counter for wordpress

Arlo Original Charging Adapter for all Arlo cameras

By |July 23rd, 2026|

1x Timpano TPT-1500 4 Ohm Brazilian Amplifier 1600W RMS Car Audio Digital Amp

By |July 23rd, 2026|

INCLUDES: 1x TPT-1500 4 Ohm 1 Channel Car Audio Amplifier Fullrange FEATURES: Timpano 1500 Watts Car Audio Amplifier Fullrange TPT-1500 4 Ohm – 1 Channel Compact 12 volts Monoblock Fullrange Class D Car AmpSmall Footprint Technology! HD Sound Quality!Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.COMPACT DESIGN: Digital class D Brazilian technology allows this car audio amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 9.36″ depth x 5.53″ width x 3.05″ heightPOWER: This monoblock amplifier is designed to run your system with the power it needs to perform! 1500 Watts RMS power output at 4 Ohm 1 channel. Its high efficiency rate of 86% provides more power with less battery consumption.FEATURES: Heavy duty power and speakers terminals. Built-in variable crossover filters for easy tuning! Set setting for your type of speaker with a HPF 10 to 90Hz and LPF 90 to 15,000Hz without a need for an external crossover or DSP. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 15,000Hz was used to give the best sound reproduction on this compact amplifier.Additional Information:Number of Channels: 1RMS Power at 4 Ohm 12.6 Volts: 1200 Watts RMSRMS Power at 8 Ohm 12.6 Volts: 700 Watts RMSSupply Voltage: 9V ~ 15VFrequency Response: 10Hz ~ 15KHzCrossover Low Pass: 90Hz ~ 15KHzCrossover High Pass: 10Hz ~ 90HzSignal to Noise: > 90 dBInput Impedance: 17K OhmImpedance Output: 4 OhmMusical Consumption: 57ADimensions (L x W x H): 9.36” x 5.53” x 3.05”Weight: 3.50 LbsFeatures:The TPT-1500 offer 1 channel with advanced individual equalization features for Midbass and Midhigh, plus the traditional Level, High and Low Pass Filter features. Its Fullrange frequency response from 10Hz to 15KHz allows the installation of Subwoofers, Speakers, Drivers and Tweeters. Timpano 1500 Watts Car Audio Amplifier Fullrange TPT-1500 4 Ohm – 1 Channel Compact 12 volts Monoblock Fullrange Class D Car AmpSmall Footprint Technology! HD Sound Quality!Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 80-90% in a compact Class D full range amplifier.COMPACT DESIGN: Digital class D Brazilian technology allows this car audio amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 9.36″ depth x 5.53″ width x 3.05″ heightPOWER: This monoblock amplifier is designed to run your system with the power it needs to perform! 1500 Watts RMS power output at 4 Ohm 1 channel. Its high efficiency rate of 86% provides more power with less battery consumption.FEATURES: Heavy duty power and speakers terminals. Built-in variable crossover filters for easy tuning! Set setting for your type of speaker with a HPF 10 to 90Hz and LPF 90 to 15,000Hz without a need for an external crossover or DSP. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.TECHNOLOGY: A smart electronic 2-way protection circuit protects the amp if it gets too hot or if speakers fail causing a short! Focusing in sound quality, a full range response of 10 to 15,000Hz was used to give the best sound reproduction on this compact amplifier.Additional Information:Number of Channels: 1RMS Power at 4 Ohm 12.6 Volts: 1200 Watts RMSRMS Power at 8 Ohm 12.6 Volts: 700 Watts RMSSupply Voltage: 9V ~ 15VFrequency Response: 10Hz ~ 15KHzCrossover Low Pass: 90Hz ~ 15KHzCrossover High Pass: 10Hz ~ 90HzSignal to Noise: > 90 dBInput Impedance: 17K OhmImpedance Output: 4 OhmMusical Consumption: 57ADimensions (L x W x H): 9.36” x 5.53” x 3.05”Weight: 3.50 LbsFeatures:The TPT-1500 offer 1 channel with advanced individual equalization features for Midbass and Midhigh, plus the traditional Level, High and Low Pass Filter features. Its Fullrange frequency response from 10Hz to 15KHz allows the installation of Subwoofers, Speakers, Drivers and Tweeters.

