Brand New Time Microwave LMR-240 type without connectors 50 ohm Coaxial Cable Solid Center Conductor This is a bare cable, without connectors Specification:Impedance: 50 OhmCenter Conductor: Solid Various Lengths Available Note: If you have any questions regarding this listing or another listing please contact us, thank you.
Brand New RG-8/U without connectors 50 ohm Stranded Center Conductor This is a bare cable, without connectors Specification:Impedance: 50 OhmCenter Conductor: Stranded Various Lengths Available Note: If you have any questions regarding this listing or another listing please contact us, thank you.
Brand New RG-213/U without connectors 50 ohm Stranded Center Conductor This is a bare cable, without connectors Specification:Impedance: 50 OhmCenter Conductor: Stranded Various Lengths Available Note: If you have any questions regarding this listing or another listing please contact us, thank you.
Brand New RG-8X without connectors 50 ohm Coaxial Cable Stranded Center Conductor This is a bare cable, without connectors Specification:Impedance: 50 OhmCenter Conductor: Stranded Various Lengths Available Note: If you have any questions regarding this listing or another listing please contact us, thank you.
The CT Sounds Meso 25mm tweeters are 100-watt flush-mount silk-dome tweeters engineered to provide an accurate reproduction of your favorite tracks. The 1-inch tweeters feature a CCAW voice coil suspended in ferrofluid and a neodymium magnet which allows the car tweeters to recreate vocals and other high frequencies like never heard before. Furthermore, these 25mm silk-dome tweeters are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp. Included in the set: (2) 25 mm silk-dome tweeters, (2) ABS crossover boxes, and (2) tweeter connecting wires.Technical Specifications:Tweeter size: 25mm / 1"Tweeter type: Silk-dome (Flush mount)Impedance per tweeter: 4-OhmPower per tweeter: 25W (RMS) | 50W (MAX)Total system power: 50W (RMS) | 100W (MAX)Tweeter:Sweep voltage: 2.8 VOutput SPL (@1w/1m): 90 dBFrequency response (@SPL -10dB): 1.5 kHz ~ 21 kHzResonant frequency: 2 kHzMagnet type: N38H NeodymiumCrossover:Crossover circuit: 4μF / 100VCrossover point: 3.5 kHzFilter for tweeter: 12 dBMounting / Installation Parameters:Cutout diameter: 47mm / 1.85"Outer diameter: 55mm / 2.17"Mounting depth: 16mm / 0.63"
Shop by category Home About Feedback Newsletter Contact Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Shop by category Home About Feedback Newsletter Contact Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
INCLUDES: 2x D3220Ph-Nd 2″ Midrange Neodymium Driver 8 Ohm - 600 Watts package - 300 Watts each driver FEATURES: Innovative technology for 3 inch compression drivers, featuring Powerful neodymium motor for minimal size and weight, allows you to keep a large voice coil without sacrificing performance.The D3220Ph-Nd is our best driver for vocal reinforcement in car audio systems due to its impressive power-to-size ratio and ability to deliver low midrange response from 650 to 7,500Hz, pure midrange vocal reproduction.With this innovative technology, car audio enthusiasts can now build 3 or 4-Way Systems with more sound quality and performance in their vehicles.With a nearly indestructible phenolic diaphragm and a 3 inch voice coil, this Brazilian technology delivers natural vocal midrange response at an efficient of 109 dB sensitivity.Extremely powerful neodymium magnet for minimal size and weight without sacrificing output capabilityWorks great with any Shallow Horn from WGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver designed for vocal reinforcement on 3-Way car audio systems with a usable frequency response from 600 to 7,500 HzPRO Audio midrange driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ph-Nd neodymium phenolic compression horn driver, offers the best performance for size ratio, features a powerful neodymium magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 4.88″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series. TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.The phenolic diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 800 Hz at 12 dB per octave filter Crossover / BT12700 Hz at 18 dB per octave filter Crossover / BT18Its compact size combined with high power handling provides great output capabilities make this midrange driver one of the smallest 2” exit vocal driver in the market!PRV D3220Ph-Nd 2″ Midrange Neodymium Driver 300 Watts 8 Ohm – TRIO Phenolic Diaphragm 3” Voice Coil, High Performance and LightweightGENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m109 dBRecommended Hi Pass CrossoverFor Full Power Handling800 Hz12db/oct CrossoverFrequency Response at -10dB600 – 7,500 HzVoice Coil Diameter3” (76.2 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolicFlux Density1.80 TMagnet MaterialNeodymium Overall Diameter4.88″ (124 mm)Overall Depth2.21″ (56 mm)Mounting Bolt circleM6 x 4″ (102 mm)Net Weight5.0 lbs (2.27 kg)Shipping Weight5.27 lbs (2.39 kg)Carton Dimensions W x L x H5.90” x 5.31” x 3.15”(150 x 135 x 80 mm)
INCLUDES: 4x D3220Ph-Nd 2″ Midrange Neodymium Driver 8 Ohm - 1800 Watts package - 300 Watts each driver FEATURES: Innovative technology for 3 inch compression drivers, featuring Powerful neodymium motor for minimal size and weight, allows you to keep a large voice coil without sacrificing performance.The D3220Ph-Nd is our best driver for vocal reinforcement in car audio systems due to its impressive power-to-size ratio and ability to deliver low midrange response from 650 to 7,500Hz, pure midrange vocal reproduction.With this innovative technology, car audio enthusiasts can now build 3 or 4-Way Systems with more sound quality and performance in their vehicles.With a nearly indestructible phenolic diaphragm and a 3 inch voice coil, this Brazilian technology delivers natural vocal midrange response at an efficient of 109 dB sensitivity.Extremely powerful neodymium magnet for minimal size and weight without sacrificing output capabilityWorks great with any Shallow Horn from WGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver designed for vocal reinforcement on 3-Way car audio systems with a usable frequency response from 600 to 7,500 HzPRO Audio midrange driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ph-Nd neodymium phenolic compression horn driver, offers the best performance for size ratio, features a powerful neodymium magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 4.88″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series. TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.The phenolic diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 800 Hz at 12 dB per octave filter Crossover / BT12700 Hz at 18 dB per octave filter Crossover / BT18Its compact size combined with high power handling provides great output capabilities make this midrange driver one of the smallest 2” exit vocal driver in the market!PRV D3220Ph-Nd 2″ Midrange Neodymium Driver 300 Watts 8 Ohm – TRIO Phenolic Diaphragm 3” Voice Coil, High Performance and LightweightGENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m109 dBRecommended Hi Pass CrossoverFor Full Power Handling800 Hz12db/oct CrossoverFrequency Response at -10dB600 – 7,500 HzVoice Coil Diameter3” (76.2 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolicFlux Density1.80 TMagnet MaterialNeodymium Overall Diameter4.88″ (124 mm)Overall Depth2.21″ (56 mm)Mounting Bolt circleM6 x 4″ (102 mm)Net Weight5.0 lbs (2.27 kg)Shipping Weight5.27 lbs (2.39 kg)Carton Dimensions W x L x H5.90” x 5.31” x 3.15”(150 x 135 x 80 mm)