Easy to install with no power needed, simply connect the SMC21 between the stereo source outputs and right and left inputs of the power amplifier. An ideal solution for 70V and 8-ohm multi-channel projects, integrators often use this convertor with our XPA Series 70V power amplifier or our MX Series 8 ohm multi-channel amplifiers.
Whole-Home Audio Experience – Seamlessly play any of six sources across up to six rooms, with the ability to expand coverage up to 18 rooms for a comprehensive, immersive music experience throughout your entire home.Diverse Input Options – Equipped with four stereo line-level L&R RCA analog source inputs, a dedicated 3.5mm analog input, and an optical/3.5mm combination source input, this device caters to all your audio source needs.Versatile Pre-Amp Outputs – Features six stereo line-level pre-amp L&R RCA outputs (zones 1-6), providing flexible connectivity options with multichannel power amplifiers to enhance your audio output experience.Interactive Keypad Control – Optional control keypads offer built-in IR receivers for each zone, granting you an intuitive control interface for volume and source selection, enhancing the user experience.Convenient Remote Control – Includes an IR remote as part of the optional control keypad kit, complemented by a Cat5e network cable hub, ensuring optimal control and flexibility for your multi-room audio setup.The NERO Control12 is a highly flexible multi-channel audio distribution system that controls up to six zones with up to six different sources for well-rounded and easy-to-manage residential and commercial audio systems. This multi-functional and highly compatible and expandable controller is engineered with cutting-edge features including full control from iOS and Android devices. The free App duplicates the optional control keypads and allows you to select zones, adjust volume, treble and bass, or turn all zones on or off directly through a smartphone or tablet. Designed with A/V integrators and homeowners who want the most flexibility, the NERO Control12 includes numerous input sources including four stereo line-level RCA, one 3.5mm aux, and one optical/3.5mm combo analog source input. In addition, RS232 and ethernet ports allow transferring and receiving the serial data between home automation systems. The Control12 can be used in conjunction with both the MAX8 and MAX12 to support larger scale multi-zone applications. The Nero Control12 can control six separate stereo zones or rooms, and when coupled with our multichannel power amps can power in-ceiling, in-wall, or outdoor speakers, delivering genuinely great sound. Control is via a free App and sources can be anything from an old CD player to an Echo dot. Any of the six sources can be played in any of the rooms, or all of them. Specifications:Amplifier Type: WiFi 6 Zone Pre AmpFrequency Response: 20Hz-20KHz (-0.5dB)Impedance: >47 K OhmsTransformer Type: Switching PowerInputs: RCA, 3.5mm stereo, Optical, RJ45, RS-232Outputs: 12 x Pre-AmplifierSignal to Noise Ratio: >110 dB A-weightedAir-cooled or Fan-cooled: Air-cooledRemote Control: App controlled (Optional Remote)12 Volt Triggers: YesAuto-On Sensing: YesSub-Out: NoPower Supply: DC 15V/1.6ARack Mountable: YesDimensions (L x D x H): 17.32" x 7.72" x 1.73"Weight: 4.5 lbsRating: CE
OSD XMP100 amplifier makes a great choice for powering speakers in your home, studio or desktop sound system. This versatile amp's 24/192 USB Audio, and dual line-level inputs let you enjoy sound from one main music source plus an additional interrupting audio source, switching automatically between them. Select your TV, Digital Audio device or portable music player as the primary source. Turn on the source and the XMP100 senses the signal, turns itself on, and sends the music to your speakers. Then, if you connect another music source like our SRT1 Gen2 music streamer to the secondary Interrupt input the amp will switch to that source whenever it senses an incoming music signal. When that source stops playing, the XMP100 will automatically switch back to the previous source. There's no need to manually switch inputs. The 24/192 Digital Stereo Power Amplifier OSD Audio XMP100 is designed for dedicated stereo & distributed audio applications. It offers many features including A & B speaker outputs. USB Type A 24/194 HD Audio, RCA Line In, and Interrupt Line In inputs. It can also be configured for Stereo or Bridged output, delivering up to 200 watts. Features 2 x 100 Watts RMS 4 Ohms, for high power sound 1 x 200 Watts Bridged for maximum power Class D design for maximum efficiency and low cost running Greater than 90 dB SNR for low noise and clear sound 4 separate inputs including an automatic switching source provides a lot of flexibility Volume, Balance, Bass and Treble controls allows you to ‘dial-in’ exactly the sound you want Two pairs of speakers can be connected and switched on and off (8 Ohms), great for additional speakers outdoors or in another room. Trigger or Auto sensing on and off, once set up, you can hide your amp away and just enjoy the sound.
