PRV Audio is proud to present our new MOTO Series MT6MR600CF-NDY-2, high performance 6.5″ speaker dedicated for motorsports installations, focused on utilizing all the power from a 2 or 4 channel amplifier, with 1 speaker per channel to match the amplifier’s lowest impedance and maximum power output.
INCLUDES: 1x 6MR500CF-NDY-4 Water Resistant Speaker 6" Neodymium Carbon Fiber Loudspeaker (SOLD IN PAIR) - Total of two speakers - 1000 Watts package - 500 Watts each speaker FEATURES: The MR500CF-NDY series was designed for Power sports applications, featuring a water-resistant design to ensure optimum performance taking into account the effects of the outdoor environment! Ideal for upgrading your sound system in your boat, UTV, 4-wheeler, or motorcycle, this midrange speaker becomes the new standard in vocal reproduction for outdoor applications. Constructed of high-end materials like a carbon fiber cone, high-temperature voice coil, and huge neodymium magnet, this driver produces natural sound with remarkably low distortion.Water Resistant with true PRO audio midrange performanceDamped carbon fiber cone lowers moving mass and minimizes unwanted resonancesLow inductance and extended frequency responsePowerful neodymium magnet structure features distortion-canceling fixturesFast transient response, minimal tonal coloration, and deep, dynamic midbassSold in pairs – Grill and screws are includedAlso available in 8″ –8MR600CF-NDY-4The tailored response of the 6MR500CF-NDY-4 comes from its exotic yet supremely engineered carbon fiber cone that delivers the signature PRV audio combination of depth and accuracy on vocal reproduction. Beyond good looks, this cone is extremely light, surprisingly rigid, and provides excellent damping to keep narrow peaks under control, resulting in an incredibly natural yet accurate sound.A rubber surround and large flat spider suspend the cone and keep it linear through the limits of excursion with minimal restriction, further improving dynamics and transients.The suspension design of this midrange features the single layer spider – which connects to the coil former with premium stitched lead wires, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling, complemented by a high-power neodymium radial slugs that immerse the voice coil in a strong magnetic field.You can expect excellent off-axis and transient response from this water-resistant midrange for a great sound stage and realistic sound reproduction.Built for loud, clear vocal performance in tight, compact spaces, PRV Audio’s 6MR500CF-NDY-4 neodymium-powered midrange features a sensitivity of 96 dB (2.83V/1m) and weighs about 3.85 pounds! 4 ohm impedance. PRO Audio On Wheels Series is dedicated to delivering outstanding pro audio performance to your motorsports application.A bumped back plate, vented magnet system, vented pole piece, high-temperature voice coil, allow for high power handling while protecting this driver from extreme transient power peaks.GENERAL SPECIFICATIONSNominal Diameter6″ (152 mm)Nominal impedance4 OhmNominal Power Handling250 WattsContinuous Program Power (RMS)500 WattsMax Peak Power1000 WattsSensitivity 2.83V at 1m96 dBRecommended Hi Pass Crossover** **For Full Power Handling95 Hz** **12db Per Octave CrossoverFrequency Response95 – 11,000 HzVoice Coil Diameter2.0″ (50.8 mm)Voice Coil WireCCAWVoice Coil Winding Depth10.0 mmFormer MaterialKaptonMagnetic Gap Depth7.0 mmFrame MaterialStamped SteelTHIELE-SMALL PARAMETERSEquivalent VolumeVas5.14 lExcursion (mathematical)***Xmax3.25 mmFree Air ResonanceFs92.5 HzMechanical FactorQms12.85Electrical FactorQes0.29Total FactorQts0.28Cone AreaSd143 cm²Mechanical MassMms16.49 gBl FactorBl10.73 TmDc ResistanceRe3.5 OhmsInductanceLe0.185 mH at 1 kHzMechanical Mass Without AirMmd15.52 gMechanical ComplianceCms0.179 mm/N EXTRA INFOOverall Diameter6.55″ (166.5 mm)Front Mount Baffle Cutout5.72″ (145.5 mm)Mounting Depth2.91″ (74 mm)Overall Depth3.29″ (83.5 mm)Net Weight3.85 Lbs (1.75 kg) unitShipping Weight9.15 Lbs (4.15 kg) pairCarton Dimensions W x L x H15.7″ x 8.26″ x 5.12″ (400 x 210 x 130 mm)
