Seller – Page 23 – Capital Tower

Xantech Dinky Link Surface Mount Standard IR Receiver 480-10D

By |2026-07-24T08:14:06+00:00July 24th, 2026|

480-10D Xantech Dinky Link Surface Mount Standard IR Receiver Condition:New, opened box Included:Includes 3-Terminal Block for easy extension to remote room locations. 480-10D Xantech Dinky Link Surface Mount Standard IR Receiver2 screws,Wire channel for clean installation Specs:Infrared carrier frequency bandwidth: 30 - 100kHz. Reception range: Up to 30 feet, depending on conditions. Nominal reception angle: 55 degrees off axis. Cable requirements: See “INSTALLATION” below. Max. transmission length: 1 mile using 18 gauge wire. Maximum current output: 100mA Drives IR emitters through Xantech Connecting Blocks, Controllers, etc. Dimensions: 2.45”x0.45”x0.35” (63mm x 12mm x 9mm) Power requirements: +12VDC, 10mA.Shipping & Handling:We only ship to the lower 48 states. Additional charges will apply for shipping to Alaska, Hawaii, or Puerto RicoInternational NO APO?s & FBO?s Bidders, please contact before biddingPickups are welcome

0

Xantech Dinky Link Surface Mount Standard IR Receiver 480-10D

By |2026-07-24T08:14:06+00:00July 24th, 2026|

480-10D Xantech Dinky Link Surface Mount Standard IR Receiver Condition:New, opened box Included:Includes 3-Terminal Block for easy extension to remote room locations. 480-10D Xantech Dinky Link Surface Mount Standard IR Receiver2 screws,Wire channel for clean installation Specs:Infrared carrier frequency bandwidth: 30 - 100kHz. Reception range: Up to 30 feet, depending on conditions. Nominal reception angle: 55 degrees off axis. Cable requirements: See “INSTALLATION” below. Max. transmission length: 1 mile using 18 gauge wire. Maximum current output: 100mA Drives IR emitters through Xantech Connecting Blocks, Controllers, etc. Dimensions: 2.45”x0.45”x0.35” (63mm x 12mm x 9mm) Power requirements: +12VDC, 10mA.Shipping & Handling:We only ship to the lower 48 states. Additional charges will apply for shipping to Alaska, Hawaii, or Puerto RicoInternational NO APO?s & FBO?s Bidders, please contact before biddingPickups are welcome

0

Xantech Dinky Link Surface Mount Standard IR Receiver 480-10D

By |2026-07-24T08:14:06+00:00July 24th, 2026|

480-10D Xantech Dinky Link Surface Mount Standard IR Receiver Condition:New, opened box Included:Includes 3-Terminal Block for easy extension to remote room locations. 480-10D Xantech Dinky Link Surface Mount Standard IR Receiver2 screws,Wire channel for clean installation Specs:Infrared carrier frequency bandwidth: 30 - 100kHz. Reception range: Up to 30 feet, depending on conditions. Nominal reception angle: 55 degrees off axis. Cable requirements: See “INSTALLATION” below. Max. transmission length: 1 mile using 18 gauge wire. Maximum current output: 100mA Drives IR emitters through Xantech Connecting Blocks, Controllers, etc. Dimensions: 2.45”x0.45”x0.35” (63mm x 12mm x 9mm) Power requirements: +12VDC, 10mA.Shipping & Handling:We only ship to the lower 48 states. Additional charges will apply for shipping to Alaska, Hawaii, or Puerto RicoInternational NO APO?s & FBO?s Bidders, please contact before biddingPickups are welcome

0

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout

By |2026-07-24T08:14:00+00:00July 24th, 2026|

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout XT-4K-VIP-TX4K Video Over IP Receiver with Audio Breakout and Independent Signal Routing over 1Gb NetworkThe Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.Features:Advanced UHD video over 1Gb NetworkVirtually unlimited system sizeConnect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distributionSupports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmissionVideo up-scaling and down-scalingFeatures 4 operational modes:Matrix distribution (Requires 1Gb network switch)Video wall (Requires 1Gb network switch)One-to-one HDMI extender (No network switch required)One-to-many HDMI splitter (No network switch required)HDCP 2.2 CompliantAdvanced EDID managementAnalog L/R audio embedding and de-embedding on XT-4K-VIP-TX TransmitterAnalog L/R audio breakout on XT-4K-VIP-RX ReceiverBi-directional RS-232 and IR pass throughUSB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devicesPoE (Power over Ethernet) to power Xantech products from PoE switchLocal 24V 1A power input should network switch not support PoE, sold separatelySimple configuration via web-GUI through the XT-4K-VIP-ACMHDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz onlyRS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACMSpecifications:Shipping InfoLength: 10 (Inches)Width: 6.4 (Inches)Height: 2.1 (Inches)Weight: 1.75 (Lbs)Other SpecificationsVideo output: 1 x HDMI Type A, femaleAudio input: 1 x 3.5mm L/R analog audioAudio output: 2 x RCA L/R analog audioVideo input/Ethernet port: 1 x LAN RJ45 connectorVideo/Ethernet extension: 1 x LAN RJ45 connector (PoE 9W)USB / KVM: 2 x USB, Type ARS-232 serial port: 1 x 3-pin Phoenix connectorIR input: 1 x 3.5mm stereo jackIR flasher: 1 x 3.5mm mono jackFirmware update: 1 x USB Micro BAccessories: Mounting kit includedOperating temperature: 32Â°F to 104Â°FStorage temperature: -4Â°F to 140Â°F

