For TIMPANO AUDIO – Capital Tower

4x Timpano 1200 Watt Car Audio Bullet Tweeters TPT-ST3 BLACK 3.75″ Shallow 4 Ohm

By |2026-07-23T14:38:38+00:00July 23rd, 2026|

INCLUDES: 2x TPT-ST3 BLACK 3.75" Car Audio Super Bullet Tweeters - 1200 Watts Package - 600 Watts each pair (Sold in Pairs) Total of 4 units FEATURES:Timpano TPT-ST3 BLACK 3.75″ Car Audio Super Bullet Tweeters 600 Watts 4 Ohm – PairThese tweeters are capable of generating extremely loud volume you need to keep up in the high SPL environment. The aluminum diaphragm has been engineered to take the power needed to keep up and maintain crystal clarity.CRYSTAL CLEAR HIGHS: These tweeters are capable of generating extremely loud volume you need to keep up in the high SPL environmentBUILT IN CROSSOVER: A capacitor that eliminates out all low end frequencies that might otherwise harm the super tweetersSHALLOW PROFILE: Featuring a sleek PRO Audio faceplate Design this high performance 3.75 inch round tweeters, only have 1.59 inches of mounting depth.Engineered and designed in the USA by PRV Audio Group, the TPT-ST3 are car audio high compression bullet tweeters rated at 600 watts max peak power. Ready to deliver major concert sound to your sound system.Specs:600 Watts Max Power per pair / 300 Watts each200 Watts RMS Power per pair / 100 Watts eachImpedance: 4 Ohm each tweeterSensitivity: 105 dBFrequency Response: 2,000 – 22,000HzAluminum Diaphragm with a 1″ voice coilReplacement Diaphragm: TPT-RPST3Recommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter7500 Hz under 150 Watts of Amplifier RMS Power with 18dB Slope6000 Hz under 100 Watts of Amplifier RMS Power with 12dB SlopeSizing:Mounting Depth: 1.59”Mounting Cutout Diameter: 2.87″ + TerminalsOverall Size: 3.75′ diameter x 1.80″ HeightWeight: 1.32 Lbs each tweeterAccessories Included:3x Mounting ScrewsCapacitor attached per tweeter1x Timpano Logo StickerQuantity: 2 pieces (1 pair)

(2) 2″ NEODYMIUM TITANIUM DRIVER TIMPANO 200W TPT-D3200TI-ND 8Ω PRO AUDIO – PAIR

By |2026-07-23T04:04:27+00:00July 23rd, 2026|

INCLUDES: 2x TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Drivers Description TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver For a high output compression driver to be used for the critical mid range high (vocals), choose Timpano’s D3200TI-ND titanium compression driver. A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds. Recommended High Pass Filter – 1600 Hz at 12dB / Octave Crossover Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible. When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range. The high energy motor is also response for output up to 110 dB with only one watt of input power. Designed and Engineered by PRV Audio Group. Replacement Diaphragm are available at TPT-RPD3200TI-ND Timpano Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use. Technical Details GENERAL SPECIFICATIONS Neodymium Titanium Driver 200 Watts Continuous Power 100 Watts RMS Power Impedance: 8 Ohms Sensitivity: 110 dB Frequency Response: 1600Hz – 19000Hz 2″ Exit Throat Diameter 3″ Voice Coil Titanium Diaphragm Weight: 3.92 Lbs (1.78 Kg)