2Pack USB Rechargeable 9V Lithium Batteries 1300mAh Long Lasting LI-ion Battery
Capacity: 1300mAh. The build-in LED lights allow you to check the charging status.
Capacity: 1300mAh. The build-in LED lights allow you to check the charging status.
Capacity: 3500mWh / 2333mAh. Size: 50.5 14.6mm (Slightly longer than AA batteries without a protective plate). Input: Type-C 5V 2A. (The blue light at the positive pole of the battery is up when charging, and goes off when the battery is full).
EdisonBright EBR34 3400mAh Li-ion batteries 4 pack with Xtar MC1 USB powered charger.
Follow your device manufacturer’s battery guidelines. 🛡️ Advanced Safety Architecture. 🌡️Temperature Regulation — Monitors internal heat for safe operation.
Battery capacity: 1800mAH. Do you want the economical and greener lifestyles?. Except that, it features extensively long working life and high efficiency, great for use. Lightweight, compact and easy to carry.
Model Z22A / 3.8 Vdc/ 19.5 mAh Secondary (Rechargable) Li-ion battery miniRITE R / miniRITE T R
【 Widely Compatible 】 -Universal for cylindrical Li-ion batteries: 18650, 21700,26650, 22650, 18490, 16340 (RCR123), 14500, 10440 etc. 【 Special designed battery clamping structure 】 -Easy and Safe to load and unload battery.
2-bay Universal Cylindrical Li-ion Battery charger for 18650,16340,21700,etc. Features: 【Widely Compatible】-Universal for cylindrical Li-ion batteries: 18650, 21700,26650, 22650, 18490, 16340 (RCR123), 14500, 10440 etc. 【Special designed battery clamping structure】-Easy and Safe to load and unload battery 【Intelligent Control & Safety Guarantee】- Advanced MCU control, with low heating loss, over-heat and over-current protection, short-circuit protection 【USB Charger】-With mirco-USB and Type-C input, the battery charger powered by 5V-1A ~ 5v-2.4A USB input, easy to connect with cell phone charger adapter, power bank USB port, car charger adapter. 【Package Including】-1x Battery Charger; 1x Usb cable Universal Cylindrical Li-ion Battery charger Main Spec: Input DC5V-2.1A, 5V-1A , micro USB or Type-C pluginOutput: DC.2V-800mA x2 (max), 8W (max)Allow a single battery or 2 batteries in same size charging at a timeLED light: LED is red when in charging, blue when charging finish or unloadSize: 103mm* 5mm* 31mm (L*W*H) Working Conditions Keep in dry and dustless placeCharging Temperature Range: 0℃-5℃ (32℉- 113℉) Danger and Cautions Not suitable for charge LiFePO(LFP) rechargeable batteryNot suitable for charge NiMH rechargeable batterymay result in over-charging of LiFePO(LFP) and NiMH batteryAvoid reverse connection of batteryStop charging if the battery gives off odor, looks deformed, or in any wayappear abnormal ,immediately remove it from the chargerTake the batteries out from charger when charging completedKeep the charger and battery away from heat source such as fire or heaterwet ,dusty places, at least 1 meter away from combustible materialsDo not use power from laptop computer USB port rated lower than 5v-1ADisassembling the charger may cause damage and void the warrantyKeep the charger out of the reach of little children Certification: CE, FCC certificated, pass UL 0335 tests
WELCOME TO THE OFFICIAL TENERGY EBAY STORE BATTERIES Standard Rechargeable Batteries AA AAA C D 9V Combos/Kits ALL NICD (AA, C, D, & SUB C) Standard Lithium Rechargeables 18650/14500 CR123A (164340) 9V SIZE Standard LiFe Batteries SLA (Sealed Lead Acid) Non-Rechargeable / Primary Akaline (AA, AAA, C, D, 9V) Lithium CR123A, CR2, 1/2 AA Button Cells Tech / Single Cells (ALL) NIMH | Sub C, A/AF, F, more NICD | Sub C, AA,C, more Li-Ion Single Cells Li-PO Single Cells LiFe Single Cells Hobby Batteries Airsoft RC Cars Drones, Planes, Heli's For Products Power Tools Roomba Batteries Solar Garden Lights BATTERY PACKS Li-Ion Packs NiMH Packs Airsoft RC Cars Drones, Planes, Heli's CHARGERS For Standard Batteries For 18650 & RCR123A For Battery Packs NiMH/NiCD Packs Li-Ion/LiPO Packs LiFe Packs TOYS Quadcopters/Drones STEM HOME/ELECTRONICS LED Lighting Bluetooth Mobile Accessories Tenergy Li-ion 14500 Cylindrical 3.6V 800mAh Flat Top Rechargeable Battery Item #30001-0 3.6V 800mAh high capacity - 3 times the Voltage of AA NiMH or NiCd rechargeable batteries (1.2V). Higher energy density and lower weight than other rechargeable batteries. Ideal for building power packs (i.e., RC cars, planes, robots, etc.) with fewer cells needed than for NiMH or NiCd batteries. Manufactured under ISO9001-2000 to assure quality. Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality, and life-span. What's included in this listing? 1 x Tenergy Li-Ion 14500 Cylindrical 3.7V 800mAh Flat Top Rechargeable Battery Product Description --> Summarized Features and Benefits: Li-ion 14500 cylindrical AA size rechargeable battery 3.6V 800mAh high capacity - 3 times the Voltage of AA NiMH or NiCd rechargeable batteries (1.2V). Higher energy density and lower weight than other rechargeable batteries. Ideal for building power packs (i.e., RC cars, planes, robots, etc.) with fewer cells needed than for NiMH or NiCd batteries.. Manufactured under ISO9001-2000 to assure quality.. Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality, and life-span.. Applications: RC Applications, car, plane, etc Safety, Alarm, metering, power backup etc Building portable power device needing high energy density and low weight Technical Specifications Chemistry: Li-ion Nominal Voltage (V): 3.6V Capacity (mAh): 800 Max Continuous Discharge Current: 0.8A Weight: 20/22g(with tabs) Height: 49mm Diameter: 14.2mm Charge Cut-Off Voltage: 4.20 ± 0.05V End Voltage: 3.0V Internal Impedance: ≤ 70mΩ Warnings: By purchasing Lithium Polymer and Li-ion/LifeP04 battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider Nimh or NiCd battery or return the battery immediately before use. Under no circumstances should this battery be used with e-cigarette and flashlights. Li-ion/LifeP04 Batteries may explode if charged or discharged improperly. You must possess knowledge of electronic and understand how to handle Li-ion battery. We reserve the right not to sell and void the warranty it you don't meet the above statement. You must use a protection IC (PCB) to keep battery from overcharged and over-discharged Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You will solder to tabs instead directly onto the battery.
