Type: 5/8 wave ground plane. Height (approx): 6700 mm / 21.98 ft. Materials: Aluminium, Copper, Galvanized steel, Nylon. Connector: UHF-female (SO-239). Grounding protection: DC-Ground. Max Power: 1000 Watts (CW) continuous.
Versatile Mounting: Can be installed as a traditional Flat-Top Dipole, Inverted V, or Sloper. Professional 80-10m HF Multi-Band Antenna with SO-239 Connector. Classic HF Performance. Wire Type 14 AWG Stranded Copper.
New Jetstream JTG5RV G5RV Antenna kit for 10-80m (3.5-30MHz with tuner). Fully assembled, just add 50ohm coax cable to connect to transceiver. For best results use with antenna tuner (not included). Maximum power 2000W. Measures 102ft across the top dipole section of hard drawn 14AWG stranded copper antenna wire. Heavy Duty Ten-Tec ladderline center insulator, feed through 30ft of 450ohm ladder line. Terminated into heavy duty coax feedline insulator with SO-239 connector for installing any length of 50ohm coax cable (not included). Includes 2 end insulators, 100Ft of 1/8in nylon rope, and instructions. Install as flat top or inverted vee antenna. NOTE: Center insulator hardware not rated for marine use or costal regions and may corrode with exposure to costal weatherThis item ships via USPS Ground, UPS, or FedEx mail within the Continental US depending on location at our discretion. This item is not available for direct shipment outside the Continental US or to a PO Box. Visit our eBay store for other radio accessories.
Dipole Antenna. Space-Saving Design: Half the size of a standard G5RV—ideal for small yards or portable use. Fully assembled and ready to hang, the WA-1040 uses a 51-foot horizontal radiator coupled with a 16-foot matching ladder line.
EFHW-4010-1KW-ICAS Multi-Band End Fed Half-Wave AntennaThe EFHW-4010-1KW-ICAS is a premium End-Fed Half-Wave (EFHW) antenna designed for seamless multi-band operation across the 40/20/15/10m bands. Unlike many end-fed antennas on the market, this model requires no antenna tuner, thanks to its resonance on 40m (7 MHz) and its harmonics (2nd, 3rd, 4th, etc.).Features and Advantages No Tuner Required: Fully resonant across multiple bands. High-Efficiency Transformer:Designed with two FT-240 (2.4inch dia.) stacked cores for minimal insertion loss.Transformation ratio of ~56:1 (~2800:50 Ohms).Optimized for 3.5–30 MHz with an unmatched average loss of less than 0.6 dB—a benchmark in the market for RF transformers.Worldwide leader in high-ratio, wide-bandwidth transformer design by E73M. Flexible Installations:Can be deployed in configurations such as horizontal, vertical, inverted V, or inverted L. Stealth Design:Constructed with durable, black #18 AWG wire for a low-visibility, weather-resistant installation.Equipped with stainless steel hardware for longevity.Technical SpecificationsFrequency Range:7–30 MHz.Resonant Bands: 40/20/15/10m.Power Handling:1 kW I.C.A.S. for voice modes.250W for digital modes such as FT8.Wire Length: ~63 feet.Connector: Silver/Teflon SO-239.Transformer: EFHW-330-1KW-ICAS, optimized for 3–30 MHz.Grounding RecommendationsGrounding the coaxial cable at the home’s entry point is highly recommended to protect equipment from electrostatic buildup and prevent electrostatic discharge (ESD).If the transformer box is mounted high above the ground, grounding at the box is unnecessary—ground the coaxial cable instead.Note: Grounding does not affect antenna tuning.SWR PerformanceTypical SWR readings are better than 2:1 when mounted 25–30 feet above ground and fed with 50 feet of RG8X coaxial cable.Perfect for Emergency and Professional UseThis antenna is ideal for ALE HF-Link, NVIS, MARS, ARES, EMCOMM, and similar applications. It’s suitable for both temporary and permanent installations, ensuring reliable communication in critical scenarios.
Shakespeare Centennial 5101 8ft Marine 6dB VHF Radio Boat Antenna White w/Cable img{max-width:100%; height:auto;} img{max-width:100%} Shakespeare Centennial 5101 8ft Classic VHF Antenna - with 15ft Cable & PL-259 Connector.