counter for wordpress

Taramps THE BIG BOSS 3 BASS 0,5 ~ 2 Ohms 3000 Watts Rms Exceptional Performance

By |July 23rd, 2026|

Description THE BIG BOSS 3 BASS is much more than an amplifier; brings together the best technology available in terms of audio and design. With 108 RGB LED effects, it elevates your sound to an incomparable level and transforms your car into an audiovisual spectacle. The high technology in its construction and the automatic multi-impedance system (0.5 to 2 Ohms) make it an extremely versatile powerhouse. Furthermore, it is a robust and resistant product, designed for exceptional performance when used with subwoofers. It has a wide range of colors and light patterns that perfectly sync with the beat of your music. The Big Boss 3 Bass is the ideal choice for those looking for power, flexibility and style in their sound system. Technical information Operation Class: D Number of Channels: 01 Maximum Power - Output power / @14.4 VDC: - 0.5 Ohm: 3,000 W RMS - 1 Ohm: 3,000 W RMS - 2 Ohms: 3,000 W RMS - 4 Ohms: 1,700 W RMS Input Sensitivity: 4V ~ 0.2V Frequency Response: 8Hz ~ 200Hz (-3dB) Crossover High Pass (HPF): 8Hz ~ 30Hz (-12dB/8th) Variable Crossover Low Pass (LPF): 60Hz ~ 200Hz (-12dB/8th) Variable Bass Boost: - Frequency: 35Hz ~ 60Hz - Boost: 0 ~ +10dB Efficiency: 75% Input Impedance: 10K Ohms Output Impedance: 0.5 Ohm ~ 2 Ohms Protection System: Output short circuit, low/high supply voltage and thermal protection Minimum Supply Voltage: 9VDC Maximum Supply Voltage: 17VDC Consumption at Rest: 2.30A Maximum Music Consumption: @14.4VDC: 190A Maximum consumption in sinusoidal signal: 278A Dimensions (WxHxD): 238 x 71 x 240mm Weight: 3.00kg Check the product's compatibility with your equipment so that there are no problems when using it! Please check this with your installer or contracted professional prior to purchase. Check the voltage, power, impedance and other details that could make the installation unfeasible or cause damage to the product or the vehicle or equipment. For products that require installation, this must be done by a qualified professional. We are not responsible for misuse or incorrect installation carried out by the user or another unqualified person.

USA DEALER- Taramps BASS 1200 1 Ohm 1 Channel Amplifier 1200W RMS, Class D

By |July 23rd, 2026|

The BASS 1200 amplifier is a robust and efficient solution for those looking for excellence in sub-bass and bass frequencies. With 1200 W RMS and available in 1 Ohm, 2 Ohm or 4 Ohm versions, it has a frequency response of 8 Hz to 250 Hz, which makes it ideal for subwoofers. The audio inputs via RCA and WIRE (High Level) guarantee more versatility, allowing use with most players on the market, including original multimedia, without the need for adapters.Equipped with gain adjustment (0.2 to 4V), crossover with subsonic adjustment from 8 to 30Hz and LPF from 60 to 250Hz, and variable Bass Boost, it allows you to choose the central frequency between 35 and 60Hz and increase the bass by up to 10 dB.The aluminum frame, combined with the Smart Cooler, ensures efficient heat dissipation and silent operation.

USA DEALER- Taramps BASS 1200 4 Ohms 1 Channel Amplifier 1200W RMS, Class D

By |July 23rd, 2026|

The BASS 1200 amplifier is a robust and efficient solution for those looking for excellence in sub-bass and bass frequencies. With 1200 W RMS and available in 1 Ohm, 2 Ohm or 4 Ohm versions, it has a frequency response of 8 Hz to 250 Hz, which makes it ideal for subwoofers. The audio inputs via RCA and WIRE (High Level) guarantee more versatility, allowing use with most players on the market, including original multimedia, without the need for adapters.Equipped with gain adjustment (0.2 to 4V), crossover with subsonic adjustment from 8 to 30Hz and LPF from 60 to 250Hz, and variable Bass Boost, it allows you to choose the central frequency between 35 and 60Hz and increase the bass by up to 10 dB.The aluminum frame, combined with the Smart Cooler, ensures efficient heat dissipation and silent operation.