Impedance: 8 Ohms/ 70V. Woofer: 6.5" Polypropylene Cone with Rubber Surround. Power Handling: 100W. Sold As: Single.
4Ohm - 300W x 2 Channel RMS/Output 4Ohm. Signal to Noise Ratio: 90>dB 300W output into 4Ohm 20kHz Low-pass Filter. The 24/192 Digital Stereo Power Amplifier OSD Audio XMP300 is designed for dedicated stereo & distributed audio applications.
AUDIOPHILE, CLASS D HOME THEATER OR OUTDOOR AUDIO AMP: A powerful and affordable 6-channel, fan cooled, Class D amplifier rated at 6 x175 Watts (4 ohms), 100W (8 ohms), all channels driven. Adjacent channels can be bridged, to provide 3 x 400 watts, 8 Ohms or 2 x 400 watts and 2 x 175 watts, or 1 x 400 watts and 4 x 175 watts. Two of the channels can be bridged and used as a subwoofer amp with frequency x-over and level control. Hi-Fi AUDIO: RCA connections ensure a seamless setup. 12V TRIGGER: Control for remote power on/off. INDIVIDUAL CHANNEL LED’s: displays the amp’s status - ON, Standby, or Protection mode. 105 dB SNR: at rated power, for exceptional dynamic range. Ground terminal to help troubleshoot hum issues Audiophile, high-powered, low-noise and distortion, 6-channel amplifier. Highly configurable, 3, 4, 5 or 6 channels with subwoofer controls. Fan assisted, Cool-running Class D design that can be used in confined spaces such as a rack or credenza. Switching power supply provides excellent rejection of RF from nearby electronics or mains. This is the ideal home theater amps for use in less than perfectly ventilated spaces. This is also the perfect amp for an outdoor system that comprises main speakers and a passive subwoofer. 400 watts is available to power a subwoofer and 175 watts for each of four patio speakers. The HTD6150 can easily achieve the reference cinema sound levels of 105dB from all channels. The HTD6150 is rated at 175 Watts per channel, all channels driven (not just one channel, as stated by most competitors) into 4 Ohms. Used with typical speakers, this allows for a sound-pressure level of 109-112dB, 4-7dB more than required for reference sound levels. The additional dB’s means the amplifier is working well within its normal range, and this keeps the distortion low. (A good example of this is turning your TV up too much - it does not sound good. This is because the closer you get to full power the higher the distortion.) With this amplifier at 105dB, the distortion is below 0.02%. By choosing the best components, we can also achieve 105dB SNR at full power. This allows for a very wide dynamic range, allowing you to hear the softest and loudest sounds more clearly. This combination of performance specifications is hard to find from any amplifier, regardless of price. By choosing an OSD HTD amplifier, you have achieved the goal of great performance at an affordable price. 175 watts per channel into 4 ohms (10-30,000 Hz) at <1% THD with all 6 channels driven. 100 watts per channel into 8 ohms (10-30,000 Hz) at <1% THD with all 6 channels driven. Specifications: OUTPUT POWER (RMS) @ 0.1% THD (Single Channel): 4 Ohms: 150 W 8 Ohms: 85 W OUTPUT POWER (RMS) @ 1% THD (Single Channel): 4 Ohms: 200 W 8 Ohms: 120 W ALL CHANNEL OUTPUT POWER (RMS) @ 0.1% THD: 4 Ohms: 130 W 8 Ohms: 75 W ALL CHANNEL OUTPUT POWER (RMS) @ 1% THD: 4 Ohms: 175 W 8 Ohms: 100 W Bridged Rating (RMS) @ 1% THD (Single Channel): 8 Ohms: 400 W Frequency Response: 12-39kHz Signal to Noise Ratio (A-weighted): 105 dB Damping Factor (1kHz, 8 Ohms): 90 Idle Current: 0.19 Amps Max Current @ All Channels Rated Power: 8.7 Amps Efficiency of Amplifier: 88% Amplifier Type: D Transformer Type: SMPS Air-Cooled or Fan-Cooled: Fan 12 Volt Triggers: Yes Auto-On Sensing: No Sub-Out: Yes Power Supply: 110/120 or 220/240V Rack Mountable: Yes Dimensions: (LxWxH): 15.16 "x 16.81" x 3.46" Weight: 3.57 KG / 7.88 lbs Certification: CE/UL