Looking for an outstanding pair of monitor headphones?. Sweetwater has a suggestion for you in the form of Audio-Technica's ATH-M20x headphones. The closed-back design of the ATH-M20x gives you superior isolation with minimal bleed — out or in.
Overview: Comfortable clip-on design with soft rubber support loops and large ear hangers enables long hours of listening without fatigue Offer a secure, comfortable ear-fitting design for long-wearing listening and sophisticated driver technology for outstanding sonic clarity. Earphones swivel open and click into ideal listening position Each earphone slides into position on a vertical axis for easy adjustment and a truly custom fit Impressive 28 mm neodymium magnets project powerful sound Specifications: Type: Dynamic Weight: 30g Driver Diameter: 28 mm Frequency Response: 14-24000Hz Sensitivity: 110dB/mW Impedance: 32 ohms Length: 1.2m Package Content: 1 x Headphone
Impressive 28 mm neodymium magnets project powerful sound. Length: 1.2m. Impedance: 32 ohms. Sensitivity: 110dB/mW. Frequency Response: 14-24000Hz.
Impressive 28 mm neodymium magnets project powerful sound. Length: 1.2m. Impedance: 32 ohms. Sensitivity: 110dB/mW. Frequency Response: 14-24000Hz.
Upgrade your Audio-Technica cartridge with this high-quality replacement stylus. diamond with aluminum tube, this needle is designed for maximum durability and precision. It is compatible with Audio-Technica models AT91R, At3600l and many others. . It is easy to install and use Same day Fast N FREE shipping in usa
The AT-VMx series elevates premium dual moving magnet cartridge design with added warmth, precision, and realism for engaging vinyl playback. Dual magnets aligned to the stereo groove mirror the cutting head geometry, delivering accurate tracking, wide frequency response, and strong channel separation. Advanced paratoroidal coils with high-purity copper wire, fewer turns, and a center shield plate reduce crosstalk and sharpen transients for a clean, stable stereo image. The AT-VM750xSH adds a lightweight Shibata stylus and solid boron cantilever for greater groove contact, lower distortion, and faster signal transmission, capturing delicate detail and dynamic impact. Easy-mount threaded inserts, a V-cut stylus guard, interchangeable styli, and a low-resonance metal body make this cartridge refined, versatile, and simple to install.
Up for sale is the Audio-Technica AT6006R, the definitive safety raiser for manual turntable users. The AT6006R solves this problem elegantly. Its compact footprint allows it to be installed on almost any turntable with a flat surface between the tonearm and the platter.
The AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell. _x000D_ _x000D_ This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws â no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Manufactured to Audio-Technica's renowned quality standards, each cartridge is meticulously assembled with remarkably tight tolerances. _x000D_ _x000D_ The AT-HS6 is a universal 1/2"-mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum for accurate playback both for DJs and causal listeners. A finger lift enables simple, precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws for connecting the headshell to a cartridge. _x000D_ _x000D_ Specifications: _x000D_ • Frequency response: 20-22,000 Hz _x000D_ • Channel separation: 20 (dB at 1 kHz) _x000D_ • Vertical tracking angle: 23° _x000D_ • Vertical tracking force: 1.8-2.2 g (2.0 g standard) _x000D_ • Stylus construction: Bonded round shank _x000D_ • Recommended load impedance: 47,000 ohms _x000D_ • Coil impedance: 3.3 k ohms (1 kHz) _x000D_ • DC resistance: 485 ohms _x000D_ • Coil inductance: 550 mH (1 kHz) _x000D_ • Load capacitance: 100 to 200 pF _x000D_ • Output: 4.0 mV (1 kHz, 5 cm/sec.) _x000D_ • Channel balance: 2.0 dB (1 kHz) _x000D_ • Stylus shape: 0.3 x 0.7 mil elliptical _x000D_ • Cantilever: Aluminum pipe _x000D_ • Mount: Half-inch _x000D_ • Replacement stylus: AT-VMN95C _x000D_ • Accessories included: Two 11 mm installation screws, two 8 mm installation screws, two washers _x000D_ • Dimensions: 21.2 mm (0.83") H à 21.4 mm (0.84") W à 62.4 mm (2.46") D _x000D_ • Weight: 15.5 g (0.55 oz)
Audio-Technica Consumer AT81CP Conical Phonograph Cartridge for P-Mount Turntabl PRODUCT DESCRIPTION The Audio-Technica Consumer AT81CP is a 0.6 mil conical phonograph cartridge designed for DJs, turntablists, and music aficionados using P-mount turntables in clubs, live sets, and home stereo setups. It features a bonded round stylus shank with a carbon fiber reinforced ABS cantilever. The 18 dB of channel separation and a frequency response of 20 Hz to 20 kHz ensure accurate and detailed audio reproduction. 0.6 mil cartridge fits P-Mount turntablesBonded round shank stylus with carbon fiber reinforced ABS cantilever18 dB of channel separation and 20 Hz to 20 kHz frequency response for accurate audio reproduction Audio-Technica Consumer AT81CP SpecsTypeP-mountStylusConstruction: Bonded round shankShape: 0.6 mil conicalCantilever: Carbon fiber reinforced ABSFrequency Response20 Hz to 20 kHzOutput3.5 mV (1 kHz, 5 cm/second)Channel Separation18 dB at 1 kHzChannel Balance2.5 dB (1 kHz)Tracking Force1 to 1.5 g (1.25 g standard)Recommended Load Impedance47 kOhmsRecommended Load Capacitance100 to 200 pFImpedanceCoil: 2.8 kOhms (1 kHz)InductanceCoil: 400 mH (1 kHz)DC Resistance410 OhmsVertical Tracking Angle20°LifetimeApproximately 300 to 500 hoursReplacement StylusATN81CPReplacementReplaces AT300P, AT3482, AT3482H/U, AT3482P, and AT90CD cartridgesDimensions (H x W x D)0.6 x 0.4 x 1.4" / 15.3 x 10.0 x 35.1 mmWeight0.2 oz / 6 g ? Copyright . All rights reserved. </