8.4″ Replacement 17-23 Uconnect 4C UAQ LCD Display Touch Screen Radio Navigation
17-23 Replacement 8.4" Uconnect 4C UAQ LCD Display Touch Screen Radio Navigation US PLEASE NOTE THAT WE HAND TEST EACH SCREEN ONE BY ONE IN HOUSE RIGHT BEFORE IT SHIPS TO VERIFY QUALITY AND FUNCTIONALITY SO PLEASE BUY WITH CONFIDENCE. OTHER SELLERS DO NOT TEST THEIR SCREENS. PLEASE NOTE THAT THIS IS A LCD TOUCH SCREEN WITH DIGITIZER, NOT A WHOLE RADIO! LA084X01(SL)(01) /LA084X01 (SL) (02) /LA084X01 (SL) (03) please check and make sure that this is for your radio just because your car is on this list it don't mean it is made for your radio It is strongly recommended to find professional installation, non-professional installation may cause irreversible damage ever car has about 5 different radio models just because it looks like your radio it does not mean it will fit a lot of car company's use different radio company's to make there radios This replacement part is specifically for the Uconnect 4 , 4C , UAQ , UAS with 8.4 inch Touch Screen radios WITH GPS NAVIGATION AND NON NAVIGATION FITMENT: PLEASE MAKE SURE YOU MATCH UP THE SCREENS AND PART NUMBERS PRIOR TO PURCHASING. IF YOU ARE NOT SURE PLEASE SEND US A MESSAGE. For 2018-2020 Jeep Grand Cherokee Summit Limited Trailhawk SRT & Cherokee For 2018-2020 RAM 1500 2500 3500 Chassis Cab For 2017-2020 Chrysler 200 300 For 2017-2020 Dodge Challenger For 2018-2020 Dodge Durango For 2017-2020 CHARGER For 2018-2020 JEEP WRANGLER For 2018-2020 JEEP COMPASS For 2019-2020 JEEP GLADIATOR Warn:Please double check the size and pin! ! ! In order to avoid unnecessary trouble between us, please compare our photos with the original parts of your car when purchasing, and confirm that the item is suitable for your car! 1. Please ensure the part of your car like our picture shows, or it will not fit, if any differeces, please contact with us before purchase, thanks. 2. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank you. 3. Excluding installation instructions, professional installation is recommended Package Included: 1PCS x LCD Touch Screen Display
JL AUDIO JD1000/1 1000W RMS JD Series Monoblock Class D Subwoofer Amplifier
JD1000/1D - JL Audio Monoblock 1000W RMS 2000W Max Class D Amplifier Product highlights: mono subwoofer amplifier 600 watts RMS x 1 at 4 ohms 1000 watts RMS x 1 at 2 ohms Class D amp design with NexD™ switching technology frequency response: 7-500 Hz variable low-pass filter (50-500 Hz, 12 dB/octave) variable bass boost (0-12 dB at 45 Hz)
JL Audio 10W7AE ported sub box SPECIAL EDITION with black plexi port trim
Finding a really good box for a JL Audio W7 subwoofer can be hard. With so many choices, how can you make a good decision?It simply comes down to three things.A box that is built to lastA box that sounds as it shouldA box that looks as good as it sounds.What do you get when you buy a box from AV Priority?You get a box that is cut out of doubled refined Trupan Plus MDF using modern CNC machinery which provides a superior box that will last for many years.All of our designs use specs that we take right from JL Audio's recommendations for each speaker. This assures you of a box that not only sounds the way it was designed to sound but also will give you the most life from your W7 subwoofer.All of our special edition boxes for W7 subwoofers have the following features giving you a beautiful enclosure.FEATURES:Internal bracing used to strengthen the panels of the box, anytime you can eliminate panel flexing in a box you gain output from power that would otherwise be wasted.Plexiglas port trim plate with W7 logo in black with a backer color in white. This really gives the box a custom look.All of our special edition W7 boxes now come with high quality 10-24 threaded inserts built into the baffle and include the mounting screws as well. Now you can feel confident when you bolt the speaker into the baffle using machines screws. This enables you to remove the sub for inspection or any other reason as many times as needed without ever compromising the integrity of the baffle.We use 1" baffles on our W7 enclosures. You may see others with thicker baffles, but here is the reason why we will not ever use a baffle thicker than 1" When you use a thicker baffle it actually chokes off proper air flow from around the back of the speaker basket. this is detrimental to the way subwoofers are designed to work. Plus our 1" baffle with the threaded inserts clamps the speaker to the baffle becoming basically one piece. The total net internal volume is 1.5 cuft. Built to JL specs, tuned to 35.3Hz. This net volume is arrived at after taking into account the displacement of the subwoofer. Specs are as follows: 27" wide, 13.5" high, and 13.5" deep. Weight: 39 lbs. The box comes complete with a recessed high quality binding post terminal cup that accepts up to 8 ga. wire. 12 gauge OFC wire is provided inside the box. I offer the box in the following colors:BlackCharcoal Gray(please specify your choice upon purchase in the paypal note area or you can send me a message through ebay messages after you purchase) You spent quite a bit of money on a great subwoofer, this box will provide you with the right solution to get the best performance out of your W7 Don't take our word for it, look what others say in our feedback comments.Thank you for your interest!SPEAKER NOT INCLUDED!!
