Choose Length 8-Pin Mini DIN to RCA Male Cable for YAESU FT-710 Audio Video Plug
Yaesu amplifier relay keying cable forthe FT-450, 991 (A), 950, 900, 840 ,857, 847 (HF), 817, 891, 897( D) and FTDX-1200 radios. Copper shielded cable.
RAM-202U RAM 2.5″ Round Base with AMPS Hole Pattern and 1.5″ Rubber Ball
The RAM Mounts RAM202U is a versatile mounting solution with a 2-1/2 inch diameter base and a rubber ball that provides a secure and stable hold for your GPS devices. Compatible with a wide range of brands, including Garmin, this mount is perfect for those who need flexibility and reliability in their vehicle electronics. Whether you're mounting your GPS on your car dashboard or on a boat, this RAM Mounts model is designed to withstand the rigors of daily use. Its high-quality construction ensures that your device stays in place, even on the bumpiest roads or roughest waters. Get the peace of mind you need with the RAM Mounts RAM202U.
Power Transformer Thordarson 24R105 60v CT 2.5Amps 2-6.3v 1.5amp New Old Stock
Power Transformer Thordarson 24R105 60v CT 2.5Amps 2-6.3v 1.5amp New Old Stock. This unit is in good condition, it does seem to have paint chipping off, but there is no rust! The wires are an excellent condition ! It doesn’t seem to ever have been used, looking at the wires, and never seemed that it was never attempted to be used If you have any further questions, please feel free to ask ! If you have any offers, please feel free to send them ! Thank you !
RAM Motorcycle Brake / Clutch Mount with Round 2.5″ Diameter AMPS Base
Features: ---Mounts to both brake/clutch reservoirs and rails * ---For rails from 0.50" to 1.25" in diameter - includes hardware to adjust for different sizes ---Standard size double socket arm - overall length: 3.69"; socket to socket: 3" ---Round 2.5" diameter base with AMPS hole pattern and 1" ball ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-B-174-202U ---Manufacturer's lifetime warranty ---Made in the USA * Note: The RAM-B-174U base can mount to either the brake/clutch reservoir or any round rail that is 0.5" to 1.25" in diameter. To see if the RAM-B-174U base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
RAM Double 2.25″ Ball Mount with 2.5″ Round AMPS Plate and 3.68″ Round Plate
Features: ---Standard size double socket arm - Overall Length: 8.375" - Socket-To-Socket Length: 6.5625" ---A single spring inside the arm opens the end of the sockets, allowing you to pivot the ball and socket connection. ---Round 3.68" diameter base with 2.25" diameter rubber ball - base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. ---Round 2.5" diameter base with AMPS hole pattern and 2.25" diameter rubber ball ---Overall length fully straight: 10.75" approx. ---Holds up to 6 lbs. ---RAM ball and socket technology with almost infinite adjustments for your perfect viewing angles ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-D-101-254U ---Manufacturer's lifetime warranty ---Made in the USA.
RAM Double U-Bolt Rail 2.25″ Ball Mount with 2.5″ Round AMPS Plate
Features: ---Two stainless steel u-bolts for extra hold - Fits rails from 1" to 1.25" in diameter ---Molded into the base is a 2.25" rubber ball - Includes black cover caps for exposed ends of u-bolts ---Short double socket arm - Overall Length: 5.1", Socket-To-Socket Length: 3.6" ---2.5" diameter round base with 2.25" diameter rubber ball - base has pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees ---Holds up to 6 lbs. ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-D-254-C-235U ---Manufacturer's Lifetime Warranty ---Made in the USA.
RAM 1″ Ball Short Mount with 2″ x 2.5″ Rectangular Base and 2.5″ Round AMPS Base
Features: ---2.25" x 2" plate with 1" ball, a four hole pattern - center to center hole pattern is 1.5" x 2" (hole diameter: 3/16") ---Plate thickness: 1/4" ---Double socket short arm - Overall Length: 2.38"; Socket-To-Socket Length: 2" ---Round 2.5" diameter base with 1" ball and pre-drilled holes, including the universal AMPS ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-B-101U-A-225U ---Manufacturer's lifetime warranty ---Made in the USA.
RAM Mounts Composite Base RAP-B-202U 1” Ball Size B 2.5″ Round Base AMPS 4 Hole
With B size 1" RAM® rubber ball allows for connection to any B size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability. Made of high-strength composite.
RAM Flat Surface Short Mount with 2.5″ Round Base and Square AMPS Adapter
Features: ---Round 2.5" diameter base plate with 1" ball - Plate has pre-drilled holes, including the universal AMPS hole pattern ---Short double socket arm - Overall length: 2.38" ---Square 2" x 1.7" base with four pre-drilled holes, one at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern ---Fits a variety of device cradles ---RAM ball and socket system with easy adjustment points for your optimum viewing position ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-B-139U-A ---Manufacturer's lifetime warranty ---Made in the USA.
RAM Flat Surface Mount with 2.5″ Round Base and Square AMPS Adapter
Features: ---Round 2.5" diameter base plate with 1" ball - Plate has pre-drilled holes, including the universal AMPS hole pattern ---Stanard size(medium) double socket arm - Overall length: 3.69" ---Square 2" x 1.7" base with four pre-drilled holes, one at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern ---Fits a variety of device cradles ---RAM ball and socket system with easy adjustment points for your optimum viewing position ---Overall mount height if fully extended: 5" ---Constructed of powder coated marine grade aluminum ---Genuine RAM Mount: Part # RAM-B-139U ---Manufacturer's lifetime warranty ---Made in the USA.