INCLUDES: 1x 8MR600X-NDY 8" High Power Neodymium Pro Audio Loudspeaker - 600 Watts FEATURES: X-treme midrange performance is what PRV Audio’s 8MR600X-NDY is all about.Made to be a class leading midrange in the pro audio realm, this speaker has a high output sensitivity of 98.5 dB and only weighs 5 pounds. This midrange loudspeaker is optimized for professional audio or (musical instrument) speaker system applications, and large car audio competition systems.The powerful halo neodymium magnet assembly assures high flux concentration. Its magnetic structure significantly improves thermal connection and heat dissipation. This increases power handling and lowers power compression, with an optimum power to weight ratio.Capable of high output and low distortion, this midrange is perfect for filling in the significant midrange response in any high output sound system. Great addition to the X- Series. 2″ DUAL layer CCAW voice coil wound on a Kapton former, 8 OhmThis specially designed loudspeaker is assembled with top of the line components for long lasting play, even during intense use.Low inductance and extended frequency response with wide directivity600 watts RMS continuous program power rating makes high acoustical outputIdeal solution for compact full-range applications demanding high acoustic outputDetailed vocal response and pristine instrument sound reproductionA coated woven surround offers smooth, precise geometry during hard play. The light weight cone provides excellent linear response taking performance to the next level with its wide frequency bandwidth, high output levels between 3,200 to 10,000HzMaking the 8MR600X-NDY an excellent solution for high sound quality two or three-way systems.Extreme car audio enthusiasts will find PRV Audio’s 8MR600X-NDY to be the perfect 8″ midrange door speaker, capable of handling up to 600 watts RMS power (with a suggested 125 Hz, 18 dB/octave high pass filter in place tuned with PRV DSP)!Its high energy, rare-earth neodymium motor, combined with other fine materials, were chosen to increase sensitivity and power handling to deliver the finest details in audio, as demanded by most audiophiles and custom builders in the car audio.PRV 8″ Midrange Speaker 8MR600X-NDY 600 Watts / 8 Ohm High Power Neodymium PRO Audio Loudspeaker GENERAL SPECIFICATIONSNominal Diameter8″ (203 mm)Nominal impedance8 OhmNominal Power Handling300 WattsContinuous Program Power (RMS)600 WattsMax Peak Power1200 WattsSensitivity 2.83V at 1m98.5 dBRecommended Hi Pass Crossover** **For Full Power Handling145Hz** **12db Per Octave CrossoverFrequency Response at -10DB95 – 10,500 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCCAWVoice Coil Winding Depth11.0 mmFormer MaterialKaptonMagnetic Gap Depth7.0 mmFrame MaterialDie Cast Aluminum THIELE-SMALL PARAMETERSEquivalent VolumeVas12.58 lExcursion (mathematical)***Xmax3.75 mmFree Air ResonanceFs87.6 HzMechanical FactorQms17.78Electrical FactorQes0.30Total FactorQts0.29Cone AreaSd232 cm²Mechanical MassMms19.73 gBl FactorBl15.17 TmDc ResistanceRe6.3 OhmInductanceLe0.03 mH at 1 kHzMechanical Mass Without AirMmd17.72 gMechanical ComplianceCms0.167 mm/N EXTRA INFOOverall Diameter8.11″ (206 mm)Front Mount Baffle Cutout7.16″ (182 mm)Mounting Depth3.45″ (87.6 mm)Overall Depth3.81″ (96.7 mm)Net Weight5.00 Lbs (2.26 kg)Shipping Weight5.55 Lbs (2.52 kg)Carton Dimensions W x L x H8.66″ x 8.66″ x 4.72″ (220 x 220 x 120 mm)