WELCOME TO THE OFFICIAL TENERGY EBAY STORE BATTERIES Standard Rechargeable Batteries AA AAA C D 9V Combos/Kits ALL NICD (AA, C, D, & SUB C) Standard Lithium Rechargeables 18650/14500 CR123A (164340) 9V SIZE Standard LiFe Batteries SLA (Sealed Lead Acid) Non-Rechargeable / Primary Akaline (AA, AAA, C, D, 9V) Lithium CR123A, CR2, 1/2 AA Button Cells Tech / Single Cells (ALL) NIMH | Sub C, A/AF, F, more NICD | Sub C, AA,C, more Li-Ion Single Cells Li-PO Single Cells LiFe Single Cells Hobby Batteries Airsoft RC Cars Drones, Planes, Heli's For Products Power Tools Roomba Batteries Solar Garden Lights BATTERY PACKS Li-Ion Packs NiMH Packs Airsoft RC Cars Drones, Planes, Heli's CHARGERS For Standard Batteries For 18650 & RCR123A For Battery Packs NiMH/NiCD Packs Li-Ion/LiPO Packs LiFe Packs TOYS Quadcopters/Drones STEM HOME/ELECTRONICS LED Lighting Bluetooth Mobile Accessories Tenergy Li-ion 14500 Cylindrical 3.6V 800mAh Flat Top Rechargeable Battery With or Without Tabs OPTION Li-ion 14500 cylindrical AA size rechargeable battery. 3.6V 800mAh high capacity - 3 times the Voltage of AA NiMH or NiCd rechargeable batteries (1.2V). Higher energy density and lower weight than other rechargeable batteries. Ideal for building power packs (i.e., RC cars, planes, robots, etc.) with fewer cells needed than for NiMH or NiCd batteries. Manufactured under ISO9001-2000 to assure quality. Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality, and life-span. FIXED SHIPPING COST - Buy more and Save! Options: Li-ion 14500 Cylindrical 3.6V 750mAh batteries (Flat Top - No Tabs) OR Li-ion 14500 Cylindrical 3.6V 750mAh batteries (Flat Top - w/ Tabs) Product Description --> Summarized Features and Benefits: Li-ion 14500 cylindrical AA size rechargeable battery 3.6V 800mAh high capacity - 3 times the Voltage of AA NiMH or NiCd rechargeable batteries (1.2V). Higher energy density and lower weight than other rechargeable batteries. Ideal for building power packs (i.e., RC cars, planes, robots, etc.) with fewer cells needed than for NiMH or NiCd batteries.. Manufactured under ISO9001-2000 to assure quality.. Battery tested based on International Electronic Commission (IEC) standard to ensure capacity, quality, and life-span.. Applications: RC Applications, car, plane, etc Safety, Alarm, metering, power backup etc Building portable power device needing high energy density and low weight Technical Specifications Chemistry: Li-ion Nominal Voltage (V): 3.6V Capacity (mAh): 800 Max Continuous Discharge Current: 0.8A Weight: 20/22g(with tabs) Height: 49mm Diameter: 14.2mm Charge Cut-Off Voltage: 4.20 ± 0.05V End Voltage: 3.0V Internal Impedance: ≤ 70mΩ Warnings: By purchasing Lithium Polymer and Li-ion/LifeP04 battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these conditions, please consider Nimh or NiCd battery or return the battery immediately before use. Under no circumstances should this battery be used with e-cigarette and flashlights. Li-ion/LifeP04 Batteries may explode if charged or discharged improperly. You must possess knowledge of electronic and understand how to handle Li-ion battery. We reserve the right not to sell and void the warranty it you don't meet the above statement. You must use a protection IC (PCB) to keep battery from overcharged and over-discharged Never solder directly onto the Li-ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You will solder to tabs instead directly onto the battery. Frequently Asked Questions How are the tabs added? A: They are spot welded. What is the difference between the No Tab and With Tabs version? We offer it without tabs to be used as a standalone battery or for those users who want to add their own tabs. What are the black plastic at the ends of the tabs? This is a protective cover added for shipping purposes, so the cells don't short during transit and handling. Users are to remove it before installation.