd, 2026|

ONE NEW old stock Vanco CBH2BP 2 pin 20-Ga DC power cord with cigarette lighter plug. 5Ft in with 2 Amp inline fuse. Replacement power cable for Robyn TR123C and XL-One, and other select models of Royce and Wards CB Radios with power jack as pictured. The power plug measures 0.5" (W) x 0.28" (T) with power pins spaced 0.25" center to center. Keyed for polarity as shown. Verify dimensions and polarity of radio power before purchase. This cable is NOT compatible with 2-pin Midland CB radios as the polarity is reversed. Visit our eBay store for other radio accessories.

PROCOMM PCF6B 6m MONO BAND HAM VERTICAL MOBILE ANTENNA HAMSTICK STYLE 500W

By |2026-07-23T04:47:45+00:00July 23rd, 2026|

ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx or USPS mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.

PROCOMM PCF20B 20m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W

By |2026-07-23T04:47:45+00:00July 23rd, 2026|

The monoband antenna is available for 6m-75/80m ham bands. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft(48in for 75/80m and 36in for 6m model) plus the whip length specified in table below.

PROCOMM PCF10B 10m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W

By |2026-07-23T04:47:44+00:00July 23rd, 2026|

The monoband antenna is available for 6m-75/80m ham bands. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below.

PROCOMM PCF40B 40m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W

By |2026-07-23T04:47:44+00:00July 23rd, 2026|

ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx Home or USPS Priority mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.

PROCOMM PCF75B 75m MONO BAND HAM VERTICAL MOBILE HF ANTENNA HAMSTICK STYLE 500W

By |2026-07-23T04:47:43+00:00July 23rd, 2026|

ONE NEW Procomm PCFxxB two piece monoband mobile antenna (xx signifies the ham band of operation). The monoband antenna is available for 6m-75/80m ham bands. Its two piece construction consists of a 44 in long x 1/2in diameter (48in for 75/80m and 36in for 6m model) fiberglass tuned bottom loading coil with black PVS wrapping and a 36in long (48in for 75/80m and 16in for 6m model) stainless steel top telescopic adjustable whip. The base end has a 3/8 x 24 thread fitting compatible with mot antenna mounts (mount not included). Resonant frequency is adjustable with the top telescopic whip. SPECIFICATIONS:Unity gain (0dBd). Estimated antenna height of 44 in fiberglass shaft (48in for 75/80m and 36in for 6m model) plus the whip length specified in table below. Estimated bandwidth varies from 1MHz (on 6m) to 40KHz (on 75/80m). Rated transmit power 500W PEP. Convert to a base or portable antenna using the base radial kit ASTGPK (listing # 151342343685). BAND FREQUENCY (MHz) Bandwidth(KHz) Whip(In) Whip Length Magnetic Mt(in) Whip Length Mirror Mt(in)80m 3.0-3.5 40 48 46 44.575m 3.5-4.0 40 48 46 44.560m 5.332-5.405 50 36 32 30.540m 7.0-7.3 75 36 28 2830m 10.1-10.15 100 36 32.5 29.7520m 14.0-14.35 150 36 29 2617m 18.068-18.168 175 36 30 26.515m 21.0-21.45 210 36 31.5 28.512m 24.79-27.87 300 36 30.25 2810m 27.7-29.9 550 36 31 26.256m 50-54 1000 16 11.5 9This item ships UPS Ground, FedEx Home or USPS Priority mail within the Continental US depending on location at our discretion. This item is not available for shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.

JETSTREAM JTM6 5.5in MAGNETIC MAGNET 3/8-24 ANTENNA MOUNT & COAX CABLE

By |2026-07-22T22:30:02+00:00July 22nd, 2026|

New 5.5in diameter magnetic antenna mount with 16.5Ft of RG-58/U coax cable and molded PL-259 connector. Accepts 3/8"-24 threaded antennas. This item ships USPS Ground, UPS or FedEx mail within the Continental US depending on location at our discretion. This item is not available for direct shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.

VANCO CBM35SB DYNAMIC POWER MICROPHONE 5PIN CONNECTOR FOR COBRA UNIDEN

By |2026-07-23T15:38:19+00:00July 22nd, 2026|

NEW old stock Vanco CBM35SB dynamic power microphone. 5 Pin connector fits Cobra, Uniden radios. Power microphone to boost audio. Adjustable gain. 4Ft coiled microphone cable. Black color. Requires 1.5VDC AA Battery (not included) Compatible with Cobra 90LTD, 140GTL, 142GTL, 148GTL (early version), 2000GTL, 2010GTL, and others; Uniden Grant, Washington, McKinley, Madison model of radios; and select models of Galaxy and Midland radios. (NOTE: NOT compatible with Uniden President HR2510, HR2600 and other radios with UP/DWN channel control on mic). Please contact us if you have questions regarding compatibility with your radio. Wiring: Pin 1 - AudioPin 2 - Shield (Ground)Pin 3 - RXPin 4 - Common (Ground) for RX/TXPin 5 - TX / PTT Visit our eBay store for other radio accessories.

WORKMAN DM-507-5R 5 PIN DIN DYNAMIC REPLACEMENT CB HAND MICROPHONE FOR REALISTIC

By |2026-07-22T13:46:52+00:00July 22nd, 2026|

NEW Workman DM-507 dynamic microphone. Replacement mike wired for Realistic, Radio Shack CB radios with a 5 pin DIN microphone connector. Rugged construction with high quality housing and metal hanger. SPECIFICATIONS: Sensitivity: -70+/- 3dB (at 1KHz)Impedance: 500 ohmFrequency Response: 300~6KHzWIRING:Pin 1 - GroundPin 2 - N.C.Pin 3 - TXPin 4 - AudioPin 5 - RX Visit our eBay store for other radio accessories.

PROCOMM HS818T-NKT 3/8-24 STUD MOUNT 18Ft RG-58U COAX CABLE KIT & NIPPLE PL-259

By |2026-07-22T13:41:02+00:00July 22nd, 2026|

NEW Procomm HS818T-NKT 18Ft RG-58U weather proof terminator cable kit with brass 3/8-24 threaded stud and nipple mounted PL-259 connector. Cable terminates into FME female connector with FME-male to PL-259 adapter included. Nipple mounted connector allows for easy cable routing. Accommodates standard 3/8-24 threaded antennas. Includes cable and mount (antenna sold separately). Visit our eBay store for other radio accessories.