JL Audio M6-8IB-C-GwGw-i-4 8″ Marine Subwoofer with Classic Grille W/ LED RGB
This JL Audio M6 Series 8" marine subwoofer reflects JL Audio's commitment to awesome sound, cutting-edge styling, and quality engineering. The built-in LED lighting looks terrific and brightens any nighttime cruise, and you can choose the grille style and color that's right for your boat's interior.Handles up to 200 watts RMSThis rugged sub can really rock, with a massive magnet and heavy-duty componentry that can handle up to 200 watts RMS. It's tough, too, with a sealed waterproof front and the stylish, UV-resistant grille of your choice. Add it to your existing system, or use it in conjunction with JL Audio's marine speakers to create a powerful sound system that will really rock the waves.The motor structure allows for extended cone movement, so your bass will be loud and low, yet precise and smooth. This versatile sub works in sealed or ported enclosures, but it's optimized for infinite baffle (free air) operation, so you can mount it directly into a bulkhead if there's no space for a box.The coolest cones aroundAny sub with built-in lighting is cool enough, but JL Audio M6 models are something special. The unique Transflective™ cone is designed to glow evenly when the LEDs shine through) and reflect light (the cone looks silver when the lights aren't in use), so your sub will look awesome whether the lights are on or off.The LEDs themselves are mounted to the speaker's frame and illuminate the cone from underneath. This very smart bit of engineering ensures smooth, vibrant light without the “hot spots” you'd notice on lesser LED speakers. It sounds like a subtle difference, but when you see them lit up, you'll understand what a huge improvement this is. You can choose from a variety of fixed lighting colors or control the color and intensity of the lighting with the MLC-RW RGB LED Controller (sold separately).Built for life on the waterBuilt from the ground up for the marine environment, this rugged subwoofer sports a corrosion-resistant polymer basket that surrounds the internal structure for extra protection. The marine-grade synthetic fiber spider, injection-molded polypropylene cone, and synthetic rubber surround provide outstanding performance, while shrugging off the corrosive effects of sun, salt, and moisture. The UV-resistant grille will stay factory-fresh even after years of outdoor exposure.Serial Numbers Are Recorded and Photographed Per Each Customer Order. Any product returned for any reason Must be returned in its original and serial number matching box / packaging. Product highlights:8" 4-ohm marine subwoofer with RGB LED lightinginjection-molded mica-filled polypropylene woofer with synthetic rubber surroundtransflective cone for even glow when lit, appears silver with lighting offpolymer basket and grille, with stainless steel back platemarine-grade brass binding postsmarine-grade synthetic fiber spiderhandles up to 200 watts RMSsensitivity: 86.8 dBtop-mount depth: 5-1/16"cutout diameter: 7-3/8"Return for Refund All returns must be new, unused and/ or unopened in original serial number matching packaging including screws, hardware, knobs, plastic coverings, protective films, serial numbers, tags, stickers, and other manufacturer labels not removed or tampered with etc. A 20% restocking fee may be deducted from return refunds. Returned merchandise that is either opened, used or missing items will be issued up to a 50% partial refund. The retail box cannot be used as a shipping box.Serial numbers must match serial numbers shipped along with matching serial number packaging, merchandise is photographed with serial number per purchase and recorded for our records, items returned back to us that were not purchased from us will not be refunded or warrantied.A traceable and insured shipping method is strongly recommended, we are not responsible for merchandise that has not reached our facility.If you do not see something you expect to be included in the description we provide, it will not be included.Speakers, Tweeters, and Subwoofers with burnt/ frozen coils are not warrantiedAmplifiers that are returned and deemed defective from improper installation or use are not warrantiedShipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.