Timpano TPT-BASS3000 1 Ohm 3K Watts 1 Channel Class D Compact Amplifier

By |July 23rd, 2026|

INCLUDES: 1X TPT-BASS3000 1 Ohm - Bass Car Audio Amplifier - 3K Watts Amp Timpano 3000 Watts Car Audio Bass Amplifier TPT-BASS3000 1 Ohm – 12 volts Monoblock Class D Car AmpAnybody in need of a car audio bass amplifier that can fit just about anyplace in their car and won’t break the bank should consider this Timpano Bass Series car amplifier.POWER: This monoblock Car Audio amplifier is designed to run your system with the power it needs to perform! 3000 Watts RMS power exclusive for BASS and SUB BASS applications. Its high efficiency provides more power with less battery consumption.FEATURES: Heavy duty power and speakers terminals. Built-in variable crossover filters for easy tuning! Set setting for your subwoofer with a SUBSONIC filter 8 to 40Hz and LPF 30 to 250Hz without a need for an external crossover or DSP. Fine tune it according to your box with variable frequency dial and BASS BOOST at choose frequency up to +10 dB. It also includes Variable Gain Control. Level controls are not for adjusting volume. They adjust the amount of signal that is coming into the amplifier from your signal source.DESIGN: Digital full bridge class D Brazilian technology allows this car audio amplifier to have a small footprint by integrating a high-speed mosfet power supply with top of line transistors to ensure performance in a small heat sink without compromising performance. Dimensions: 9.36″ depth x 9.03″ width x 3.05″ heightTECHNOLOGY: This bass amplifier features power, clipping and protection LED indicators on top + intelligent 4-way protection circuitry. Smart and Silent Coolers ensure efficient and noise-free operation of the amplifier.The BASS Series from Timpano combines half-bridge amplifier engineering with the newest semiconductor technologies. Utilizing them, higher power-to-footprint ratios are possible, and the more compact chassis created for this technology does not degrade the output power or stability.To handle even the most demanding bass sessions, this amplifier comes with sturdy heatsink, heavy duty power and ground inputs, high current PCBs, and premium internal components.Additional Information:Number of Channels: 13000 Watts RMS Power at 1 Ohm 14.4Volts1800 Watts RMS Power at 2 Ohm 14.4 VoltsSupply Voltage: 9V ~ 17VFrequency Response: 8Hz ~ 600KHzFlat Switch – ON ( no Crossover Filters ) 8Hz ~ 600HzCrossover Low Pass Filter: 8Hz ~ 250KHzCrossover Subsonic Filter: 8Hz ~ 40HzBass Boost Freq: 30Hz ~ 70HzBass Boost Gain: 0 dB ~ +10 dBSignal to Noise: > 90 dBImpedance Output: 1 OhmMusical Consumption: 132ABass Consumption: 265ADimensions (L x W x H): 9.36” x 9.03” x 3.05”Weight: 6.14 LbsBefore Installing:You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;• To avoid damaging the cables, make sure that they do not touch sharp metal edges. Important: Use a 150A fuse 12 inches away from the battery as a safety precaution

PRV MDX1200.2 1 Ohm Mini 2 Channel 2x 600 Watts Amp Compact Car Audio Amplifier

By |July 23rd, 2026|

INCLUDES: 1x MDX1200.2 1 Ohm Full Range 2 Channel Car Audio Amplifier FEATURES: The mini MDX1200.2 1 Ohm delivers 1200 Watts RMS power over 2 channels in a compact, modern amplifier.Designed for high performance systems that require high power output but have very little space to spare, the MDX Series features exclusive and patented technologies that ensure a high definition sound quality in the most compact and reliable design.Engineered to be the most efficient amplifier able to deliver impressive power output while minimizing the strain on your electrical system. This means you can enjoy the benefits of high power performance without draining your battery quickly.A small footprint mini heavy duty heatsink makes this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Overall 6.50″ Width by 5.90″ Length and only 2.60″ Height.2 x 600 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology, gives you the benefit of wiring multiple speakers and dividing the power per channel.1 Channel Bridged – Double the power output to your speakers by bridging two channels. 1x 1200 Watts RMS at a minimum impedance of 2 Ohm on bridged channel.The latest technology on surface mount components ensures best performance against vibration and superior sound quality, allowing enthusiasts and competitors to build the system of their dreamsThe ability to choose between 2 or 1 channel configurations is one of this amp’s best features!The MDX Series is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!When you use with 2 channel configuration, its high power output channels allow you to install 8x 8 Ohm speakers, drivers or tweeters in parallel giving out 75 watts per component.You can take to a whole new level of stereo power and install just 2x 4 Ohm speakers in parallel giving 150w per speaker! Or just bridge it and turn it into a 1 channel amplifier.600 Watts at 1 Ohm per Channel1200 Watts at 2 Ohm on Bridged ChannelHigh Output that takes up little space!Featuring a mini heavy-duty heatsink, as well as a built-in cooling fan, this amplifier runs cool under even the most demanding playlists.Speaker wire converter built-in, the HIGH LEVEL INPUT makes it easy to add this amplifier to any factory radio.At only 2.70 lbs allows any custom system to achieve the highest performance and weight ratio possible.PRV Audio MDX1200.2 1 Ohm MINI 2 Channel Car Audio Amplifier 2 x 600 Watts RMS at 1 Ohm – Ultra Compact Stereo Amp GENERAL SPECIFICATIONSImpedance1 Ohm per ChannelChannels2 ChannelRated RMS Power at 14.0 V at 1 Ohm2x 600 Watts RMSRated RMS Power at 14.0 V at 2 Ohm2x 380 Watts RMSBridged Rated RMS Power at 14.0 V at 2 Ohm1x 1200 Watts RMSAverage Efficiency85%Operating Voltage8 to 16 VoltsMusical Current Draw57 AMinimal Power Wire Input(OFC) 4 Gauge wiresBuilt-in CrossoverFixed HPF & LPF at 80 HzMinimal Speaker Wire Output12 GaugeFrequency Response(-3dB)10 – 20,000 HzMin. Input Sensitivity for Max. Output0.2 to 4vSignal InputRCA CablesSignal to Noise>90 dBProtection SystemHigh Temperature / Short circuit on OutputHeat Sink TypeMini Heavy Duty Cast AluminumDimensions ( Width x Depth x Height )6.50″ x 5.90″ x 2.60″Weight2.70 Lbs

