Class D MOSFET Monoblock Power Amplifier 1200 Watts 4 Ohms, Frequency Response: 8Hz - 250Hz. Its compact design features both RCA and high-level inputs. Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
In good condition see pictures for details
FeaturesSingle channel bass only car audio amplfier with bass boost stable to two ohms 1200 watts rmsSpecificationsLine: BassOperation Class: Classe DInput Sensitivity: 320mV - LEVEL 100%Signal Noise/Ratio: >90dBFrequency Response: 8Hz a 250Hz (-3dB)Number of Channels: 2Weight: 10 lbs- SKU: TNSR3298.
The BASS 1200 amplifier is a robust and efficient solution for those looking for excellence in sub-bass and bass frequencies. With 1200 W RMS and available in 1 Ohm, 2 Ohm or 4 Ohm versions, it has a frequency response of 8 Hz to 250 Hz, which makes it ideal for subwoofers. The audio inputs via RCA and WIRE (High Level) guarantee more versatility, allowing use with most players on the market, including original multimedia, without the need for adapters.Equipped with gain adjustment (0.2 to 4V), crossover with subsonic adjustment from 8 to 30Hz and LPF from 60 to 250Hz, and variable Bass Boost, it allows you to choose the central frequency between 35 and 60Hz and increase the bass by up to 10 dB.The aluminum frame, combined with the Smart Cooler, ensures efficient heat dissipation and silent operation.
The BASS 1200 amplifier is a robust and efficient solution for those looking for excellence in sub-bass and bass frequencies. With 1200 W RMS and available in 1 Ohm, 2 Ohm or 4 Ohm versions, it has a frequency response of 8 Hz to 250 Hz, which makes it ideal for subwoofers. The audio inputs via RCA and WIRE (High Level) guarantee more versatility, allowing use with most players on the market, including original multimedia, without the need for adapters.Equipped with gain adjustment (0.2 to 4V), crossover with subsonic adjustment from 8 to 30Hz and LPF from 60 to 250Hz, and variable Bass Boost, it allows you to choose the central frequency between 35 and 60Hz and increase the bass by up to 10 dB.The aluminum frame, combined with the Smart Cooler, ensures efficient heat dissipation and silent operation.
The BASS 15K has been expertly engineered with cutting-edge technology to deliver outstanding efficiency and performance for car audio systems, specifically targeting sub-bass and bass frequencies in the 8Hz to 250Hz range. With a peak power output of 15,000 Watts at 1 ohm on a single channel, this amplifier provides exceptional power and clarity. It includes customizable settings to match your vehicle's trunk size and the dominant frequency of your system, featuring BASS BOOST and an adjustable central frequency. Additionally, the BASS 15K offers advanced displacement control through its SUBSONIC FILTER, volume control, and LOW PASS filter, ensuring your bass is perfectly tuned. Welcome to the world of premium audio with Taramps! Powered by ExportYourStore.com
Description THE BIG BOSS 3 BASS is much more than an amplifier; brings together the best technology available in terms of audio and design. With 108 RGB LED effects, it elevates your sound to an incomparable level and transforms your car into an audiovisual spectacle. The high technology in its construction and the automatic multi-impedance system (0.5 to 2 Ohms) make it an extremely versatile powerhouse. Furthermore, it is a robust and resistant product, designed for exceptional performance when used with subwoofers. It has a wide range of colors and light patterns that perfectly sync with the beat of your music. The Big Boss 3 Bass is the ideal choice for those looking for power, flexibility and style in their sound system. Technical information Operation Class: D Number of Channels: 01 Maximum Power - Output power / @14.4 VDC: - 0.5 Ohm: 3,000 W RMS - 1 Ohm: 3,000 W RMS - 2 Ohms: 3,000 W RMS - 4 Ohms: 1,700 W RMS Input Sensitivity: 4V ~ 0.2V Frequency Response: 8Hz ~ 200Hz (-3dB) Crossover High Pass (HPF): 8Hz ~ 30Hz (-12dB/8th) Variable Crossover Low Pass (LPF): 60Hz ~ 200Hz (-12dB/8th) Variable Bass Boost: - Frequency: 35Hz ~ 60Hz - Boost: 0 ~ +10dB Efficiency: 75% Input Impedance: 10K Ohms Output Impedance: 0.5 Ohm ~ 2 Ohms Protection System: Output short circuit, low/high supply voltage and thermal protection Minimum Supply Voltage: 9VDC Maximum Supply Voltage: 17VDC Consumption at Rest: 2.30A Maximum Music Consumption: @14.4VDC: 190A Maximum consumption in sinusoidal signal: 278A Dimensions (WxHxD): 238 x 71 x 240mm Weight: 3.00kg Check the product's compatibility with your equipment so that there are no problems when using it! Please check this with your installer or contracted professional prior to purchase. Check the voltage, power, impedance and other details that could make the installation unfeasible or cause damage to the product or the vehicle or equipment. For products that require installation, this must be done by a qualified professional. We are not responsible for misuse or incorrect installation carried out by the user or another unqualified person.