Taramps BASS 5K Mono Car Audio Amplifier 5000W RMS 1 Ohm MPN BASS 5K

By |July 23rd, 2026|

Taramps BASS 5K Mono Car Audio Amplifier 5000W RMS 1 Ohm MPN BASS 5K

Taramps THE BIG BOSS 3 BASS 3000W RMS Class-D Monoblock Amplifier

By |July 23rd, 2026|

3000W RMS at 0.5 ohms. 3000W RMS at 1 ohm. 3000W RMS at 2 ohms. 1700W RMS at 4 ohms. Bass Boost: 35 Hz - 60 Hz, 0 to +10 dB. Low Pass Filter (LPF): 60 Hz - 200 Hz (Variable, -12dB/8ª). Operation: Class D.

Taramps Bass 400 – 2 Ohms / Digital Amplifier 400 Watts Rms Class D – 1 Channel

By |July 23rd, 2026|

Description The Taramps BASS 400 digital amplifier module was carefully developed with the latest technology, with high output and performance for automotive sound systems focused on subbass and bass responses, in the frequency range from 8hz to 250hz. It has a maximum power of 400 watts in 1 2 ohm channel, with personalized adjustments according to the size of the trunk and the most prominent frequency of each vehicle, through bass boost and the option to choose the central frequency. This amplifier module can offer much more excessive displacement control, through the subsonic filter, volume control and low pass, to get your bass just right. Technical specifications: Operation class: class d. is the indication of the construction of an amplifier, class d (also called digital) due to the pwm (pulse width modulation) used in its operation, it allows for a small, efficient amplifier with reduced heating compared to other construction classes . Number of channels: 01. Number of channels to use in your project, with this specific model you have the option of connecting only 1 channel. Power @14.4v 2 ohms: 400w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Power @14.4v 4 ohms: 214w rms. The power with a voltage of 14.4 volts is related to the operation of the vehicle/power source. Minimum input sensitivity (100% level): 320mv (rca) - 6v (wire). Lower voltage required for maximum results with the amplifier, that is, with low volume on the radio, we will achieve good results. Frequency response: 8hz ~ 250hz(-3db). With the frequency response it is possible to identify the application of the amplifier, so if the speaker or any other type of transducer you are using is understood within this response, it means that we can use that product in your project. Variable crossover low pass (lpf): 55hz ~ 250hz. Lpf or low pass filter (term in English) means low pass filter, that is, it allows everything that is below this reference to be reproduced and what is above this indication will not be used, a common use of this function is to reduce the presence of voice on subwoofers. Variable high pass crossover (hpf): 8hz ~ 30hz (-12db/8th). hpf or high pass filter (term in English), meaning high pass filter, that is, it allows everything above this reference to be reproduced, the common use of this function is to reduce the presence of bass in door speakers, for example . Bass boost: parametric, frequency: 35hz ~ 60hz boost: 0 ~ 12db. Bass boost is the bass reinforcement for the amplifier's sub channel, that is, an "extra" reinforcement for the bass. Supply voltage: 9 to 17v. It is the operating indication of the amplifier where it will have the minimum and maximum voltage for its operation, outside of this specification it will not turn on or activate protection. Consumption at rest: 0.5a. This is the reference for the consumption of the amplifier turned on and without music. Maximum musical consumption: @14.4vdc: 17.5a. This is the estimated consumption of the amplifier working at the minimum impedance playing music at maximum volume. Maximum consumption in sinusoidal signal: 35a. Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. Protection system: output short, output short in relation to gnd, low voltage protection Impedance, high/low voltage protection and thermal protection. This system exists to protect the operation of the amplifier. It can be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems. This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier heats up above normal. Dimensions: width 13.4cm x height 4cm x depth 13.8cm. Weight: 0.57kg Package contents: 1 BASS 400 amplifier module; 1 connector for wired audio input (input) approximately 20 cm long; QR code to download the manual; 1 Taramps Sticker. Important: We recommend that installation be carried out by a specialized professional and we are not responsible for misuse of the product.