INCLUDES: 2x 8MR600X-NDY 8" High Power Neodymium Pro Audio Loudspeakers - 1200 Watts package - 600 Watts each speaker FEATURES: X-treme midrange performance is what PRV Audio’s 8MR600X-NDY is all about.Made to be a class leading midrange in the pro audio realm, this speaker has a high output sensitivity of 98.5 dB and only weighs 5 pounds. This midrange loudspeaker is optimized for professional audio or (musical instrument) speaker system applications, and large car audio competition systems.The powerful halo neodymium magnet assembly assures high flux concentration. Its magnetic structure significantly improves thermal connection and heat dissipation. This increases power handling and lowers power compression, with an optimum power to weight ratio.Capable of high output and low distortion, this midrange is perfect for filling in the significant midrange response in any high output sound system. Great addition to the X- Series. 2″ DUAL layer CCAW voice coil wound on a Kapton former, 8 OhmThis specially designed loudspeaker is assembled with top of the line components for long lasting play, even during intense use.Low inductance and extended frequency response with wide directivity600 watts RMS continuous program power rating makes high acoustical outputIdeal solution for compact full-range applications demanding high acoustic outputDetailed vocal response and pristine instrument sound reproductionA coated woven surround offers smooth, precise geometry during hard play. The light weight cone provides excellent linear response taking performance to the next level with its wide frequency bandwidth, high output levels between 3,200 to 10,000HzMaking the 8MR600X-NDY an excellent solution for high sound quality two or three-way systems.Extreme car audio enthusiasts will find PRV Audio’s 8MR600X-NDY to be the perfect 8″ midrange door speaker, capable of handling up to 600 watts RMS power (with a suggested 125 Hz, 18 dB/octave high pass filter in place tuned with PRV DSP)!Its high energy, rare-earth neodymium motor, combined with other fine materials, were chosen to increase sensitivity and power handling to deliver the finest details in audio, as demanded by most audiophiles and custom builders in the car audio.PRV 8″ Midrange Speaker 8MR600X-NDY 600 Watts / 8 Ohm High Power Neodymium PRO Audio Loudspeaker GENERAL SPECIFICATIONSNominal Diameter8″ (203 mm)Nominal impedance8 OhmNominal Power Handling300 WattsContinuous Program Power (RMS)600 WattsMax Peak Power1200 WattsSensitivity 2.83V at 1m98.5 dBRecommended Hi Pass Crossover** **For Full Power Handling145Hz** **12db Per Octave CrossoverFrequency Response at -10DB95 – 10,500 HzVoice Coil Diameter2″ (50 mm)Voice Coil WireCCAWVoice Coil Winding Depth11.0 mmFormer MaterialKaptonMagnetic Gap Depth7.0 mmFrame MaterialDie Cast Aluminum THIELE-SMALL PARAMETERSEquivalent VolumeVas12.58 lExcursion (mathematical)***Xmax3.75 mmFree Air ResonanceFs87.6 HzMechanical FactorQms17.78Electrical FactorQes0.30Total FactorQts0.29Cone AreaSd232 cm²Mechanical MassMms19.73 gBl FactorBl15.17 TmDc ResistanceRe6.3 OhmInductanceLe0.03 mH at 1 kHzMechanical Mass Without AirMmd17.72 gMechanical ComplianceCms0.167 mm/N EXTRA INFOOverall Diameter8.11″ (206 mm)Front Mount Baffle Cutout7.16″ (182 mm)Mounting Depth3.45″ (87.6 mm)Overall Depth3.81″ (96.7 mm)Net Weight5.00 Lbs (2.26 kg)Shipping Weight5.55 Lbs (2.52 kg)Carton Dimensions W x L x H8.66″ x 8.66″ x 4.72″ (220 x 220 x 120 mm)