8.0 mm – Capital Tower

4x PRV Audio 10MB800FT Midbass Speakers FORTE Car PRO Audio 10″ 8 Ohms 800 Watts

By |2026-07-23T10:46:04+00:00July 23rd, 2026|

INCLUDES: 4 - 10MB800FT - 10" MIDBASS LOUDSPEAKER Features For high output speaker systems, PRV Audio’s 10MB800FT mid-bass is an excellent option capable of amazing performance. A great new addition to the Forte Series, where more power handling and less distortion on mid-low mid-bass frequencies is the key. The 10MB800FT is a rugged 10″ mid-bass that combines mid-bass punch and mid clarity at remarkable SPL output with low distortion and extended mid-bass response. Optimized for use in compact enclosures, this mid-bass speaker provides a smooth vocal response with great output from 500 Hz to 1500 Hz and useful response up to 6,500 Hz, making it a great choice for larger 2 and 3 way systems. Highlights 2.5″ Inside/Out aluminum voice coil wound on fiberglass former for hi-temp performance, 8 ohms Ventilated voice coil gap reduces power compression High Xmax for more mid-bass output 800 watts continuous program power rating makes the high acoustical output Excellent performance in 2-way or 3-way systems To get superior fidelity, the special composite cone is built with non-pressed paper for a reduced break-up, delivering a smooth frequency response and a low moving mass, increasing the efficiency of the speaker. The Perfect speaker for TUKUTEO sound. The high sensitivity rating of 99 dB 1W/1M which makes it capable of generating a lot of output! This 10″ is a great mid-bass option for pro audio systems or high SPL automotive systems, where extremely high output is required. The voice coil is wound on a 2.5″ glass fiber with aluminum wire keeping weight to a minimum for incredibly quick transient response. Engineered with 11 mm of winding depth, this inside/outside voice coil provides excellent thermal and mechanical durability. Popular Combination with the 10MB800FT is the WG2500Ti Titanium Compression Driver – with Our DSP 2.8x ( digital sound processor ) the PRO Audio On Wheels systems can easily tune both components to blend in together with the following settings: 10MB800FT – High Pass Filter HPF 95 Hz BT18 Filter to Low Pass Filter LPF 1800 Hz BT12 Following the compression driver from 1200Hz all way to 17,000Hz Recommended system package 8x 10MB800FT + 4x WG2500Ti Technical Details GENERAL SPECIFICATIONS Nominal Diameter 10″ (254 mm) Nominal impedance 8 Ohms Rated AES Power Handling (RMS) 400 Watts Program Power 800 Watts Sensitivity 2.83V at 1m 99 dB Recommended Hi-Pass Crossover** **For Full Power Handling 120 Hz** **12db Per Octave Crossover Frequency Response at -10dB 65 – 6,500 Hz Voice Coil Diameter 2.5″ (65 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 11.0 mm Former Material Glass Fiber Magnetic Gap Depth 8.0 mm Frame Material Die-Cast Aluminum

PRV 6.5″ Midrange Shallow Speaker 6MR200A-4 Slim Pro Car Audio 400W 4 Ohm – PAIR

By |2026-07-23T10:45:55+00:00July 23rd, 2026|

INCLUDES: 2x 6MR200A-4 PRV 6.5″ Midrange Car Speaker 6MR200A-4 4 Ohm - 400 Watts package - 200 Watts each speaker (REFURBISHED) FEATURES: PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. The 6MR200A-4 midrange speaker is our solution for PRO Audio On Wheels for Car audio systems.6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile200 watts RMS program power gives capability of high acoustical output with small amplifierImpressive choice for high output, car audio, and custom systems – 4 Ohm ImpedanceSmooth response through the mid-bass and vocal range at at loudest volumesTo ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker GENERAL SPECIFICATIONSNominal Diameter6.5″ (165 mm)Nominal impedance4 OhmNominal Power Handling100 WattsContinuous Program Power (RMS)200 WattsMax Peak Power400 WattsSensitivity 2.00V at 1m94 dBRecommended Hi Pass Crossover* *For Full Power Handling150 Hz** **12db Per Octave CrossoverFrequency Response at -10dB155 – 11,000 HzVoice Coil Diameter1.5″ (38 mm)Voice Coil WireCopperVoice Coil Winding Depth8.0 mmFormer MaterialKaptonMagnetic Gap Depth5.5 mmFrame MaterialStamped SteelEXTRA INFOOverall Diameter6.59″ (167.5 mm)Front Mount Baffle Cutout5.69″ (144.5 mm)Mounting Depth2.24″ (57 mm)Overall Depth2.50″ (63.5 mm)Net Weight3.52 Lbs (1.60 kg)Shipping Weight3.79 Lbs (1.75 kg)Carton Dimensions W x L x H7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)

