Buyer – Page 292 – Capital Tower

Replacement 80-10m element section for the UJM-EFHW-80-10 1kW (Not 200W) antenna

By |2026-07-23T09:35:08+00:00July 22nd, 2026|

Replacement wire for UJM-80-10-1kW+ antenna. Includes coil, clamp and insulator and soldered connector as shown. Does not include the clamp for attaching the element to the box because you should already have that. Approx 130' long. This is the element only and not the complete antenna. This listing is meant as a replacement for the UJM-EFHW-80-10-1kW+ antenna. This is not the element for the 200W antenna version. If you own the UJM-EFHW-40-10-1kW+ antenna, this tuned element is a direct swap for your 40-10m unit to gain 80 meters as well. Length of this element is approximately 130 feet long. This tuned element is made with the same material used in my complete antenna. MARINE fully tinned16AWG insulated stranded copper element wire with stainless hardware and UV insulator. Marine wire is tough and made for harsh environments

SCANSTRUT ROKK WIRELESS NANO 10W WATERPROOF 12/24 V CHARGER

By |2026-07-22T21:32:59+00:00July 22nd, 2026|

ROKK Wireless Nano 10W Waterproof 12/24V Charger Dock. Charge. Connect. Nano 10W is our smallest wireless phone charging mount. It squeezes big features into a tiny package! Designed to be installed where space is at a premium, Nano 10W holds and wirelessly charges your phone at the same time! The ultra-compact design can be installed and used in any orientation, unlocking new charging possibilities. Now you can keep your phone within reach, charged, and ready to go. The IPX6 waterproof, 12/24V wireless range enables phone charging for the outdoor environment, without the need for cables. Designed from the ground up, this is the world’s first waterproof wireless charge system created specifically for use onboard. Perfect for boat consoles or any vehicle working outside in the elements, Nano 10W has been designed to fit even the largest phones. Nano 10W features Qi-certified wireless charging technology with foreign object detection and thermal cut-off to guarantee your devices are kept safe and charged while onboard. The upgraded 10W chargers are up to 60% faster and have been designed for the latest generation of power-hungry devices and apps. Nano 10W is compatible with all wireless charging-enabled phones of all sizes from all major brands. Charging is also possible through non-metallic, waterproof cases. Usage Nano 10W is at home in coastal and freshwater. If you require a wireless phone charging mount for rough conditions, we recommend our ROKK Wireless – Active 10W or Edge 10W. Testing ROKK Wireless Nano has been subjected to a high level of environmental, vibration, impact and on-water testing programs. This is combined with our world-renowned expertise in waterproofing technologies, UV stabilization techniques and premium-grade materials, ensuring Nano 10W is up to the challenge of life outdoors. Installation Installation is simple on any boat, RV, ATV or outdoor location. Four screws secure the unit onto any flat surface with a simple installation guide and drilling template. For the best phone grip performance, a vertical installation is recommended. The charger is easy to clean and can be washed down with fresh water. Features:10W Fast ChargingIPX6 WaterproofQi CertifiedMount & chargeOutdoor-ready grip

12″ Mega Roll Subwoofer Cone Red Stitching 3″ VCID Foam Surround CN1236RS

By |2026-07-22T21:32:59+00:00July 22nd, 2026|

12" Mega Roll Subwoofer Cone 3" VCIDCone body Material: Non pressed Kraft PulpSurround Material: Foam/red stitching Cone Height: 2.244″ (57mm)Outer Diameter: 12″ (305mm)Surround Height: 1.417″ (38mm)Surround Width: 1.653″ (42mm)Voice Coil Opening: 3.07″ (77.70mm)Cone Mass: 176 gramsDust Cap Notch: N/A

