Bazooka BT Series Bass Tubes are optimized for corner loading, so you can fully enjoy all that bass. Bass Tubes enclosures promote maximum efficiency. Optimized for corner loading for maximum bass output.
Up for sale is a Clarion SRC4694 single speaker. I took many pictures—you will get what you see.
Bazooka's Bass Tube subs concentrate the sub's output for maximum impact. With 100 watts RMS output, you'll get the low end you're looking for. Compact tube-shaped enclosure supplies concentrated bass.
AUTHENTIC AND BRAND NEW 4 PACK = 4 PIECES FAITAL PRO 6FE200 8 OHM VERSION. Faital Pro 6FE200 6" Mid-Range 260W Car Audio Speaker 8-Ohm Pro 3-Way Speaker ApplicationFaitalPRO's open back 6FE200 6" professional midrange speaker is purpose-built to cover the critical midrange in three-way speakers, but also works great as a door speaker in car audio applications. To ensure absolute signal fidelity, FaitalPRO built the 6FE200 with a strong ferrite ring-powered motor. Not only does this increase sensitivity, it keeps the Qts at a respectable figure of 0.67. Made in Italy. Nominal SpecificationsNominal Diameter160 mm (6 in)Overall Diameter167.4 mm (6.59 in)Bolt Circle Diameter154 mm (6.06 in)Baffle Cutout Diameter144 mm (5.67 in)Depth77 mm (3.03 in)Flange and Gasket Thickness8 mm (0.31 in)Net Weight2 Kg (4.4 lb)Shipping Box(Single Carton Box)190 x 185 x 103 mm(7.5 x 7.3 x 4.1 in)Shipping Weight2.2 Kg (4.9 lb)Technical ParametersNominal Impedance8 OhmMinimum Impedance6.8 OhmAES Power Handling (1)130 WMaximum Power Handling (2)260 WSensitivity (1W/1m)95 dBFrequency Range85÷6000 HzVoice Coil Diameter37 mm (1.46 in)Winding MaterialAlFormer MaterialKaptonWinding Depth12 mm (0.47 in)Magnetic Gap Depth8 mm (0.31 in)Flux Density1 TMagnetFerrite RingBasket MaterialSteelDemodulationNoCone Surround (3)M-RollNET Air Volume filled by Loudspeaker0.45 dm^3 (0.016 ft^3)Spider Profile1x constant height wavesThiele and small parametersFs120 HzRe5.9 OhmQes0.75Qms6.2Qts0.67Vas3.0 dm^3 (0.11 ft^3)Sd118 cm^2 (18.29 in^2)Xmax (4)4.67 mmXdamage (5)10.4 mmMms11.5 gBl8.2 N/ALe0.4 mHMmd11.1 gCms0.15 mm/NRms1.4 Kg/sEta Zero0.67 %EBP160 Hz(1) 2 Hours Test According to AES 2-1984 Rev. 2003(2) Maximum power is defined as 3dB greater than nominal power.(3) Treated Polycotton(4) Xmax= [(winding depth - magnetic gap depth)/2] + (magnetic gap depth/3)
Especially if it arrives broken, defective, or not to your liking in any way.
INCLUDES: 4x 6MR500-NDY-4 Midrange Loudspeaker 4 ohms The PRV Audio Pro Audio Loudspeaker, 6MR500-NDY 6MR500-NDY-4 and midrange woofer offers outstanding durability and a smooth full range response through 12,500kHz. This woofer is perfect for home Hi-Fi installs, including bookshelf, satellite, surround sound speakers and even the home studio monitors. It is a great option for three way cabinets requiring additional midrange support. The high end neodymium magnet assembly was chosen to increase sensitivity and power handling. This neodymium is attached to a sturdy reinforced cast aluminum frame to ensure a solid support structure for long lasting play in most any environment. Its light weight of only 3.3 lbs helps keep your enclosures light and is a great use for car audio installers looking for high SPL midrange and upper midrange responses. For car audio enthusiast, this model is also available in 4 ohms. GENERAL SPECIFICATIONS Nominal Diameter 6″ (152 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 250 Watts Program Power 500 Watts Sensitivity 2.00V at 1m 96 dB Recommended Hi Pass Crossover** **For Full Power Handling 220 Hz** **12db Per Octave Crossover Frequency Response at -10dB 90 – 13,000 Hz Voice Coil Diameter 2″ (50 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 11.2 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Die Cast Aluminum
Product SKU: PIO-TS-G4620S BUSINESS HOURS:Mon-Fri , 9am-6pm PST General Features:6" x 8" Kappa Series 2-Way Car SpeakersPower Handling:Peak: 360W per pair / 180W eachRMS: 120W per pair / 60W eachGlass fiber Plus One woofer coneRubber surroundLow impedance design gets more out of your stereo or amplifierEdge-driven soft-dome tweetersGap switchable crossovers3-Way upgradeable1.3" Oversized voice coilTop-mount Depth: 2.32"Cutout Dimensions: 7.1" x 4.8"2.5 ohms impedanceFrequency Response: 75 - 25000 HzSensitivity: 94dB Payment Information: We accept PayPal for all eBay orders. You can use your credit through PayPal as all major credit cards are accepted by PayPal. We accept PayPal for all international orders; your address must be verified with PayPal. We are NOT responsible for any custom duties or brokerage fees that may apply for all international orders. When you click on the Buy it Now button you are entering into a contract whereby you agree to purchasing the item at the price listed (including the shipping fee). A sales tax of (9.75%) will be applied to all California residents. If you want to ship your item to an alternate address please add that address on your PayPal account and use the address as the default or confirmed