8 Ohm – Page 3 – Capital Tower

Philips Fidelio X3 Wired Over Ear Open Back Headphones

By |2026-07-23T09:36:53+00:00July 23rd, 2026|

About this itemAll new Philips Fidelio X3 with wide, natural soundstage and uncolored soundExquisitely tuned 50 mm multi-layer polymer (with dampening gel) diaphragms - delivers exquisitely detailed highs, full and smooth midrange, and impactful (without overpowering) bassHi-Res Audio certified. Hear the full impact of every note when wired to a high-resolution source for a lifelike performance.Open-back design. Wide, natural soundstage with acoustically transparent Kvadrat speaker fabric. By eliminating the air pressure build-up behind the diaphragms, an immersive and spacious sound is born.Premium finishing also means responsibly sourced materials. The sumptuous black Muirhead Scottish leather covering the headband is sustainably and ethically sourced.Balanced and unbalanced inputs means it is ready for your favorite headphone amp or your everyday phone and mobile devices.Detachable Balanced and Unbalanced 3 m oxygen-free cables included3.5 – 6.3 mm adapter + cable clip are also includedTechnical specifications: 5 - 40,000 Hz frequency response | Open acoustic system | 500mW maximum power input | 30 Ohm impedance | 100 db @ 1 mW sensitivity | 13.4 Oz weight

(2) 4″ SUPER TWEETER TIMPANO 900WATTS MAX TPT-ST25 CHROME BULLET 8 OHM PRO AUDIO

By |2026-07-23T08:58:22+00:00July 23rd, 2026|

Timpano TPT-ST25 CHROME 4” PRO Audio Super Tweeters 900 Watts 8 Ohm – Pair The ST25 tweeters are a high performance pair of 4 inch high compression bullet tweeters that are rated at 900 watts max power. Ready to delivery major concert sound to your sound system. Titanium diaphragm with a 1.5″ voice coil They handle 300 watts RMS to provide continuous high output levels High sensitivity output designed for pro audio systems Built In Crossover – Capacitor that acts as a crossover to attenuate low end frequencies that might otherwise harm the super tweeters. These tweeters are capable of generating high end frequencies at extremely loud volume, to keep up in the high SPL systems. Built with high strength magnet and a pure titanium diaphragm are designed to reproduce the brightest and crispest sound. Also available in Black finish. Specs: 900 Watts Max Power per pair / 450 Watts each 300 Watts RMS Power per pair / 150 Watts each Impedance: 8 Ohms each tweeter Sensitivity: 109 dB Frequency Response: 3,500 – 20,000Hz Titanium Diaphragm with a 1.5″ voice coil Recommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter 7500 Hz under 225 Watts of Amplifier RMS Power with 18dB Slope 6000 Hz under 150 Watts of Amplifier RMS Power with 12dB Slope Sizing: Mounting Depth: 2.24” Mounting Cutout Diameter: 3.75″ Overall Size: 4″ x 4″ x 2.68″ Weight: 2.65 Lbs each tweeter Accessories Included: 4x Mounting Screws HPF Capacitor attached per tweeter 1x Timpano Logo Sticker With a great price-to-performance, these tweeters provides output of professional systems without breaking the bank. Sold as a set of 2 tweeters (pair). Replacement Diaphragm: TPT-RPST25

Lot of 2 Sony MDR-E9LP Fashion Earbuds – Brand New Factory Sealed Black

By |2026-07-23T05:32:14+00:00July 23rd, 2026|

These are perfect for anyone looking forhigh-quality, affordable earbuds or for gifts, resale, or personal use. Sony MDR-E9LP in-ear earbuds. Lot includes2 earbuds.

NIP Sony MDR-E9LP/BZ In-Ear Wired Fashion Earbuds Headphones Black Clear Sound

By |2026-07-23T05:32:11+00:00July 23rd, 2026|

The NIP Sony MDR-E9LP/BZ In-Ear Wired Fashion Earbuds Headphones in Black offer a stylish and high-quality audio experience. With a 40mm driver size and double earpieces, these earbuds provide clear sound for live monitoring and everyday use. Featuring Bluetooth wireless technology, replaceable ear tips, noise isolation, and built-in microphone, these earbuds are designed for convenience and versatility. The sleek design, on-cable control, and noise cancellation capabilities make these Sony earbuds a top choice for music lovers and professionals alike.

Neckband Bluetooth Speaker, Wireless Wearable Speaker w/lightest 78g Weight, Hig

By |2026-07-23T05:13:27+00:00July 23rd, 2026|

【Ergonomic Shapestay Design & Lightest Weight at 90g】The new neckband bluetooth Speaker is based on ergonomic shapestay design, once you put this wearable speaker around your neck, you’ll hardly know you’re wearing it, weighing only 90g, and you’ll never feel a burden by leaning lightly on the shoulder.

