Five Star Outdoor 4K HDTV Antenna 200 Miles 360 Degree UHF/VHF/FM W/ J-Pole
Up to 25% more reflected area to enhance the receptions for all Channels. High quality copper cable to enhance the signal transmission from antenna to the receiver. Special wind proof design to enhance the durability of the Antenna.
Small Ham Radio Antenna Rotator 12VDC NOS Never Seen One Before 360 Degree Radi
AS SHOWN ESTATE FIND SMALL ANTENNA ROTATOR NEVER SEEN ONE BEFORE IF YOU KNOW WHO MADE THEM OR WHAT ANTENNAS THEY WERE USED FOR TELL ME Small Ham Radio Antenna Rotator 12VDC NOS Never Seen One Before 360 Degree Radius THANKS JERRY HOMBASE EWMRLOWERSHELF
JETSTREAM JTM6NMO 5.5in MAGNETIC MAGNET NMO ANTENNA MOUNT & COAX CABLE
Accepts antennas with NMO mount.
Hot Rod CB Antenna in Black, 5.5 ft.
The 66 in. Hot Rod CB antenna is rated at 225-Watt and 3/8 in. Individually pre-tuned unique top cap design for maximum performance and exclusive double helical winding. Custom fiberglass formula for a flexible, long-lasting antenna.
JETSTREAM JTM6SO 5.5in MAGNETIC MAGNET SO-239 ANTENNA MOUNT
New 5.5in magnetic antenna mount with 16.5Ft of RG-58/U coax and molded PL-259 connector. Has SO-239 jack to accept antennas with PL-259 base.
JETSTREAM JTM6 5.5in MAGNETIC MAGNET 3/8-24 ANTENNA MOUNT & COAX CABLE
New 5.5in diameter magnetic antenna mount with 16.5Ft of RG-58/U coax cable and molded PL-259 connector. Accepts 3/8"-24 threaded antennas. This item ships USPS Ground, UPS or FedEx mail within the Continental US depending on location at our discretion. This item is not available for direct shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.
HF End Fed Dipole UJM-EFHW-40-10 200W 40-10m / NO TUNER NEEDED!! / 65 ft long
eBay's Top Portable Antenna Seller NO TUNER NEEDEDTHIS IS THE UJM-40-10EFHW This antenna is made by using a matching network consisting of a 49:1 bifilar wound toroid with the needed capacitance added for wide, multi band, no tuner needed operation. PLEASE LOOK AT ALL PICTURES TO SEE THE DETAILS AND CRAFTSMANSHIP! I NOW OFFER A 75/80 METER RESONATOR KIT FOR THIS ANTENNA THAT ONLY ADDS APPROX 6 FEET TO THE ANTENNA LENGTH! FOR THOSE IN TIGHT SPACES THIS IS A GAME CHANGER. That kit is eBay item number 203336978970I also offer a full length 80-10 meter version of this antenna. Click on my items to see that antenna. This sale is for a true, half wave end fed antenna for 40-10 metersThis antenna is rated at 200W PEP and 75W digital/CW@50/50 duty and is PERFECTfor both portable or permanent installations! This antenna comes complete with 65 feet of stealthy but strong MARINE fully tinned 18AWG insulated stranded copper wire, dogbone insulator and all Stainless Steel hardware on the matching box. Marine wire is tough and made for harsh environments. The box is sealed with a foam gasket as well. Without a tuner the antenna works 40,20,15, 10 and usually 12 meters as well. 12 meters will depend on your setup.With a decent tuner you can also tune 30 and 12 meters and 17 meters. You cannot tune 80m on this antenna. That 80-10m version will be in one of my other listings for a few more dollars and is 130 feet long. One of the great things about this antenna is that the height you mount it will have a smaller affect on SWR than other antenna types. This gives you a large flexibility in your installation. One huge advantage of these antennas is that they typically have very good "ears" with a low noise floor! As you can see from the picture the antenna box does come with the mounting eye-bolt wired for optional ground however with this type of antenna adding a ground or counterpoise will have little to no affect on the antenna tuning and is not needed since it's built as a DC ground potential antenna already. Also, NO RF CHOKE NEEDED IN MOST INSTALLATIONS! That said, a rf choke is always good practice and I do have my own designed choke/s with full choking specifications listed with the one authorized distributor for them. It can be found by putting the eBay item number in the eBay search bar. That number is 264946030545 Another advantage of this antenna is the endless ways you can deploy it. I recommend a simple sloper installation and you can mount the box close to the ground with your element sloping upwards. When installed as a sloper you will see fantastic results if you can get the far end of the element up to 25' or more. That being said, you can install this antenna: horizontal, vertical, inverted "L", zigzag and more. The screenshot pictures shown above on the Rigol Spectrum Analyzer and SWR at the radio are shown with the antenna in a sloper configuration with the box fed at 5 feet and the far end up at 27' from the ground fed with 75' of LMR400 coax. Your unique installation may vary those reading a bit. This is a very simple antenna to install and no extra instructions are necessary but if you do have any questions please feel free to ask. Simply secure a cord to the mounting eye-bolt and stretch out your element for your installation and secure it. Great for ALE HF-link stations, NVIS, MARS, ARES, EMCOMMI have produced and sold more than 15,000 antennas here on eBay alone and still maintain a 100% positive feedback for a reason. everything I make and send is made by myself, no help allowed and only made as if it were as my own antenna. I feed my family this way and so my customers ALWAYS get the highest level of quality and customer service I can provide. To put it simple, my livelihood depends on it. If anyone has an issue at all, please just send me a message through eBay and I will take care of you as I have done on here for over 7 years now. I also have 9:1 unun Random Wire Matchboxes that are designed to be used with a tuner on all bands with a *random* length wire as well. PLEASE LOOK AT MY OTHER LISTINGS!73KD8UJM
