+ TECHNOLOGY + COMPACT + STETSOM. This amplifier combines high-level performance with exceptional sound quality, all in a compact and robust design. Introducing the HL2000.4, the latest audio amplifier in the HIGH LINE family!
⚠️ IMPORTANT NOTICE — MUST READ BEFORE BUYING Due to recent U.S. Customs policies, all shipments to the United States may incur import taxes of approximately 40%, charged directly by American customs authorities. These charges are not collected by us and are the responsibility of the buyer. TARAMPS MD 4000.1 – REAL POWER. ULTIMATE PERFORMANCE. The Taramps MD 4000.1 car audio amplifier is the perfect choice for those who demand true power and exceptional sound quality in car audio systems. With an output of 4000 Watts RMS , this high-performance monoblock amplifier delivers consistent performance across a wide full-range frequency response from 10Hz to 10kHz. Engineered for versatility, the MD 4000.
1 Stetsom Vulcan 8000 - 1 Ohm Digital Amplifier. - RMS Power: 8000W. - RMS Power at 1 Ohm 12.6V: 8000W. The VULCAN line was developed for car audio enthusiasts seeking maximum performance in full-range amplifiers.
INCLUDES 1x TPT-5000EQ at 1Ohm - Compact Class D Full Range Amplifier. Small Footprint Technology! Timpano amplifiers raise power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D full range amplifier. The TPT-5000EQ offers 1 channel with advanced individual equalization features for Bass, Mid Bass, and Mid High, plus the traditional Level, High Pass, and Low Pass features. Its Full Range frequency response from 10Hz to 15KHz allows the installation of Subwoofers, Woofers, Drivers, and Tweeters.Use the guide Below for recommended applications, where you can get the full potential of your amplifier. SPECIFICATIONS Number of Channels: 1RMS Power at 1 Ohm 12.6V: 5000W RMSRMS Power at 2 Ohm 12.6V: 2800W RMSRMS Power at 4 Ohm 12.6V: ——RMS Power at 1 Ohm 14.4V: 5600W RMSRMS Power at 2 Ohm 14.4V: 3400W RMSRMS Power at 4 Ohm 14.4V: ——Supply Voltage: 9.5 ~ 15VFrequency Response: 10Hz ~ 15KHzCrossover Low Pass: 50Hz ~ 15KHzCrossover High Pass: 10Hz ~ 700HzSignal to Noise: > 90 dBHarmonic Distortion: < 0.9 % THDInput Sensitivity: 0.2VInput Impedance: 26K OHMImpedance Output: 1 OHMConsumption with Signal Musical: 4.1A ~ 245AConsumption with Signal Bass: 4.1A ~ 490ADimensions (L x W x H): 11.57" x 12.20" x 3"Weight: 9 LbsBefore Installing:You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a 200A fuse 12 inches away from the battery as a safety precautionThe power rating data is based on equipment from the PRV Audio Group laboratory. Rated power tested with 100Hz to 1KHz sinusoidal signal and THD <= 10%, with resistant load referring to the indicated measurements. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant load ) is not recommended.
PRV Audio MDX2000.4 1 Ohm MINI 4 Channel Car Audio Amplifier 4 x 500 Watts RMS at 1 Ohm – Ultra Compact Stereo Amp. Its 1 Ohm channels allow you to install 16x 4 Ohm drivers or tweeters, 4 per channel in parallel, giving out 125 watts per component.