0

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout

By |2026-07-24T08:14:00+00:00July 24th, 2026|

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout XT-4K-VIP-TX4K Video Over IP Receiver with Audio Breakout and Independent Signal Routing over 1Gb NetworkThe Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.Features:Advanced UHD video over 1Gb NetworkVirtually unlimited system sizeConnect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distributionSupports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmissionVideo up-scaling and down-scalingFeatures 4 operational modes:Matrix distribution (Requires 1Gb network switch)Video wall (Requires 1Gb network switch)One-to-one HDMI extender (No network switch required)One-to-many HDMI splitter (No network switch required)HDCP 2.2 CompliantAdvanced EDID managementAnalog L/R audio embedding and de-embedding on XT-4K-VIP-TX TransmitterAnalog L/R audio breakout on XT-4K-VIP-RX ReceiverBi-directional RS-232 and IR pass throughUSB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devicesPoE (Power over Ethernet) to power Xantech products from PoE switchLocal 24V 1A power input should network switch not support PoE, sold separatelySimple configuration via web-GUI through the XT-4K-VIP-ACMHDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz onlyRS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACMSpecifications:Shipping InfoLength: 10 (Inches)Width: 6.4 (Inches)Height: 2.1 (Inches)Weight: 1.75 (Lbs)Other SpecificationsVideo output: 1 x HDMI Type A, femaleAudio input: 1 x 3.5mm L/R analog audioAudio output: 2 x RCA L/R analog audioVideo input/Ethernet port: 1 x LAN RJ45 connectorVideo/Ethernet extension: 1 x LAN RJ45 connector (PoE 9W)USB / KVM: 2 x USB, Type ARS-232 serial port: 1 x 3-pin Phoenix connectorIR input: 1 x 3.5mm stereo jackIR flasher: 1 x 3.5mm mono jackFirmware update: 1 x USB Micro BAccessories: Mounting kit includedOperating temperature: 32Â°F to 104Â°FStorage temperature: -4Â°F to 140Â°F

0

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout

By |2026-07-24T08:14:00+00:00July 24th, 2026|

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout XT-4K-VIP-TX4K Video Over IP Receiver with Audio Breakout and Independent Signal Routing over 1Gb NetworkThe Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.Features:Advanced UHD video over 1Gb NetworkVirtually unlimited system sizeConnect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distributionSupports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmissionVideo up-scaling and down-scalingFeatures 4 operational modes:Matrix distribution (Requires 1Gb network switch)Video wall (Requires 1Gb network switch)One-to-one HDMI extender (No network switch required)One-to-many HDMI splitter (No network switch required)HDCP 2.2 CompliantAdvanced EDID managementAnalog L/R audio embedding and de-embedding on XT-4K-VIP-TX TransmitterAnalog L/R audio breakout on XT-4K-VIP-RX ReceiverBi-directional RS-232 and IR pass throughUSB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devicesPoE (Power over Ethernet) to power Xantech products from PoE switchLocal 24V 1A power input should network switch not support PoE, sold separatelySimple configuration via web-GUI through the XT-4K-VIP-ACMHDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz onlyRS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACMSpecifications:Shipping InfoLength: 10 (Inches)Width: 6.4 (Inches)Height: 2.1 (Inches)Weight: 1.75 (Lbs)Other SpecificationsVideo output: 1 x HDMI Type A, femaleAudio input: 1 x 3.5mm L/R analog audioAudio output: 2 x RCA L/R analog audioVideo input/Ethernet port: 1 x LAN RJ45 connectorVideo/Ethernet extension: 1 x LAN RJ45 connector (PoE 9W)USB / KVM: 2 x USB, Type ARS-232 serial port: 1 x 3-pin Phoenix connectorIR input: 1 x 3.5mm stereo jackIR flasher: 1 x 3.5mm mono jackFirmware update: 1 x USB Micro BAccessories: Mounting kit includedOperating temperature: 32Â°F to 104Â°FStorage temperature: -4Â°F to 140Â°F