address to pay us through PayPal. Shipping Information: We will ONLY ship to a confirmed shipping address listed on your PAYPAL account!! Techronics.com can not sell KICKER products to the European Union. US Residents All US orders with a physical address will be shipped using UPS GROUND Service, unless a different shipping method was chosen (All shipping method Include Insurance). Free shipping only applies to the 48 states. All US orders with a PO BOX address will be shipped using USPS Priority Mail (Insurance Included). A surcharge fee will apply to your shipping rate. Please contact us for exact quote. Alaska, Puerto Rico, Hawaii, Residents All AK, PR and HI orders, a shipping surcharge will apply to your order. The surcharge amount is listed in the listing's shipping information tab. All AK, PR and HI orders using ground services will be shipped by USPS Priority Mail (Insurance Included). A tracking number will be provided through email upon shipment. APO/FPO, Virgin Islands, Guam and All Other U.S. Territories All US Territory orders, a shipping surcharge will apply to your order. Please contact us for shipping quotes. All US Territory orders using ground services will be shipped by USPS Priority Mail (Insurance Included). A tracking number will be provided upon shipment via email and eBay order. All International Residents All International Residents shipping fees are listed in the listings shipping information tab. All International Orders will be shipped via USPS Priority mail International (Insurance Included). A tracking number will be provided upon shipment via email and eBay order. Customs Duties and Taxes We are not responsible for any custom duties, taxes, brokerages fees (Ground shipping to Canada) and the like for our international customers that your country/government imposes to you. Return Policy Return for Refund / Store Credit All products that are being returned for Refund or Store Credit are accompanied by a 20% to 60% Restocking Fee (calculated upon inspection of the returned item). The item must be in BRAND NEW Condition. No components missing (i.e. screws, bass knobs, plastic coverings, protective films, etc.) Failure to meet any of these requirements will result in a higher restocking fee or denial of return request. Store credit could be used towards purchase of any products of Techronics-Store. Shipping & handling charges are non-refundable. All refunds or store credits will be computed based on the unit cost. Products purchased with “Free Shipping” will have the UPS Rate deducted from their refund. Return Procedure Please message us for RMA procedures. Write the RMA number outside of the shipping box to where it is visible upon arrival. Any box without a visible RMA may result in refusal by our receiving department. Put the completed RMA FORM inside the box with your item. Any returned item without the completed form will result in delay in processing your request. Please send the item back to us in a standard shipping box with insurance. We are not responsible for any damage or missing items during shipment of the package. Copyright © Techronics-Store 2018
INCLUDES: 2x 69MR500-4-BULLET 6x9" Mid Range Bullet Loudspeaker Package of 1000 Watts - 500 Watts per speaker Features The MR BULLET was conceived with one goal in mind: High-Performance! Featuring an Aluminum Phase Plug (Bullet), this mid is built like a professional mid range loudspeaker, but it has been designed for use in the mobile audio market, as we called it Pro Audio On Wheels®!! By combining elements from PRO Audio and Car Audio, we have developed a NEW type of high efficient mid range that is able to give high levels of output for your custom door or rear deck. Highlights Built to Perform at Wide Frequency Range: 145 – 12,500 Hz Highest Quality Speaker with bullet design available High efficiency: 96 dB guarantees High Output Levels Handles 500 Watts – Endurance at Loudest Volumes Vented Air pole piece for heat dissipation Center phase plug for even sound distribution 4 Ohms Impedance Also available in 6.5″- 6MR400-4 BULLET and 8″- 8MR500-4 BULLET The “bullet” phase plug is made from pure aluminum acting as a radiator cooling system for the voice coil and machined to perfection for even sound dissipation. Beyond good looks, this cone is extremely light, providing excellent damping to keep an incredibly natural yet accurate sound. A triple roll cloth surround, combined with an optimized fiber pressed paper cone, ensure the speaker’s frequency response is smooth and extends to a high range making an easy transition to a super tweeter, but according to customers, the high-frequency response from this speaker does NOT need support from a tweeter! The suspension design of this mid range features a single layer spider – which connects to the coil former with premium stitched lead wires, all being driven by a copper-clad aluminum wire voice coil providing high efficiency and excellent power handling. Its high-performance characteristics and high-quality components provide