(2) 4″ SUPER TWEETER TIMPANO 900WATTS MAX TPT-ST25 BLACK BULLET 8 OHMS PRO AUDIO

By |2026-07-23T14:38:32+00:00July 23rd, 2026|

Timpano TPT-ST25 BLACK 4” PRO Audio Super Tweeters 900 Watts 8 Ohm – Pair The ST25 tweeters are a high performance pair of 4 inch high compression bullet tweeters that are rated at 900 watts max power. Ready to delivery major concert sound to your sound system. Titanium diaphragm with a 1.5″ voice coil They handle 300 watts RMS to provide continuous high output levels High sensitivity output designed for pro audio systems Built In Crossover – Capacitor that acts as a crossover to attenuate low end frequencies that might otherwise harm the super tweeters. These tweeters are capable of generating high end frequencies at extremely loud volume, to keep up in the high SPL systems. Built with high strength magnet and a pure titanium diaphragm are designed to reproduce the brightest and crispest sound. Also available in Chrome finish. Specs: 900 Watts Max Power per pair / 450 Watts each 300 Watts RMS Power per pair / 150 Watts each Impedance: 8 Ohms each tweeter Sensitivity: 109 dB Frequency Response: 3,500 – 20,000Hz Titanium Diaphragm with a 1.5″ voice coil Recommended High Pass Filter on TPT-SP4BT DSP, Based on Power per Tweeter 7500 Hz under 225 Watts of Amplifier RMS Power with 18dB Slope 6000 Hz under 150 Watts of Amplifier RMS Power with 12dB Slope Sizing: Mounting Depth: 2.24” Mounting Cutout Diameter: 3.75″ Overall Size: 4″ x 4″ x 2.68″ Weight: 2.65 Lbs each tweeter Accessories Included: 4x Mounting Screws HPF Capacitor attached per tweeter 1x Timpano Logo Sticker With a great price-to-performance, these tweeters provides output of professional systems without breaking the bank. Sold as a set of 2 tweeters (pair). Replacement Diaphragm: TPT-RPST25

PA Power Horn Speaker (White) 100 Watt Indoor/Outdoor 80 Watt W/Bluetooth Audio

By |2026-07-23T04:04:37+00:00July 23rd, 2026|

Speaker Horn with Amplifier. Speaker Horn specs These can be used for indoor and outdoor PA, outside car audio, marine applications and phone systems. Indoor / Outdoor Use UV Protected. 8 Ohms Magnet Weight: 11.6 Oz.

(2) TIMPANO TPT-DH175 1″ EXIT HIGH FREQUENCY COMPRESSION HORN DRIVER 250W 8 OHM

By |2026-07-23T04:04:34+00:00July 23rd, 2026|

INCLUDES: 2x TPT-DH175 Horn Drivers Car / Pro Audio 8 Ohm 1″ Exit High Frequency Compression Driver - 250 Watts each horn driver FEATURES: The Timpano TPT-DH175 is a 1″ phenolic dome compression driver specially designed to offer a smooth extended frequency response over a broad band, from mids to highs, with very high efficiency.Easy to install anywhere, even on car doors. In addition, the small diameter of the compression driver allows simple installation at the front. This horn driver can deliver space filling sound at extremely high SPL levels, a great choice for high output PA, home theater, and car audio systems.The wide frequency range ranges from 1,300Hz to 19,000Hz, and the high sensitivity of 108 db makes it a very loud and efficient driver.Handles an impressive 250 Watts Max power and 75w RMS, ensuring that it effortlessly complements your entire audio system. Capacitor included. 8 Ohm Voice Coil.Complete your pro audio system with the TPT-DH175. With its 1″ voice coil, this driver maximizes loudness per watt, delivering crisp and clear high frequency range sound.Mounting Depth: 4.64”. Extremely loud and clear highs with an amazing frequency response that can even play some mids. Shallow mounting depth for custom car audio door panels.Ideal for compact 2 or 3-way systems. The 4.5″ x 4.5″ horn TPT-HL11-25 produces a controlled 45° x 45° dispersion pattern to reduce unwanted reflections while still delivering room filling sound. As a replacement for pro audio cabinets, this high frequency horn driver has a common footprint.Specs:250 Watts Max Power75 Watts RMS PowerImpedance: 8 OhmSensitivity: 108 dBFrequency Response: 1.3 kHz – 19 kHz1″ Voice CoilPhenolic DiaphragmFerrite DriverRecommended High Pass Filter on TPT-SP4BT DSP Crossover1400 Hz under 125 Watts of Amplifier RMS Power with 18dB Slope1200 Hz under 75 Watts of Amplifier RMS Power with 12dB SlopeSizing:Mounting Depth: 4.64″ (117.8 mm)Mounting Cutout size: 3.50″ x 3.50″ + TerminalOverall size: 4.50″ Wide x 4.50″ Length x 4.92″ HeightWeight: 1.15 LbsOriginal Manufacturer Replacement Diaphragms that Maintain Peak Performance are available: TPT-RPDH175