Description The Taramps BASS 400 digital amplifier module was carefully developed with the latest technology, with high output and performance for automotive sound systems focused on subbass and bass responses, in the frequency range from 8hz to 250hz. It has a maximum power of 400 watts in 1 2 ohm channel, with personalized adjustments according to the size of the trunk and the most prominent frequency of each vehicle, through bass boost and the option to choose the central frequency. This amplifier module can offer much more excessive displacement control, through the subsonic filter, volume control and low pass, to get your bass just right. Technical specifications: Operation class: class d. is the indication of the construction of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows for a small, efficient amplifier with reduced heating compared to other construction classes . Number of channels: 01. Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel. Power @14.4v 2 ohms: 400w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 4 ohms: 214w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Minimum input sensitivity (100% level): 320mv (rca) - 6v (wire). Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. Frequency response: 8hz ~ 250hz(-3db). With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project. Variable crossover low pass (lpf): 55hz ~ 250hz. Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything that is below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers. Variable high pass crossover (hpf): 8hz ~ 30hz (-12db/8th). hpf or high pass filter (term in English), meaning high pass filter, that is, it allows everything above this reference to be reproduced, the common use of this function is to reduce the presence of bass in door speakers, for example . Bass boost: parametric, frequency: 35hz ~ 60hz boost: 0 ~ 12db. Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. Supply voltage: 9 to 17v. It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. Consumption at rest: 0.5a. This is the reference for the consumption of the amplifier turned on and without music. Maximum musical consumption: @14.4vdc: 17.5a. This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume. Maximum consumption in sinusoidal signal: 35a. Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. Protection system: output short, output short in relation to gnd, low voltage protection Impedance, high/low voltage protection and thermal protection. This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. Dimensions: width 13.4cm x height 4cm x depth 13.8cm. Weight: 0.57kg Package contents: 1 BASS 400 amplifier module; 1 connector for wired audio input (input) approximately 20 cm long; QR code to download the manual; 1 Taramps Sticker. Important: We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product.
Description The Taramps BASS 400 digital amplifier module was carefully developed with the latest technology, with high output and performance for automotive sound systems focused on subbass and bass responses, in the frequency range from 8hz to 250hz. It has a maximum power of 400 watts in 1 2 ohm channel, with personalized adjustments according to the size of the trunk and the most prominent frequency of each vehicle, through bass boost and the option to choose the central frequency. This amplifier module can offer much more excessive displacement control, through the subsonic filter, volume control and low pass, to get your bass just right. Technical specifications: Operation class: class d. is the indication of the construction of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows for a small, efficient amplifier with reduced heating compared to other construction classes . Number of channels: 01. Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel. Power @14.4v 2 ohms: 400w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 4 ohms: 214w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Minimum input sensitivity (100% level): 320mv (rca) - 6v (wire). Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. Frequency response: 8hz ~ 250hz(-3db). With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project. Variable crossover low pass (lpf): 55hz ~ 250hz. Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything that is below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers. Variable high pass crossover (hpf): 8hz ~ 30hz (-12db/8th). hpf or high pass filter (term in English), meaning high pass filter, that is, it allows everything above this reference to be reproduced, the common use of this function is to reduce the presence of bass in door speakers, for example . Bass boost: parametric, frequency: 35hz ~ 60hz boost: 0 ~ 12db. Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. Supply voltage: 9 to 17v. It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. Consumption at rest: 0.5a. This is the reference for the consumption of the amplifier turned on and without music. Maximum musical consumption: @14.4vdc: 17.5a. This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume. Maximum consumption in sinusoidal signal: 35a. Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. Protection system: output short, output short in relation to gnd, low voltage protection Impedance, high/low voltage protection and thermal protection. This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. Dimensions: width 13.4cm x height 4cm x depth 13.8cm. Weight: 0.57kg Package contents: 1 BASS 400 amplifier module; 1 connector for wired audio input (input) approximately 20 cm long; QR code to download the manual; 1 Taramps Sticker. Important: We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product.
Its $2300 brand new, The Taramps Bass 20k amplifier is a high-quality audio equipment manufactured by Taramp's. This amplifier is designed to provide powerful sound output for all types of audio devices. With a brand known for producing reliable and durable products, this amplifier is a great choice for music enthusiasts looking to enhance their audio experience.