JL Audio 10W3v2 Subwoofer Refoam Kit – Speaker Repair – 1 Foam w/ Shims

By |2026-07-22T21:32:58+00:00July 22nd, 2026|

JL Audio 10" Refoam Kit (Single Foam Surround) This kit will fit 10W0, 10W1, 10W6 and 10W3v2. This will NOT fit all the version 2's. Check measurements below. This Refoam Kit includes all the materials needed to repair one (1) subwoofer: Refoaming Instructions 1 Foam Surround (F10-11) Tall Shims for centering the 2" voice coil 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky for poly cones) You will need to carefully remove the original dust cap to shim the voice coil and reglue it back down when repair is complete. *It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. A - Outside diameter of the surround : 9.625" B - Roll ends : 9" C - Outside diameter of the cone : 7.625" D - Inside diameter of the surround : 7.125" FAST FREE SHIPPING IS WITHIN THE UNITED STATES ONLY. INTERNATIONAL SHIPPING WELCOME!!! Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms. PLEASE READ: We can ship Internationally using USPS First Class or Priority Mail. USPS Priority Mail International includes tracking and insurance. USPS First Class International has limited tracking, NO insurance and is slower. Depending on your country's customs some orders may take over 30-45 days.

JL Audio 10W0 10W1 10W6 Subwoofer Refoam Kit – 3 Foams w/Shims

By |2026-07-22T21:32:57+00:00July 22nd, 2026|

JL Audio 10" Triple Refoam Kit This kit will fit 10W0, 10W1, 10W6 and 10W3v2. This will NOT fit all the version 2's. Check measurements below. Each Refoam Kit includes all the materials needed to repair three (3) subwoofers: Refoaming Instructions 3 Foam Surrounds (F10-11) Tall Shims For Centering The 2" Voice Coils 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky to bond on poly cones) You will need to carefully remove the original dust cap to shim the voice coil and reglue it back down when repair is complete. *It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. A - Outside diameter of the surround : 9.625" B - Roll ends : 9" C - Outside diameter of the cone : 7.625" D - Inside diameter of the surround : 7.125" FAST FREE SHIPPING IS WITHIN THE UNITED STATES ONLY. INTERNATIONAL SHIPPING WELCOME!!! Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms. PLEASE READ: We can ship Internationally using USPS First Class or Priority Mail. USPS Priority Mail International includes tracking and insurance. USPS First Class International has limited tracking, NO insurance and is slower. Depending on your country's customs some orders may take over 30-45 days.

JL Audio 10W0 10W1 10W6 Subwoofer Refoam Kit – 2 Foams w/ Shims

By |2026-07-22T21:32:56+00:00July 22nd, 2026|

JL Audio 10" Refoam Kit This kit will fit 10W0, 10W1, 10W6 and 10W3v2. This will NOT fit all the version 2's. Check measurements below. Each Refoam Kit includes all the materials needed to repair two (2) woofers: Refoaming Instructions 2 Foam Surrounds (F10-11) Tall Shims for centering the 2" voice coils 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky to bond on poly cones) You will need to carefully remove the original dust cap to shim the voice coil and reglue it back down when repair is complete. *It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. A - Outside diameter of the surround : 9.625" B - Roll ends : 9" C - Outside diameter of the cone : 7.625" D - Inside diameter of the surround : 7.125" FAST FREE SHIPPING IS WITHIN THE UNITED STATES ONLY. INTERNATIONAL SHIPPING WELCOME!!! Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms. PLEASE READ: We can ship Internationally using USPS First Class or Priority Mail. USPS Priority Mail International includes tracking and insurance. USPS First Class International has limited tracking, NO insurance and is slower. Depending on your country's customs some orders may take over 30-45 days.