NEW Taramps Bass 15k 15000W 1 Ohm Car Amplifier- USA DEALER – SAME DAY SHIPPING

By |July 23rd, 2026|

eBay NEW Taramps Bass 15k 15000W 1 Ohm Car Amplifier- USA DEALER - SAME DAY SHIPPING FEATURESLine: BASSReference: BASS 15KOperation Class: Classe DNumber of Channels: 01Max Output Power: @ 14.4 VDC – 1 OHM: 15000 W RMS @ 14.4 VDC – 2 OHMS: 8505 W RMSInput Sensitivity: 280mVSignal Noise/Ratio: >95dBFrequency Response: (-3dB) 8Hz a 250HzCrossover High Pass (HPF): Variable, 8 a 30Hz (-12dB/8)Crossover Low Pass (LPF): Variable, 60 a 250Hz (-12dB/8)Bass Boost: Parametric, (35 a 60Hz) 0 a +12dBEfficiency: 80%Input Impedance: 22K OhmsProtection System: Short-Circuit to Output, Short on output compared to GND, Low impedance at output, High/Low supply voltage and Thermal protectionMinimum Supply Voltage: 9VDCMaximum Supply Voltage: 17VDCIdle Consumption: 400mAMusical Maximum Consumption: 651ASinusoidal Signal Maximum Consumption: 1302ADimensions (WxHxD): 238 x 71 x 544 mmWeight: 9.70Kg About Us Shipping Returns Contact Us The RDCARSHOW team has been supplying electronic parts and accessories since 2013, and we will continue to provide our customers with a remarkable and memorable experience before, during and after their purchase. We value our oldest customers, as well as new ones, and we work every day in every area of our company to earn their trust and reward their decision to choose us as a supplier. Our entire team shares a passion for electronics – we are 100% committed to offering products and services that satisfy our demanding customers. How do we ship our products? We use variety of shipping carriers including USPS, UPS, and FedEx. Do you offer free shipping? We offer FREE shipping to almost all States of the U.S.A... Currently, customers residing in Hawaii and Alaska do not qualify for free shipping. International shipments will be subject to shipping costs that are calculated at the time of purchase, and will be subject to any fees or duties charged by the carrier additionally. Please be aware that these duties and fees are not calculated into the shipping cost at the time of checkout. Do you offer international shipping? We offer international shipping, please check the estimated costs and fees at checkout. How long will it take to get my order? Most of the orders inside of the United States take around 3 business days. Orders placed over the weekend or after business hours will ship out the following business day. For Acoustic boxes, such as Radio Boxes, Driver Tables, Kitipos and similar, they take around 6-8 working days to be build and then we ship them. We process and pay all returns for up to 14 days! If you wish to cancel an order, you can send us a message detailing the reason. You can contact us anytime before during or after your order. We're always glad to