Taramps presents the MD 1200.1 amplifier, available in 1, 2 or 4 Ohms. It was carefully developed with the latest technology to offer excellent performance for the most varied automotive sound systems while covering the entire frequency range, in other words, it is FULL RANGE. This is a mono amplifier and has one channel with a maximum power of 1200 Watts RMS. Welcome to the sound world of Taramps. TECHNICAL INFORMATION1 OHM VERSIONNominal Power @12,6VDC1Ohm: 1200W RMS2Ohms: 1000W RMS4Ohms: N/A8Ohms: N/A2 OHMS VERSIONNominal Power @12,6VDC1Ohm: N/A2Ohms: 1200W RMS4Ohms: 800W RMS8Ohms: N/A4 OHMS VERSIONNominal Power @12,6VDC1Ohm: N/A2Ohms: N/A4Ohms: 1200W RMS8Ohms: 855W RMSNUMBER OF CHANNELS01INPUT SENSITIVITY220mVSIGNAL TO NOISE RATIO>88dBFREQUENCY RESPONSE10Hz ~ 20KHz (-3dB)CROSSOVER HIGH PASS (HPF)10Hz ~ 80Hz (-12dB/8ª) VariableCROSSOVER LOW PASS (LPF)80Hz ~ Full (-12dB/8ª) VariableBASS BOOST0 ~ 10.5dB (50Hz)THERMAL MANAGEMENTSmart Cooler (Cooler activates based on temperature or audio at 3 speeds)INPUT IMPEDANCE10K OHMSOUTPUT IMPEDANCE1 Ohm | 2 Ohms | 4 OhmsPROTECTION SYSTEMOutput short-circuit, high/low voltage and thermal protectionMINIMUM SUPPLY VOLTAGE9VDCMAXIMUM SUPPLY VOLTAGE16VDCCONSUMPTION AT REST1,8AMAXIMUM MUSIC CONSUMPTION60AMAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL119ADIMENSIONS (WXHXD)8.98" x 2.76" x 6.22" (228 x 70 x 158 mm)WEIGHT3.97 lb (1.80 Kg)EAN1 Ohm: 78985568448022 Ohms: 78985568446044 Ohms: 7898556844819
The BRAVO FULL line was developed for automotive sound lovers who seek maximum performance in FULL-RANGE amplifiers.Its frequency response from 10Hz to 12kHz offers audio quality and definition, and can be used with subwoofers, woofers, drivers, and tweeters.TECHNICAL SPECIFICATIONSCHARACTERISTICSBRAVO FULL 5000 – 1 OHMNumber of Channels1RMS Power5000W RMSRMS Power at 1 Ohm 12.6V5000W RMSRMS Power at 2 Ohm 12.6V2800W RMSRMS Power at 1 Ohm 14.4V5300W RMSRMS Power at 2 Ohm 14.4V3300W RMSFrequency Response10Hz ~ 12KHzCrossover Low Pass90Hz ~ 12KHzCrossover High Pass10Hz ~ 90HzSignal to Noise>90dBInput Sensitivity200mVInput Impedance12K OhmsImpedance Output1 OHMConsumption with Signal Musical242AConsumption with Signal Bass485ADimensions (H x W x D) mm80 x 231,5 x 333 mmWeight Kg4,25 Kg
INCLUDES: 1X TPT-BASS3000 1 Ohm - Bass Car Audio Amplifier - 3K Watts Amp Timpano 3000 Watts Car Audio Bass Amplifier TPT-BASS3000 1 Ohm – 12 volts Monoblock Class D Car AmpAnybody in need of a car audio bass amplifier that can fit just about anyplace in their car and won’t break the bank should consider this Timpano Bass Series car amplifier.POWER: This monoblock Car Audio amplifier is designed to run your system with the power it needs to perform! 3000 Watts RMS power exclusive for BASS and SUB BASS applications. Its high efficiency provides more power with less battery consumption.FEATURES: Heavy duty power and speakers terminals. Built-in variable crossover filters for easy tuning! Set setting for your subwoofer with a SUBSONIC filter 8 to 40Hz and LPF 30 to 250Hz without a need for an external crossover or DSP. Fine tune it according to your box with variable frequency dial and BASS BOOST at choose frequency up to +10 dB. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.DESIGN: Digital full bridge class D Brazilian technology allows this car audio amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 9.36″ depth x 9.03″ width x 3.05″ heightTECHNOLOGY: This bass amplifier features power, clipping and protection LED indicators on top + intelligent 4-way protection circuitry. Smart and Silent Coolers ensure efficient and noise-free operation of the amplifier.The BASS Series from Timpano combines half-bridge amplifier engineering with the newest semiconductor technologies. Utilizing them, higher power-to-footprint ratios are possible, and the more compact chassis created for this technology does not degrade the output power or stability.To handle even the most demanding bass sessions, this amplifier comes with sturdy heatsink, heavy duty power and ground inputs, high current PCBs, and premium internal components.Additional Information:Number of Channels: 13000 Watts RMS Power at 1 Ohm 14.4Volts1800 Watts RMS Power at 2 Ohm 14.4 VoltsSupply Voltage: 9V ~ 17VFrequency Response: 8Hz ~ 600KHzFlat Switch – ON ( no Crossover Filters ) 8Hz ~ 600HzCrossover Low Pass Filter: 8Hz ~ 250KHzCrossover Subsonic Filter: 8Hz ~ 40HzBass Boost Freq: 30Hz ~ 70HzBass Boost Gain: 0 dB ~ +10 dBSignal to Noise: > 90 dBImpedance Output: 1 OhmMusical Consumption: 132ABass Consumption: 265ADimensions (L x W x H): 9.36” x 9.03” x 3.05”Weight: 6.14 LbsBefore Installing:You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a 150A fuse 12 inches away from the battery as a safety precaution
INCLUDES: 1x MDX1200.2 1 Ohm Full Range 2 Channel Car Audio Amplifier FEATURES: The mini MDX1200.2 1 Ohm delivers 1200 Watts RMS power over 2 channels in a compact, modern amplifier.Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.A small footprint mini heavy duty heatsink makes this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 6.50″ Width by 5.90″ Length and only 2.60″ Height.2 x 600 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.1 Channel Bridged – Double the power output to your speakers by bridging two channels. 1x 1200 Watts RMS at a minimum impedance of 2 Ohm on bridged channel.The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreamsThe ability to choose between 2 or 1 channel configurations is one of this amp’s best features!The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!When you use with 2 channel configuration, its high power output channels allow you to install 8x 8 Ohm speakers, drivers or tweeters in parallel giving out 75 watts per component.You can take to a whole new level of stereo power and install just 2x 4 Ohm speakers in parallel giving 150w per speaker! Or just bridge it and turn it into a 1 channel amplifier.600 Watts at 1 Ohm per Channel1200 Watts at 2 Ohm on Bridged ChannelHigh Output that takes up little space!Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.Speaker wire converter built-in, the HIGH LEVEL INPUT makes it easy to add this amplifier to any factory radio.At only 2.70 lbs allows any custom system to achieve the highest performance and weight ratio possible.PRV Audio MDX1200.2 1 Ohm MINI 2 Channel Car Audio Amplifier 2 x 600 Watts RMS at 1 Ohm – Ultra Compact Stereo Amp GENERAL SPECIFICATIONSImpedance1 Ohm per ChannelChannels2 ChannelRated RMS Power at 14.0 V at 1 Ohm2x 600 Watts RMSRated RMS Power at 14.0 V at 2 Ohm2x 380 Watts RMSBridged Rated RMS Power at 14.0 V at 2 Ohm1x 1200 Watts RMSAverage Efficiency85%Operating Voltage8 to 16 VoltsMusical Current Draw57 AMinimal Power Wire Input(OFC) 4 Gauge wiresBuilt-in CrossoverFixed HPF & LPF at 80 HzMinimal Speaker Wire Output12 GaugeFrequency Response(-3dB)10 – 20,000 HzMin. Input Sensitivity for Max. Output0.2 to 4vSignal InputRCA CablesSignal to Noise>90 dBProtection SystemHigh Temperature / Short circuit on OutputHeat Sink TypeMini Heavy Duty Cast AluminumDimensions ( Width x Depth x Height )6.50″ x 5.90″ x 2.60″Weight2.70 Lbs
1x MDX1800.1 1 Ohm Full Range Ultra Compact Car Amp 1800 Watts RMS at 1 Ohm. Its high power output channel allow you to install 8x 8 Ohm Speakers, drivers or tweeters in parallel at 1 Ohm, giving up to225 watts per component.