HF End Fed Dipole UJM-EFHW-80-10 200W 80-10m / NO TUNER NEEDED!! / 130 ft long
eBay's Top Portable Antenna Seller NO TUNER NEEDED THIS IS THE UJM-EFHW-80-10 This antenna is made by using a matching network consisting of a 49:1 bifilar wound toroid with the needed capacitance added for wide, multi band, no tuner needed operation. PLEASE LOOK AT ALL PICTURES TO SEE THE DETAILS AND CRAFTSMANSHIP! This sale is for a true, half wave end fed antenna for 80-10 meters This antenna is rated at 200W PEP and 75W digital/CW@50/50 duty and is PERFECT for both portable or permanent installations! This antenna comes complete with 130 feet of stealthy but strong MARINE 18AWG fully tinned insulated copper stranded wire. Marine wire is tough and made for harsh environments. Nylon UV dogbone insulator and all Stainless Steel hardware on the matching box. The box is sealed with a foam gasket as well. Without a tuner the antenna works 80,40,20,15, 10 and usually 12 meters as well. 12 meters will depend on your setup. With a decent tuner you can also tune 30 and 12 meters and 17 meters. I do also have a 40 thru 10 meter version listed for sale and is only 65 feet long. One of the great things about this antenna is that the height you mount it will have a smaller affect on SWR than other antenna types. This gives you a large flexibility in your installation. One huge advantage of these antennas is that they typically have very good "ears" with a low noise floor! Please note, I used the same pictures for this listing as my 40-10 meter version so the 80m SWR is not shown but just as good as others. As you can see from the picture the antenna box does come with the mounting eye-bolt wired for optional ground however with this type of antenna adding a ground or counterpoise will have little to no affect on the antenna tuning and is not needed since it's built as a DC ground potential antenna already. Also, NO RF CHOKE NEEDED IN MOST INSTALLATIONS! Antenna uses a standard SO-239 connector to accept your coax with PL-259 connectors. Most users will find no rf issues and find no rf choke is needed. That said, using a GOOD rf choke is always good ham practice and I do have my own designed choke/s with full choking specifications listed with the one authorized distributor for them. It can be found by putting the eBay item number in the eBay search bar. That number is 264946030545 Another advantage of this antenna is the endless ways you can deploy it. I recommend a simple sloper installation and you can mount the box close to the ground with your element sloping upwards. When installed as a sloper you will see fantastic results if you can get the far end of the element up to 25' or more. That being said, you can install this antenna: horizontal, vertical, inverted "L", zigzag and more. The screenshot pictures shown above on the Rigol Spectrum Analyzer and SWR at the radio are shown with the antenna in a sloper configuration with the box fed at 5 feet and the far end up at 27' from the ground fed with 75' of LMR400 coax. Your unique installation may vary those reading a bit. This is a very simple antenna to install and no extra instructions are necessary but if you do have any questions please feel free to ask. Simply secure a cord to the mounting eye-bolt and stretch out your element for your installation and secure it. Great for ALE HF-link stations, NVIS, MARS, ARES, EMCOMM I have produced and sold more than 15,000 antennas here on eBay alone and still maintain a 100% positive feedback for a reason. everything I make and send is made by myself, no help allowed and only made as if it were as my own antenna. I feed my family this way and so my customers ALWAYS get the highest level of quality and customer service I can provide. To put it simple, my livelihood depends on it. If anyone has an issue at all, please just send me a message through eBay and I will take care of you as I have done on here for over 7 years now. I also have 9:1 unun Random Wire Matchboxes that are designed to be used with a tuner on all bands with a *random* length wire as well. PLEASE LOOK AT MY OTHER LISTINGS! 73 KD8UJM
Replacement 80-10m element section for the UJM-EFHW-80-10 1kW (Not 200W) antenna
Replacement wire for UJM-80-10-1kW+ antenna. Includes coil, clamp and insulator and soldered connector as shown. Does not include the clamp for attaching the element to the box because you should already have that. Approx 130' long. This is the element only and not the complete antenna. This listing is meant as a replacement for the UJM-EFHW-80-10-1kW+ antenna. This is not the element for the 200W antenna version. If you own the UJM-EFHW-40-10-1kW+ antenna, this tuned element is a direct swap for your 40-10m unit to gain 80 meters as well. Length of this element is approximately 130 feet long. This tuned element is made with the same material used in my complete antenna. MARINE fully tinned16AWG insulated stranded copper element wire with stainless hardware and UV insulator. Marine wire is tough and made for harsh environments