JL Audio M200/2 2-channel marine amplifier 75 watts RMS x 2 200 Watts Bridged
JL Audio M200/2 2 Channel Marine Amplifier 75 watts RMS x 2preamp-level inputspreamp outputs4-gauge power and ground leads recommended — wiring and hardware not included with amplifier6-7/8"W x 2-1/16"H x 7-1/8"D2-channel marine amplifier75 watts RMS x 2 at 4 ohms (100 watts RMS x 2 at 2 ohms)200 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)Class-D designwhite and gray powder-coat finishes, gasketed control cover, and stainless steel hardwarevariable high- and low-pass filters (50-500 Hz, 12 dB per octave)Bass Knob not included, sold separatelyThe item is in pristine, like-new condition. It has been professionally inspected, cleaned, and refurbished by the manufacturer or a manufacturer-approved vendor to meet manufacturer specifications. The item will be in brown packaging with original or new accessories.
JL Audio C1 6.5″ Component Car Speakers 150W & C1 4″ coaxial Speakers 105 Watts
Experience superior audio quality on the road with this bundle of JL Audio C1 6.5" Component Car Speakers (150W) and C1 4" Coaxial Speakers (105 Watts). Tailored for car audio enthusiasts, this set ensures a balanced, immersive sound, enhancing your in-car entertainment. The 6.5" component speakers deliver crisp, clear mid to high-range frequencies, while the 4" coaxial speakers ensure solid bass and full-range audio. Easy to install, these speakers are designed to blend seamlessly with your car's interior, making it a high-quality upgrade for your vehicle's sound system. Whether you're listening to music, podcasts, or taking calls on the go, this speaker set elevates your audio experience to a new level.JL Audio C1 Series 6-1/2" component speaker system component speaker system includes 2 woofers and 2 tweeters 6-1/2" injection-molded mineral-filled polypropylene woofer cone with rubber surround separate 3/4" aluminum edge-driven dome tweeter with in-line high pass filter handles up to 50 watts RMS (225 watts peak power) frequency response: 48-24,000 Hz sensitivity: 93 dB at 2.83 volts woofer top-mount depth: 2-1/16" grilles not included JL Audio C1 Series 4" 2-way car speakers 2-way 4" speakers (pair) injection-molded mineral-filled polypropylene woofer cone with rubber surround 3/4" aluminum edge-driven dome tweeter handles up to 35 watts RMS (105 watts peak power) frequency response: 64-24,000 Hz sensitivity: 87.5 dB at 2.83 volts top-mount depth: 1-7/8" grilles not included
JL Audio 12W7AE ported sub box SPECIAL EDITION with black plexi port trim
Finding a really good box for a JL Audio W7 subwoofer can be hard. With so many choices, how can you make a good decision?It simply comes down to three things.A box that is built to lastA box that sounds as it shouldA box that looks as good as it sounds.What do you get when you buy a box from AV Priority?You get a box that is cut out of doubled refined 3/4" Trupan Plus MDF using modern CNC machinery which provides a superior box that will last for many years.All of our designs use specs that we take right from JL Audio's recommendations for each speaker. This assures you of a box that not only sounds the way it was designed to sound but also will give you the most life from your W7 subwoofer.All of our special edition boxes for W7 subwoofers have the following features giving you a beautiful enclosure.FEATURES:Internal bracing used to strengthen the panels of the box, anytime you can eliminate panel flexing in a box you gain output from power that would otherwise be wasted.Plexiglas port trim plate with W7 logo, we offer the trim plates in either black, red or white with a backer color of either black red or white as well. This really gives the box a custom look.All of our special edition W7 boxes now come with high quality 10-24 threaded inserts built into the baffle and include the mounting screws as well. Now you can feel confident when you bolt the speaker into the baffle using machines screws. This enables you to remove the sub for inspection or any other reason as many times as needed without ever compromising the integrity of the baffle.We use 1" baffles on our W7 enclosures. You may see others with thicker baffles, but here is the reason why we will not ever use a baffle thicker than 1" When you use a thicker baffle it actually chokes off proper air flow from around the back of the speaker basket. this is detrimental to the way subwoofers are designed to work. Plus our 1" baffle with the threaded inserts clamps the speaker to the baffle becoming basically one piece. The total net internal volume is 1.75 cuft. Built to JL specs, tuned to 36.7Hz. This net volume is arrived at after taking into account the displacement of the subwoofer. Specs are as follows: 31.5" wide, 13.5" high, and 13.5" deep. Weight: 42 lbs. The box comes complete with a recessed high quality binding post terminal cup that accepts up to 8 ga. wire. 12 gauge OFC wire is provided inside the box. I offer the box in the following colors:BlackCharcoal Gray(please specify your choice upon purchase in the paypal note area or you can send me a message through ebay messages after you purchase) You spent quite a bit of money on a great subwoofer, this box will provide you with the right solution to get the best performance out of your W7 Don't take our word for it, look what others say in our feedback comments.Thank you for your interest!SPEAKER NOT INCLUDED!!
