1piece Headband Cushion Hook. 7-Port HDMI Switch 2.0 4K@60Hz 7x1 HDMI 2.0 Switcher With IR Remote Support HDR. 1080P HDMI Converter HDMI to SPDIF Optical 4K RCA L/R Analog Audio Extractor J. DSM2/DSMX F701 2.4GHz 7 Receiver For DX8 DX7 JR RC Spektrum DSMX TRansmitter h.
Upgrade your Audio-Technica cartridge with this high-quality replacement stylus. diamond with aluminum tube, this needle is designed for maximum durability and precision. It is compatible with Audio-Technica models AT91R, At3600l and many others. . It is easy to install and use Same day Fast N FREE shipping in usa
Tip: 3 mil genuine diamond FOR 78 RPM ONLY. NOT for 33, 45 RPM.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell. _x000D_ _x000D_ This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws â no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Manufactured to Audio-Technica's renowned quality standards, each cartridge is meticulously assembled with remarkably tight tolerances. _x000D_ _x000D_ The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum for accurate playback both for DJs and causal listeners. A finger lift enables simple, precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws for connecting the headshell to a cartridge. _x000D_ _x000D_ Specifications: _x000D_ • Frequency response: 20-22,000 Hz _x000D_ • Channel separation: 20 (dB at 1 kHz) _x000D_ • Vertical tracking angle: 23° _x000D_ • Vertical tracking force: 1.8-2.2 g (2.0 g standard) _x000D_ • Stylus construction: Bonded round shank _x000D_ • Recommended load impedance: 47,000 ohms _x000D_ • Coil impedance: 3.3 k ohms (1 kHz) _x000D_ • DC resistance: 485 ohms _x000D_ • Coil inductance: 550 mH (1 kHz) _x000D_ • Load capacitance: 100 to 200 pF _x000D_ • Output: 4.0 mV (1 kHz, 5 cm/sec.) _x000D_ • Channel balance: 2.0 dB (1 kHz) _x000D_ • Stylus shape: 0.3 x 0.7 mil elliptical _x000D_ • Cantilever: Aluminum pipe _x000D_ • Mount: Half-inch _x000D_ • Replacement stylus: AT-VMN95C _x000D_ • Accessories included: Two 11 mm installation screws, two 8 mm installation screws, two washers _x000D_ • Dimensions: 21.2 mm (0.83") H à 21.4 mm (0.84") W à 62.4 mm (2.46") D _x000D_ • Weight: 15.5 g (0.55 oz)
The transparent design allows easy inspection while adding a modern touch to your record player. Easy to install, no complicated tools required—just plug and play. Ideal for vinyl enthusiasts who value clear, balanced audio performance.
Be careful! Compare your old needle to the picture before making a purchase. Need help? Attach a picture of your old needle to an ebay message to me and I will find your needle. Brand new in box diamond replacement needle for Audio Technica cartridges. Replaces the following needles: AUDIO TECHNICA ATN-102P, ATN102P, AUDIO TECHNICA ATN-102EP, ATN102EP, AUDIO TECHNICA 422EP, AKAI RS-3, AKAI RS3, AKAI RS-7, AKAI RS7, REALISTIC RT1500, REALISTIC 42-2776, REALISTIC 970-1095, REALISTIC 420-2850, REALISTIC 970-1351, REALISTIC 420-2901, RADIO SHACK RT1500, RADIO SHACK 42-2776, RADIO SHACK 970-1095, RADIO SHACK 420-2850, RADIO SHACK 970-1351, RADIO SHACK 420-2901, PANASONIC EPS-90SMAD, PANASONIC EPS-90STEG, EV PM2311DE, HITACHI DS-ST13, HITACHI DS-ST33, OTHERS. Used in the following cartridges: AUDIO TECHNICA AT102EP, AUDIO TECHNICA AT102P, AUDIO TECHNICA AT102EP, AUDIO TECHNICA AT102P,AUDIO TECHNICA PM9000, AUDIO TECHNICA I-LT, AUDIO TECHNICA 20E/U, AUDIO TECHNICA 100E/U, AUDIO TECHNICA AT97E, AUDIO TECHNICA AT190EP, AUDIO TECHNICA AT402EP, AUDIO TECHNICA P101E, AUDIO TECHNICA PM7000, AUDIO TECHNICA SLT88E, AUDIO TECHNICA SS315E/U, AUDIO TECHNICA SS330E/U, AUDIO TECHNICA TC150EP, AUDIO TECHNICA TR445U, AUDIO TECHNICA TR450E/LT, HITACHI MT-13, HITACHI MT-33, HITACHI MT13, HITACHI MT33, PANASONIC EPC-90, PANASONIC EPC90, EPC-90, RCA DIMENSIA COMPONENTS MTT-130 AND MANY OTHERS. 212 Be careful! Compare your old needle to the picture before making a purchase. USED IN THE FOLLOWING RADIO SHACK REALISTIC TURNTABLE MODELS: REALISTIC LAB 85, REALISTIC LAB 1500, REALISTIC LAB 1600, REALISTIC LAB 2000, REALISTIC LAB 2100, RADIO SHACK LAB 85, RADIO SHACK LAB 1500, RADIO SHACK LAB 1600, RADIO SHACK LAB 2000, RADIO SHACK LAB 2100, .6 MIL DIAMOND TIP PLAYS 33 AND 45 RPM RECORDS. 2 TO 4 GRAMS FORCE. Search my store for your needle, cartridge or other turntable accessories. Email me for help.Delivery confirmation in the United States is included in the shipping price. The confirmation number will be sent to the buyer when the item/items ship, usually within 24 hours.
AUDIO TECHNICA AT130E, AUDIO TECHNICA AT140LC, AUDIO TECHNICA AT155LC, AUDIO TECHNICA AT150E. AUDIO TECHNICA ATN-125LC, AUDIO TECHNICA ATN-135E, AUDIO TECHNICA ATN-140LC. AUDIO TECHNICA ATN-140ML, AUDIO TECHNICA ATN-150E, AUDIO TECHNICA ATN-155LC.
Up for sale is a4213-D6 TURNTABLE NEEDLE STYLUS for Audio Technica ATN3472P, 3482P, AT3472P. - Diamond Tip.
This VM95 Series styli with 0.6 mil conical stylus replacement for the AT-VM95 series. _x000D_ It also offers excellent channel separation and low distortion for outstanding tonal quality And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. _x000D_ _x000D_ Specifications: _x000D_ • Frequency response: 20-20,000 Hz _x000D_ • Channel separation: 18 (dB at 1 kHz) _x000D_ • Stylus construction: Bonded round shank _x000D_ • Recommended load impedance: 47,000 ohms _x000D_ • Coil impedance: 3.3 k ohms (1 kHz) _x000D_ • DC resistance: 485 ohms _x000D_ • Coil inductance: 550 mH (1 kHz) _x000D_ • Load capacitance: 100 to 200 pF _x000D_ • Output: 4.0 mV (1 kHz, 5 cm/sec.) _x000D_ • Channel balance: 2.5 dB (1 kHz) _x000D_ • Stylus shape: 0.6 mil conical _x000D_ • Cantilever: Aluminum pipe