2x PRV Audio 6MR600X-NDY-4 4Ohm Neodymium Car Audio Midrange Speakers 1200W Pack

By |2026-07-23T03:09:30+00:00July 23rd, 2026|

Includes: 2x 6MR600X-NDY-4 Neodymium Midrange Loudspeakers Car Pro Audio 4 Ohm - 1200 Watts Package - 600 Watts each 6MR600X-NDY-4X-treme midrange performance is what the PRV Audio 6MR600X-NDY-4 is all about. The 6MR600X-NDY-4 from PRV Audio showcases the breakthrough advances of our product line like no other. After significant development, and assembling top of the line components, we have created a midrange loudspeaker that offers long lasting play, even during intense use, as well as outstanding durability.Highlights2″ Inside/Out voice coil wound on a hi-temp former, 4 Ohm600 Watts RMS Power Handling, with a 97.5 dB Sensitivity, capable of generating very high output!Low inductance and extended frequency response with wide directivityNew Generation of Neodymium Magnet StructureIdeal solution for compact full-range applications demanding high acoustic outputCoaxial Performance from a single speakerThis is the ultimate midrange loudspeaker, the 6MR600X-NDY-4’s output on upper midrange frequencies compares to a compression driver! The naturally damped paper cone gives this speaker the ability to reach up to 13,000Hz.Also, its extreme output eliminates the need for a high frequency compression driver in the system, providing 2-way coaxial performance from a single speaker!Its high energy, rare-earth neodymium motor, combined with other fine materials, were chosen to increase sensitivity and power handling to deliver the finest details in audio, as demanded by most audiophiles and custom builders in the car audio and motorcycle custom builders.This midrange takes performance to the next level with its wide frequency bandwidth, high output levels between 3,000 to 10,000Hz, and unbelievable 600 Watts RMS music power handling, completely eliminating the need for a compression driver on your system! This midrange incorporates a 2” double layered copper clad aluminum wire voice coil, and a symmetrical inductance profile. Its 11 mm winding length also ensures high heat dissipation and high sensitivity, even on high power, and with minimum distortionEverything about this speaker has been designed for reliable and consistent high output levels, even when driven to its limit, allowing you to achieve high fidelity sound at low distortion for the best possible listening experience.GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance4 OhmNominal Power Handling*300 WattsContinuous Program Power (RMS)**600 WattsMax Peak Power***1200 WattsSensitivity 2.83V at 1m97.5 dBRecommended Hi Pass CrossoverFor Full Power Handling160 Hz12db Per Octave CrossoverFrequency Response90 – 13,000 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCCAWVoice Coil Winding Depth11.0 mmFormer MaterialKaptonMagnetic Gap Depth8.0 mmFrame MaterialDie Cast AluminumEXTRA INFOOverall Diameter6.48” (164.5 mm)Front Mount Baffle Cutout5.63” (143 mm)Mounting Depth3.09” (78.5 mm)Overall Depth3.43” (87 mm)Net Weight4.63 Lbs (2.1 kg)Shipping Weight5.00 Lbs (2.3 kg)Carton Dimensions W x L x H7.0”x 7.0” x 4.25” (178 x 178 x 108mm)

4x PRV Audio 6MR200A Midrange ALTO Car Audio 6.5″ Speakers 8 Ohm 6MR PRO 800W

By |2026-07-23T10:46:12+00:00July 22nd, 2026|

INCLUDES: 4x 6MR200A PRV 6.5″ Midrange Speaker 6MR200A 8 Ohm - 800 Watts package - 200 Watts each speaker FEATURES: PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency.6.5″ PRO audio Midrange speaker designed for Low Frequencies with shallow profile200 watts RMS program power gives capability of high acoustical output with small amplifierImpressive choice for high output home, car, and professional audio systems – 8 Ohm ImpedanceSmooth response through the mid-bass and vocal range at at loudest volumesTo ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.PRV 6.5″ Midrange Speaker 6MR200A 200 Watts / 8 Ohm PRO Audio Loudspeaker GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance8 OhmsRated AES Power Handling (RMS)100 WattsProgram Power200 WattsSensitivity 2.83V at 1m94 dBRecommended Hi Pass Crossover**For Full Power Handling150 Hz****12db Per Octave CrossoverFrequency Response at -10dB155 – 11,000 HzVoice Coil Diameter1.5″ (38 mm)Voice Coil WireCopperVoice Coil Winding Depth8.0 mmFormer MaterialKaptonMagnetic Gap Depth5.5 mmFrame MaterialStamped Steel

PRV Audio 6.5″ Midrange Speaker Shallow Pro Car Audio 200 Watts 4 Ohm 6MR200A-4

By |2026-07-22T22:30:01+00:00July 22nd, 2026|

INCLUDES: 1x 6MR200A-4 PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts 4 Ohm FEATURES: PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. The 6MR200A-4 midrange speaker is our solution for PRO Audio On Wheels for Car audio systems.6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile200 watts RMS program power gives capability of high acoustical output with small amplifierImpressive choice for high output, car audio, and custom systems – 4 Ohm ImpedanceSmooth response through the mid-bass and vocal range at at loudest volumesTo ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression.The 6MR200A midrange speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth.This professional midrange speaker is purpose-built to cover from 100 Hz to 6,000 Hz in three-way speakers, but also works great as a midrange in a bass guitar speaker, as well as a woofer in two-way satellite speaker concept or even as a high output car audio door speaker.PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker GENERAL SPECIFICATIONSNominal Diameter6.5″ (165 mm)Nominal impedance4 OhmNominal Power Handling100 WattsContinuous Program Power (RMS)200 WattsMax Peak Power400 WattsSensitivity 2.00V at 1m94 dBRecommended Hi Pass Crossover* *For Full Power Handling150 Hz** **12db Per Octave CrossoverFrequency Response at -10dB155 – 11,000 HzVoice Coil Diameter1.5″ (38 mm)Voice Coil WireCopperVoice Coil Winding Depth8.0 mmFormer MaterialKaptonMagnetic Gap Depth5.5 mmFrame MaterialStamped SteelEXTRA INFOOverall Diameter6.59″ (167.5 mm)Front Mount Baffle Cutout5.69″ (144.5 mm)Mounting Depth2.24″ (57 mm)Overall Depth2.50″ (63.5 mm)Net Weight3.52 Lbs (1.60 kg)Shipping Weight3.79 Lbs (1.75 kg)Carton Dimensions W x L x H7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)