PRV MDX1800.1 1 Ohm Mini 1 Channel 1800 Watts Amp Compact Car Audio Amplifier

By |July 23rd, 2026|

1x MDX1800.1 1 Ohm Full Range Ultra Compact Car Amp 1800 Watts RMS at 1 Ohm. Its high power output channel allow you to install 8x 8 Ohm Speakers, drivers or tweeters in parallel at 1 Ohm, giving up to225 watts per component.

AltumView Elderly Care Monitor with Privecy Preserving Software

By |July 23rd, 2026|

The monitor is equipped with face detection technology to identify others in the view. You can also monitor the past activities.

ARCCTV 2-Pack 2K Indoor WiFi6 Security Camera Auto-Tracking 360°PTZ 24/7 Working

By |July 23rd, 2026|

360°Coverage Without Blind Spots. When the SD card is full, the old video is automatically overwritten. IP66 Waterproof For Outdoor Use. You can see more valuable details to identify people, vehicles, and other objects.

2x PRV Audio 4MR60-4 Midrange Loudspeakers Car Audio Speakers 4″ 4 Ohm 120Watts

By |July 23rd, 2026|

INCLUDES: 2x 4MR60-4 4" MIDRANGE LOUDSPEAKER Features The 4MR60-4 full range speaker delivers broad frequency coverage and flat midrange response that ensures vocals and instruments to deliver ideal sound. The 4″ midrange speaker 4MR60-4 is a pro audio midrange with very high sensitivity and a smooth extended frequency response up to 8 kHz. The small dimensions and high output make it very useful to use in compact line array systems as a transition between the mid bass and high frequency way. Each material and component such as the woven fiberglass cone, large spider, and rubber surround is carefully chosen to ensure great sound quality and low distortion. The 4MR60-4 even operates at high power. It is also applicable in home theaters, satellites, and surround speakers as well as in car audio when you are limited in space and require extended frequency response. Each material and component such as the woven fiberglass cone, large spider, and rubber surround is carefully chosen to ensure great sound quality and low distortion, it even operates at high power. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 30 Watts Program Power: 60 Watts Sensitivity (1W/1m): 90 dB Voice Coil Diameter: 0.78″ Technical Details GENERAL SPECIFICATIONS Nominal Diameter 4” (101.6 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 30 Watts Program Power 60 Watts Sensitivity 2.00V at 1m 90 dB Recommended Hi Pass Crossover* *For Full Power Handling 190 Hz** **12db Per Octave Crossover Frequency Response at -10dB 90 – 15,000 Hz Voice Coil Diameter 0.78” (20 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 7.5 mm Former Material Kapton Magnetic Gap Depth 3.5 mm Frame Material Stamped Steel THIELE-SMALL PARAMETERS Equivalent Volume Vas 3.26 l Excursion (mathematical)*** Xmax 2.87 mm Free Air Resonance Fs 89.88 Hz Mechanical Factor Qms 7.34 Electrical Factor Qes 0.75 Total Factor Qts 0.68 Cone Area Sd 57 cm² Mechanical Mass Mms 4.32 g Bl Factor Bl 3.42 Tm Dc Resistance Re 3.6 Ohms Inductance Le 0.20 mH at 1 kHz Mechanical Mass Without Air Mmd 4.07 g Mechanical Compliance Cms 0.725 mm/N EXTRA INFO Overall Diameter 4.96” (126 mm) Front Mount Baffle Cutout 4.02” (102 mm) Mounting Depth 2.20” (56 mm) Overall Depth 2.36” (60 mm) Net Weight 1.15 Lbs (0.52 kg Shipping Weight 1.24 Lbs (0.56 kg) Carton Dimensions W x L x H 4.68” x 4.68” x 3.15” (119 x 119 x 80 mm)

TP-Link Tapo C200 1080P Full HD Pan/Tilt Home Security WiFi Camera

By |July 23rd, 2026|

TP-Link Tapo C200 1080P Full HD Pan/Tilt Home Security WiFi Camera. Condition is New. Shipped with USPS Ground Advantage.

TP-Link Tapo Smart Video Doorbell Camera Wireless with Chime, 2K D210 White

By |July 23rd, 2026|

Enhance your home security with the TP-Link Tapo Smart Video Doorbell Camera. Enjoy stunning 2K resolution and full-color night vision with integrated spotlights. This wireless doorbell features a 160° ultra-wide view, making sure you never miss a visitor. Benefit from AI detection, local storage, and no monthly fees. Light cosmetic wear does not affect functionality. Experience fast shipping with same-day dispatch for your convenience. Upgrade your home surveillance effortlessly! Perfect for any savvy homeowner. .