0

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout

By |2026-07-24T08:14:00+00:00July 24th, 2026|

Xantech XT-4K-VIP-TX 4K Video Over IP Transmitter with Audio Breakout XT-4K-VIP-TX4K Video Over IP Receiver with Audio Breakout and Independent Signal Routing over 1Gb NetworkThe Xantech Premium Video over IP (VIP) platform enables distribution of HDMI video over a 1Gb Network switch. The XT-4K-VIP-TX and XT-4K-VIP-RX are HDCP 2.2 compliant Transmitters and Receivers that use visually lossless compression technology to deliver HDMI, Bi-directional IR, RS-232 and USB/KVM up to lengths of 100m over standard network architecture. The XT-4K-VIP-TX/RX can be powered via PoE from a Network switch or powered locally should a switch either not be used or not support PoE. With multiple configuration options available, this Video over IP solution is ideal for both commercial and residential installations.Features:Advanced UHD video over 1Gb NetworkVirtually unlimited system sizeConnect to any supported Layer 2 / Layer 3 Managed Switch for HDMI video distributionSupports up to 4K HDR UHD video (3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 24Hz 4:4:4, and 4K @ 60Hz4:2:0)Supports all known HDMI audio formats including Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio transmissionVideo up-scaling and down-scalingFeatures 4 operational modes:Matrix distribution (Requires 1Gb network switch)Video wall (Requires 1Gb network switch)One-to-one HDMI extender (No network switch required)One-to-many HDMI splitter (No network switch required)HDCP 2.2 CompliantAdvanced EDID managementAnalog L/R audio embedding and de-embedding on XT-4K-VIP-TX TransmitterAnalog L/R audio breakout on XT-4K-VIP-RX ReceiverBi-directional RS-232 and IR pass throughUSB 2.0 connectivity (backwards compatible with USB 1.1) for KVM and other USB devicesPoE (Power over Ethernet) to power Xantech products from PoE switchLocal 24V 1A power input should network switch not support PoE, sold separatelySimple configuration via web-GUI through the XT-4K-VIP-ACMHDMI audio embedding supports up to 192 Khz, XT-4K-VIP-RX analog audio output supports up to 96Khz onlyRS-232, IR and Telnet/IP integration for control of the VoIP system using Xantech XT-4K-VIP-ACMSpecifications:Shipping InfoLength: 10 (Inches)Width: 6.4 (Inches)Height: 2.1 (Inches)Weight: 1.75 (Lbs)Other SpecificationsVideo output: 1 x HDMI Type A, femaleAudio input: 1 x 3.5mm L/R analog audioAudio output: 2 x RCA L/R analog audioVideo input/Ethernet port: 1 x LAN RJ45 connectorVideo/Ethernet extension: 1 x LAN RJ45 connector (PoE 9W)USB / KVM: 2 x USB, Type ARS-232 serial port: 1 x 3-pin Phoenix connectorIR input: 1 x 3.5mm stereo jackIR flasher: 1 x 3.5mm mono jackFirmware update: 1 x USB Micro BAccessories: Mounting kit includedOperating temperature: 32Â°F to 104Â°FStorage temperature: -4Â°F to 140Â°F

0

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP

By |2026-07-24T08:13:53+00:00July 24th, 2026|

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP From stock room in major university warehouse. Never used. These were to be installed in some conference rooms and serve as emergency replacements. Still in factory packaging (some packaging has been written on by techs or is a little dusty and banged up from moving around over the years). Good for emergency replacement or addition to a system. Buyer should know what they are looking at. Great product and lucky find for all of us old school integration experts!

0

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP

By |2026-07-24T08:13:53+00:00July 24th, 2026|

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP From stock room in major university warehouse. Never used. These were to be installed in some conference rooms and serve as emergency replacements. Still in factory packaging (some packaging has been written on by techs or is a little dusty and banged up from moving around over the years). Good for emergency replacement or addition to a system. Buyer should know what they are looking at. Great product and lucky find for all of us old school integration experts!

0

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP

By |2026-07-24T08:13:53+00:00July 24th, 2026|

Xantech SmartPad3 In-Wall IR Keypad System Programmable Dual Gang Kit PM110KITRP From stock room in major university warehouse. Never used. These were to be installed in some conference rooms and serve as emergency replacements. Still in factory packaging (some packaging has been written on by techs or is a little dusty and banged up from moving around over the years). Good for emergency replacement or addition to a system. Buyer should know what they are looking at. Great product and lucky find for all of us old school integration experts!

0