For RAM – Page 3 – Capital Tower

RAM Mount Plastic Arm with 1″ B-Ball and Button Socket RAP-B-200-1U

By |2026-07-22T09:42:08+00:00July 22nd, 2026|

Manufacturer Description MOUNT TYPE 1" dia. Ball Socket and Octagon Button Socket Plastic Arm. PART DESIGN The arm has a socket at one end to allow a 1" dia ball accessories to be connected and the other is for the Plastic Octagon Button. A tightening screw on the side of the arm enables the sockets to clamp firmly on the ball and the button. When loosening the side screw, the ball easily removes from the socket, but he arm must be disassembled to remove a octagon button from the socket.

RAM Mount Composite Plastic Rectangular AMPS Plate with 1 inch B-Ball RAP-B-347U

By |2026-07-23T16:16:38+00:00July 22nd, 2026|

Manufacturer Description The RAP-B-347 High Strength Plastic Composite Universal Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a Rectangular Plate. The plate has pre-cast holes in each corner making the universal AMPS hole pattern. If required, the different hole pattern allows you to connect this plate to almost any type of existing hole pattern.

RAM Mount Plastic 1.5” Ball 4.63″ Double Socket Medium Sized Arm RAP-201U

By |2026-07-22T09:42:06+00:00July 22nd, 2026|

Manufacturer Description The High Strength Plastic Standard 4.63" Double Socket Arm has a socket at either end to allow a 1.5" diameter ball accessories to be connected. A tightening screw on the side of the arm enables the sockets to clamp firmly to a RAM 1.5" diameter ball. When loosening the side screw, a single spring inside the arm opens the sockets allowing you to pivot the ball and socket connection or completely disconnect the ball from the socket. The arm length is 4.63" when measured from socket center to socket center.

RAM Mount Plastic Standard Arm with 1 inch and 1.5 inch Socket RAP-BC-201U

By |2026-07-23T22:09:17+00:00July 22nd, 2026|

Manufacturer DescriptionThe High Strength Double Socket Plastic Arm has a 1.5" dia. Ball Socket at one end and a 1.0" Socket at the other.This combination arm allows a 1.5" dia ball accessories to be connected at one end and the other end has a socket for a 1.0" dia ball accessory.A tightening screw on the side of both arms enables the sockets to clamp firmly to the rubber ball accessories. When loosening the side screw on either arm, the corresponding ball easily removes from the socket if required.What's Included In The Box?The RAM Mount Plastic Standard Arm with 1 inch and 1.5 inch Socket ships with the following items included:RAM Mount Plastic Arm with Ball and Button SocketRAM Mount Double Octagon ButtonRAM Mount Plastic 1.5 inch Socket and Button Arm

RAM Mount PVC Pipe Socket with Octagon Button End RAP-276U

By |2026-07-22T07:43:01+00:00July 22nd, 2026|