2x PRV 10″ Midrange Speaker 10MR650A 8 Ohm ALTO 10in PRO Car Audio 1300w Package

By |2026-07-23T03:21:55+00:00July 23rd, 2026|

INCLUDES: 2x 10MR650A - 10" Midrange loudspeakers 1300 Watts Package - 650 Watts each Speaker FEATURES:PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. Meet the new improved version from 10W650ANew basket design implemented, reducing its size from 4.33″ to 3.90″ of mounting depthImprovement on output throughout + 1dB on the low frequency frequency responseGain on the vocal response from 350 Hz to 4000 HzIncreased on voice coil winding has improved power handle and raised its Xmax to 5.72 mmThe purpose to built this midrange was to increase vocal response where the 10W650A lack output without losing any midbass.All new features on the 10MR650A make it capable of high output and low distortion, this mid range is perfect for filling in the important midrange response in any high output sound system. Great Addition to the ALTO Series!Highlights2.5″ layer CCAW voice coil wound on a glass fiber former, 8 ohmsVented pole piece dissipates excess heat to minimize power compression650 watts RMS program power ratingCovers the majority of the vocal range allow easy system integration with a tweeterThe new 10MR650A from ALTOSerieshas everything you want in a midrange pro audio loudspeaker, without sacrificing performance we have designed a compact and versatile footprint with only 3.90” of mounting depth.This Midrange works great as a door speaker in car audio applications or as low frequency driver for a two-way satellite speaker concept. GENERAL SPECIFICATIONSNominal Diameter10″ (254 mm)Nominal impedance8 OhmNominal Power Handling325 WattsContinuous Program Power (RMS)650 WattsMax Peak Power1300 WattsSensitivity 2.83V at 1m97.5 dBRecommended Hi Pass Crossover** **For Full Power Handling150 Hz** **12db Per Octave CrossoverFrequency Response at -10DB80 – 6,500 HzVoice Coil Diameter2.5″ (68 mm)Voice Coil WireCCAWVoice Coil Winding Depth16.2 mmFormer MaterialPolyimideMagnetic Gap Depth9.5 mmFrame MaterialStamped Steel EXTRA INFOOverall Diameter10.10”(256.5 mm)Front Mount Baffle Cutout9.20” (233.5 mm)Mounting Depth3.90”(99 mm)Overall Depth4.23”(107.5 mm)Net Weight10.4 Lbs (4.7 kg)Shipping Weight12.8 Lbs (5.8 kg)Carton Dimensions W x L x H12.9”x 12.9” x 6.9” (328 x 328 x 175mm)

(2) 10″ MIDRANGE TIMPANO 1000W TPT-MD10 PRO 8 OHM CAR PRO AUDIO SPEAKERS – PAIR

By |2026-07-23T10:46:03+00:00July 23rd, 2026|

INCLUDES: 2x TPT-MD10 Pro 10″ Pro Audio Mid Range Loudspeaker Car Audio | Pro Audio TPT-MD10 Pro 10″ Pro Audio Midrange Loudspeaker The TPT-MD10 PRO is a very high efficiency 10″ driver for professional mid range speaker applications. It features a 3″ copper voice coil and a low-mass yet stiff cone to help provide clean, detailed and high-impact sound reproduction. This Italian-Designed 10″ pro PA speaker is built with the finest components available in the pro audio market. Its aluminum demodulation ring in the motor reproduces audio accurately at concert-level volume. Capable of handling 1000 WattsImpressive 100 dB sensitivity for maximum outputLarge vented ferrite motor for increased output and power handlingAluminum demodulating ring allows for a very low distortion output Specs: 1000 Watts Max Power 400 Watts RMS Power Impedance: 8 Ohm Sensitivity: 100 dB Frequency Response: 80 – 4,000Hz Voice Coil: 3” Recommended High Pass Filter: 125 Hz under 500 Watts of Amplifier RMS Power with 18dB Slope 120 Hz under 400 Watts of Amplifier RMS Power with 12dB Slope Sizing: Mounting Depth: 4.45” Mounting Cutout Diameter: 9.09″ Overall Size: 10.29″ x 10.29″ x 5.06″ Weight: 16.00 Lbs

Previous 1 234 5 Next