JL Audio 10W7 10″ Subwoofer foam Surround Repair Kit Refoam

By |2026-07-22T21:32:55+00:00July 22nd, 2026|

10" JL Audio 10W7 Foam KitFits the following models: 10W7, 10W7AE, 10W7-3 and 10W7AE-3Kit includes:One 10” foam surroundOne bottle of pro grade black rubber adhesive Foam Dimensions: Outer diameter: 10.5" (266.7m) Roll outer diameter: 10.375" (263.5mm) Cone diameter: 7.375" (187.3mm) Inner diameter: 6.75" (171.5mm) Surround roll width: 1.5" (38.1mm) Inner attachment: Flat

JL Audio 10W3 10W3v2 Subwoofer Refoam Kit – Speaker Repair – 2 Foams w/ Shims

By |2026-07-22T21:32:55+00:00July 22nd, 2026|

JL Audio 10" Refoam Kit This kit will fit 10W0, 10W1, 10W3, 10W3v2 and 10W6. This will NOT fit all the version 2's, only the 10W3v2. Check measurements below. Each Refoam Kit includes all the materials needed to repair two (2) woofers: Refoaming Instructions 2 Foam Surrounds (F10-11) Tall Shims for centering the 2" voice coils 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky to bond on poly cones) You will need to carefully remove the original dust cap to shim the voice coil and reglue it back down when repair is complete. *It can be difficult to refoam a speaker without removing the dust cap and inserting the plastic shims. The plastic shims are used to center the voice coil and cone assembly while the speaker is being refoamed. If you do not use the plastic shims, the voice coil may be off center and it may lead to the voice coil rubbing. A - Outside diameter of the surround : 9.625" B - Roll ends : 9" C - Outside diameter of the cone : 7.625" D - Inside diameter of the surround : 7.125" FAST FREE SHIPPING IS WITHIN THE UNITED STATES ONLY. INTERNATIONAL SHIPPING WELCOME!!! Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms. PLEASE READ: We can ship Internationally using USPS First Class or Priority Mail. USPS Priority Mail International includes tracking and insurance. USPS First Class International has limited tracking, NO insurance and is slower. Depending on your country's customs some orders may take over 45 days.

2 JL Audio Foam Surround Repair Kit For 10W0, 10W1,10W6 10W3, 10W3v2, 10W4, 10w8

By |2026-07-22T21:32:54+00:00July 22nd, 2026|

10" JL Audio Foam KitFits the following models: 10W0, 10W1v2-4, 10W3, 10W3v2, 10W4, 10W6, 10W8, 1010, 10-W and others with same measurements***This kit will not fit 10W6V2 10W6V3***Kit includes:Two 10” foam surroundsOne bottle of premium pro grade black rubber adhesive Foam Dimensions:Outer diameter: 9.625" (244.5m) Roll outer diameter: 9" (228.6mm) Cone diameter: 7.625" (193.7mm)Inner diameter: 7.125" (181mm) Surround roll width: 0.75" (19mm) Inner attachment: Flat

JL Audio 10W7 10W7AE 10″ Subwoofer Refoam Repair Kit – 1 Single Foam w/ Glue

By |2026-07-22T21:32:53+00:00July 22nd, 2026|

JL Audio 10" Refoam Kit for the JL 10W7 (Single Foam Surround) This kit will fit 10W7 and 10W7AE models ONLY! This Refoam Kit includes all the materials needed to repair one (1) subwoofer: Refoaming Instructions 1 Foam Surround (F10-14) 1 Bottle of Specially Formulated Foam Surround Adhesive (strong and sticky for poly cones) *We recommend hand centering this subwoofer when replacing the foam surround. When the glue is still tacky you can move the cone up and down. If you feel or hear the voice coil rubbing, just keep moving the cone assembly until it is free of rubbing. FAST FREE SHIPPING IS WITHIN THE UNITED STATES ONLY. INTERNATIONAL SHIPPING WELCOME!!! Our shipping costs do not include your country's customs charges, taxes and other fees. Please do NOT ask us to send as a gift or to lower the declared value on the customs forms. PLEASE READ: We can ship Internationally using USPS First Class or Priority Mail. USPS Priority Mail International includes tracking and insurance. USPS First Class International has limited tracking, NO insurance and is slower. Depending on your country's customs some orders may take over 30-45 days.

Previous 290 291292293 294 Next