exceptional clarity, detail, and dynamics sound. You can expect outstanding sound stage quality and realistic sound reproduction for a great value. This is the new standard of value in high-performance bullet speakers. Built to perform and able to handle 500 watts of continuous power, this mid range is the perfect option to replace that old 2-way or 3-way coaxial speakers. Engineered and designed to transform a stock system into a concert level, ideal for audiophiles seeking tremendous output without radical modifications. Technical Details GENERAL SPECIFICATIONS Nominal Diameter 6×9″ (152 x 228 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 250 Watts Program Power 500 Watts Sensitivity 2.83V at 1m 96 dB Recommended Hi Pass Crossover** **For Full Power Handling 145 Hz** **12db Per Octave Crossover Frequency Response at -10dB 150 – 12,500 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 9.5 mm Former Material Kapton Magnetic Gap Depth 6.0 mm Frame Material Stamped Steel EXTRA INFO Overall Diameter 6.43″ x 9.29′ (163.5 x 236 mm) Front Mount Baffle Cutout 5.78″ x 8.60″ (150 x 218.5 mm) Mounting Depth 3.48″ (88.5 mm) Overall Depth 3.85″ (98 mm) Net Weight 4.4 Lbs (2.00 kg) unit Shipping Weight 4.62 Lbs (2.10 kg) Carton Dimensions W x L x H 8.66″ x 7.48″ x 4.33″ (220 x 190 x 110 mm)
INCLUDES: 4x TPT-MR6-4 BULLET 6.5" Midrange Car Speakers 4 Ohm - 2000 Watts package - 500 Watts each speaker FEATURES: TPT-MR6-4 BULLET 6.5” Midrange Bullet Car Speaker 4 Ohm Shallow MountUsing the latest technology from PRO audio and stadium systems, we have developed this midrange speaker that will fill your vehicle with warm midrange detail regardless of volume!The large motor and tight suspension of the Pro Audio 6.5″ BULLET SPEAKER adds powerful vocals enough to keep up in the loudest of SPL applications.HIGH PERFORMANCE: Experience exceptional sound quality with TIMPANO speakers 6.5 inch midrange speaker, perfect for car audio applications. Elevate your audio experience to new heights.SHALLOW MOUNT DESIGN: The slim profile of our 6.5 Midbass speakers allows for easy installation in tight spaces, such as car doors. Enjoy powerful and immersive audio without compromising on space.PREMIUM SOUND 6.5 DOOR SPEAKERS: High efficiency allows more output and high-impact sound. Engineered to reproduce music with precision, ensuring every note is heard with exceptional clarity.RECOMMENDED AMP: Recommended power range: 25 – 200 watts RMS per channel like the TPT-1000.4 PERFECT FOR CAR STEREO: With an amazing combination of value and technology for 3-Way systems ( Subwoofer, Mid & Tweeter )If your system is already strong in the highs and lows, a Pair of these loud speakers in your car will really fill out the sound.Engineered to be efficient without sacrificing power or performance, this driver utilizes an extremely efficient ferrite motor and high temperature voice coil, bringing to you a suitable option to upgrade your system to a high level of performance and SPL output at a reasonable price.Specs:500 Watts Max Power150 Watts RMS PowerImpedance: 4 OhmSensitivity: 94 dBFrequency Response: 160 – 9,500 HzVoice Coil: 1.5”Shallow Steel Basket with High Strength Ferrite MagnetRecommended High Pass Filter with TPT-SP4BT DSP:180 Hz under 250 Watts of Amplifier RMS Power with 18dB Slope140 Hz under 150 Watts of Amplifier RMS Power with 12dB SlopeSizing:Mounting Depth: 2.20”Mounting Cutout Diameter: 5.75″Overall Diameter: 6.56″Weight: 3.40 Lbs
INCLUDES: 4x 6MR200A-4 6" MID RANGE LOUDSPEAKERS 4 Ohm FEATURES: The 6MR200A-4 mid range speaker is the evolution of the 6MR250A, this unit was designed with the goal of producing the highest possible output from a compact design without sacrificing performance, with only 2.24″ mounting depth. To ensure absolute signal fidelity, a cloth sealed surround is combined with a carefully crafted Kevlar-loaded paper cone. Additionally, a vented pole piece allows heat to escape for reduced power compression. Use this midrange in professional 3-way live sound cabinets, as a high output car audio door speaker, or as a midrange in a bass guitar speaker. Highlights Nominal Impedance: 4 Ohms Rated AES Power Handling (RMS): 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 94 dB Voice Coil Diameter: 1.5″ Technical Details GENERAL SPECIFICATIONS Speaker Size 6.5″ Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 100 Watts Program Power 200 Watts Sensitivity 2.00V at 1m 94 dB Recommended Hi Pass Crossover* *For Full Power Handling 150 Hz** **12db Per Octave Crossover Frequency Response at -10dB 155 – 11,000 Hz Voice Coil Diameter 1.5″ (38 mm) Voice Coil Wire Copper Voice Coil Winding Depth 8.0 mm Former Material Kapton Magnetic Gap Depth 5.5 mm Frame Material Stamped Steel EXTRA INFO Overall Diameter 6.59″ (167.5 mm) Front Mount Baffle Cutout 5.69″ (144.5 mm) Mounting Depth 2.24″ (57 mm) Overall Depth 2.5″ 63.5 mm) Net Weight 3.52 Lbs (1.60 kg) Shipping Weight 3.79 Lbs (1.75 kg) Carton Dimensions W x L x H 7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)