JL Audio M3-650X-C-Gw 6.5″ 2-Way Marine Coaxial Speakers – White Classic Grilles
JL Audio M3-650X-C-GW 6.5" Marine Speaker Pair The JL Audio M3-650X-C-Gw marine speakers are designed with durable materials and expert craftsmanship, providing optimal sound for your boat's cockpit or bulkhead walls. They can be mounted alone or paired with a subwoofer for even more impressive audio. Tough enough Equipped with ample power, these speakers are capable of conquering the challenging elements of wind, water, and engine noise. Their mica-filled polypropylene cone is weatherproof and rests in a durable synthetic rubber surround, allowing for extensive excursion and impressive sound quality. The polymer basket that encases the entire structure is UV-resistant for added protection. The 3/4" silk dome tweeters are treated to deliver brilliant highs. They are mounted directly to the classic-style grilles for optimal sound radiation. Even in rough waters, your favorite tunes will be accompanied by fine detail. Serial Numbers Are Recorded and Photographed Per Each Customer Order. Any product returned for any reason Must be returned in its original and serial number matching box / packaging. Product highlights:6-1/2" 2-way marine speakers (pair)injection-molded, mica-filled polypropylene woofer with synthetic rubber surround3/4" silk dome tweeterUV- and corrosion-resistant polymer baskets and grillesdesigned for free-air applications (no enclosures needed)for best performance, speaker needs at least 2 cubic feet of airspacehandles up to 60 watts RMS (225 watts peak power)frequency response: 55-25,000 Hzsensitivity: 89.5 dBimpedance: 4 ohmscutout diameter: 4.972"frame diameter: 6.91"mounting depth: 2.825"Return for Refund All returns must be new, unused and/ or unopened in original serial number matching packaging including screws, hardware, knobs, plastic coverings, protective films, serial numbers, tags, stickers, and other manufacturer labels not removed or tampered with etc. A 20% restocking fee may be deducted from return refunds. Returned merchandise that is either opened, used or missing items will be issued up to a 50% partial refund. The retail box cannot be used as a shipping box.Serial numbers must match serial numbers shipped along with matching serial number packaging, merchandise is photographed with serial number per purchase and recorded for our records, items returned back to us that were not purchased from us will not be refunded or warrantied.A traceable and insured shipping method is strongly recommended, we are not responsible for merchandise that has not reached our facility.If you do not see something you expect to be included in the description we provide, it will not be included.Speakers, Tweeters, and Subwoofers with burnt/ frozen coils are not warrantiedAmplifiers that are returned and deemed defective from improper installation or use are not warrantiedShipping & handling charges are non-refundable. All refunds will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS or USPS Rate deducted from their refund.
JL Audio 13W7 3.5″ D1 Ohm Voice Coil Subwoofer Speaker Parts 13W7-3 13W7AE
JL Audio 13W7 3.5" Dual 1 Ohm Flat Aluminum Voice CoilFits the following models: 13W7, 13W7-3, 13W7AE, 13W7AE-3Former Height: 5.79" (147.07mm)Winding Width: 2.8" (71.12mm) Outer Diameter: 3.708" (94.18mm)Inner Diameter: 3.53" (89.66mm)Impedance: Dual 1 OhmLayers: 4Former Material: KaptonWire Material / Type: Flat Aluminum