BMS – Page 2 – Capital Tower

5S 60A 18.5v 21V Li-ion LiPo Lithium BMS Battery Balance 3.7v

By |2026-07-23T04:01:16+00:00July 23rd, 2026|

We offer professional design consultation and services. Please let us know about your project! Purchase price of item will be credited a full 100% towards consultation information and services. Billed @$65 per hour, in 15min increments. Description:This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. Wires are not included. We recommend 16-12ga wire for the load bearing lines, and 22-18ga wire for the balance leads. Soldering is required. There are 2 options to wire the BMS. The first option uses the COMMON Port for both charge and discharge at 60A. The second option, uses a SEPARATE Port for charging (60A) and discharging (100A). Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 21VMaximum starting current: 100ADischarge current: 60A-100ACharge current: 60ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x Li-ion Battery Protection Board Condition is New. Shipped with USPS First Class.

Daly BMS 3S-16S 12V-60V 15-200A Common Port w/Balance NTC for Li-ion LiFePo4 lot

By |2026-07-23T04:01:12+00:00July 23rd, 2026|

3S 100A 12.6v BMS LED Heatsink Li-ion Lithium Battery Balance

By |2026-07-23T04:01:12+00:00July 23rd, 2026|

3S 100A BMS LED Heatsink Li-ion Lithium Battery Balance Charger 3s 3 Cell Description:This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. There are 2 options to wire the BMS. The first option uses the COMMON Port for both charge and discharge at 60A. The second option, uses a SPERATE Port for charging (60A) and discharging (100A), requires an extra solder point but is worth the added output. Battery compatibility: Voltage of 2.7V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 12V - 12.6VMaximum starting current: 100ADischarge current: 100A Charge current: 60ABoard Size: approx. 42*60*7.4mmPackage includes: 1 x Lithium Battery Protection Board 3S 100A BMS LED Heatsink Li-ion Lithium Battery Balance Charger 3s 3 Cell. Condition is New. Shipped with USPS First Class.

Daly BMS 3S-16S 12V 24V 36V 48V 60V 15A-60A Li-ion LiFePo4 BMS w/Balance&NTC lot

By |2026-07-23T04:01:12+00:00July 23rd, 2026|

Daly BMS 4S 12V/8S 24V/16S 48V 100A-250A LiFePo4 Smart BMS &Bluetooth Module lot. JK Smart BMS 4S-24S 40A-300A Li-ion LiFePo4 BMS with Active Balance BT/LCD Lot. Daly BMS 3S-16S 12V-48V 10A-60A Li-ion LiFePo4 Battery ProtectionBoard w/Balance.

JK BMS 4S-8S 12V-24V 200A Li-ion LiFePo4 BMS with 1A Active Balance BT/RS485 lot

By |2026-07-23T04:01:11+00:00July 23rd, 2026|

JK BMS, they are smart therefore with bluetooth and are equipped with a built-in active balancer, this will allow you to always have balanced cells and battery with full capacity. 1 JK smart bms (Built-in Bluetooth).

Daly Smart BMS 3S-16S Li-ion LiFePo4 12V-60V Battery 15A 20A 40A 60A with NTC

By |2026-07-23T04:01:09+00:00July 23rd, 2026|

1 NTC Temperature Sensor(G-series Hardware BMS included in). Charging current: 15A, 20A, 40A, 60A. 1 G/H-series Hardware BMS. Charging over-current protection: 15A±2A, 25A±3A, 56A±10A, 60A±. Applicable battery models: 3.2V Lifepo4 Battery, 3.7V Li-ionBattery.

4S 40A BMS 12v – 16v Heatsink Kit Li-ion Lithium Battery Charger Balance

By |2026-07-23T04:01:07+00:00July 23rd, 2026|

Please note: Single BMS boards may be shipped via USPS First Class Large Letter, so a tracking number may not be available. Description: This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. This model contains the same BMS and heatsink as the preassembled model. The buyer will have to apply the self adhesive heatsink to the BMS board. Instructions are below and will be sent with the package. Kit assembly instructions:1. Remove the protective film from the back of the heatsink self-adhesive thermal pad.2. Place the heatsink thermal pad side down on to the main MOSFET group.3. Hold for 15 seconds. The thermal pad and heatsink is rated for long-term usage at 120 C. Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 12V - 16.8VMaximum starting current: 80ADischarge current: 40A Charge current: 20ABoard Size: approx. 46*60*7.4mmPackage includes: 1 x Lithium Battery Protection Board 4S 16.8V 40A Li-ion LiPo Lithium Battery Charger Balance BMS Protection APEX. Condition is New. Shipped with USPS First Class.

Daly BMS 3S-16S 12V-48V 15A-60A Li-ion LiFePo4 BMS Common Port w/ Balance+NTC US

By |2026-07-23T04:01:07+00:00July 23rd, 2026|

JK-B1A24S15P Smart BMS 8S-24S 150A LiFePo4 Li-ion BMS w/Active Balancer 1A lot. Upgrade Hardened Gear Kit Extruder Gear for Flashforge Adventurer 5M /5M Pro US. 1 NTC Temperature Sensor(G-series Hardware BMS included in).

BMS 3S 60A – 80A 12.6v Li-ion Lithium APEX GOLD Battery Balance Charger 12v LiPo

By |2026-07-23T04:01:05+00:00July 23rd, 2026|

Description: The BMS is a separate port/connection model, the charge source and output have individual connections. If a common port BMS is needed please see this link https://www.ebay.com/itm/184567779219 This BMS balance board is used for a lithium battery pack to equalize voltage and protect the cells. This module charges, discharges, balances, and acts as a low voltage/over charge cutoff. This model uses an incredible heatsink for intense operation and reliability. A new generation of MOSFET (AOD472) has been added to the BMS to increase pulsed amp current capability to over 100A. Battery compatibility: Voltage of 2.5V - 4.2V lithium battery (18650, 26650, LiPo, Li-ion)Charging input voltage: 12V - 12.6V(Max)Maximum starting current (<1s): 100ADischarge current (sustained): 40A/60ACharge current: 10ABoard Size: approx. 41*62*7.4mm Package includes: 1 x Lithium Battery Protection Board1 x Wiring Instruction Guide Condition is New. Shipped with USPS First Class.

JBD BMS Smart 4S 12V 100A Lifepo4 Battery Protective Board Common Port w/Balance

By |2026-07-23T04:01:05+00:00July 23rd, 2026|

JBD Smart BMS 4S 12V 100A 150A 200A LiFePo4 Battery Board Common Port w/Balance. JBD Smart BMS 10S-17S 36V 48V 60V 50A Li-ion Battery Common Port w/Balance BT EC. 1 4S LiFePo4 JBD SMRAT BMS(Built-in Bluetooth).