help!. Message Us Via eBay Messages Click Here To Send Us a Message! MORE PRODUCTS NEW Taramp's DS 2000x4 4-Channel 2000W RMS -USA DEALER - SAME DAY SHIPPING $323.99 Taramp's DS 1200x4 1200 Watts 4 Channels 2ohm- USA DEALER - SAME DAY SHIPPING $284.99 Taramp's DS 800x4 2 Ohms 4 Channels 800 Watts- USA DEALER - SAME DAY SHIPPING $152.99 NEW Taramps BASS 3K Amplifier 3000W 10HM USA DEALER - SAME DAY SHIPPING $276.99 NEW Tarams BASS5K 5000W Mono Channel Amplifier USA DEALER - SAME DAY SHIPPING $459.99 NEW Taramp's MD 1200.1 1 Ohm Class D 1200W USA DEALER - SAME DAY SHIPPING $189.99 TARAMP'S HD3000 1 OHM Amplifier Module USA DEALER - SAME DAY SHIPPING $239.99 RDCARSHOW HEAVY DUTY POWER CABLE SPEAKER (12FT) 4 CONDUCTOR + FREE FEMALE PLUG $34.99 NEW RDCARSHOW 18-PREDATOR 18″ 8-Ohm Subwoofer 4000W 45-1500Hz Response SUB $289.99 NEW XT AUDIO XT-75PLUS-VC DIAPHRAGM-CAR AUDIO-SOUND CAR $39.95 NEW RDCARSHOW RADIO BOX FOR 3,4,5,6 & 7 EQUALIZER AND 1 RADIO- QUALITY ACRYLIC $135.99 CHUCHERO FOR SPEAKER OF 6.5 INCHES +FREE CONNECTOR (RDCARSHOW) $69.99 CHUCHERO FOR SPEAKER OF 10 INCHES - TRADITIONAL STYLE FOR 2T-1D + SPEAKER CABLE $119.99 NEW XT AUDIO XT-75 PLUS 1000W COMPETITION DRIVER- CAR AUDIO-SOUND CAR $134.99 A3S AUDIO EQ6AP 6-CHANNEL ANALOG SIGNAL PROCESSOR, EQ AND CROSSOVER (RDCARSHOW) $159.95 RDCARSHOW 1 IN 5 WAYS OUT WAY POWER DISTRIBUTION BLOCK 0/2/4/8 GAUGE CAR AUDIO $13.10 HIPPO84V2 - 8" 500 Watts RMS Dual 4 Ohm Subwoofer 1000W PEAK $174.99 NEW MASSIVE AUDIO GTX124H - 12" 800 Watts RMS Dual 4 Ohm Subwoofer 1600W PEAK $179.99 CHUCHERO FOR SPEAKER OF 10" FOR 3 TWEETER - BRAZILIAN + FREE FEMALE CONNECTOR $119.95 MASSIVE AUDIO GTX104H - 10" 800 Watts RMS Dual 4 Ohm Subwoofer 1600W MAX $159.99 TARAMPS AUTOMOTIVE DIGITAL VOLTMETER AND SEQUENCER VTS 5.1 $59.99 RDCARSHOW RD-DM4000 4000 WATT MAX POWER DUAL 4 OHM COMPETITION CAR SUBWOOFER $299.99 NEW RDCARSHOW RD-111S HEAVY DUTY COMPETITION TWEETER 500 WATTS EXTREME SOUND $45.99 CHUCHERO FOR SPEAKER OF 12 INCHES - TRADITIONAL STYLE - (FREE CONNECTOR ) $99.95 Quick Links Home About Us New Arrivals Feedback Contact Us Categories Accesories Processor Speakers Amplifiers High Frequency Acoustic Boxes WE ACCEPT We accept PayPal and other major credit cards. RDCARSHOW © Copyright 2024. All rights reserved. Powered By 3Dsellers.com - Try for Free!

taramps bass 400 1 OHM V4

By |July 23rd, 2026|

Taramps Bass 15K Mono Car Audio Amplifier 15,000W RMS 1 Ohm MPN BASS 15K

By |July 23rd, 2026|

Taramps Bass 15K Mono Car Audio Amplifier 15,000W RMS 1 Ohm MPN BASS 15K

Taramps Bass 5k 1 Ohm bass 5000 Main Board Amplifier

By |July 23rd, 2026|

new replacement board for bass 5k. the amp is wrapped in anti static plastic to protect it. there is only one version of this amp. if you have a bass5k this board will fit your shell. no fans or side edges included