PRV Audio is proud to present our new MOTO Series MT6MR600CF-NDY-2, high performance 6.5″ speaker dedicated for motorsports installations, focused on utilizing all the power from a 2 or 4 channel amplifier, with 1 speaker per channel to match the amplifier’s lowest impedance and maximum power output.
Easy Installation with Mounting Plate:The switch requires a standard 5/8" (0.625") mounting hole and can be easily installed on panels up to 3/8" thick.
Easy Installation with Mounting Plate:The switch requires a standard 5/8" (0.625") mounting hole and can be easily installed on panels up to 3/8" thick.
Easy Installation with Mounting Plate:The switch requires a standard 5/8" (0.625") mounting hole and can be easily installed on panels up to 3/8" thick.
INCLUDES: 4x 8MR600X-4 8" MIDRANGE LOUDSPEAKER FEATURES: X-treme mid range performance is what PRV Audio’s 8MR600X-4 is all about. Made to be a class leading mid range in the car audio realm, this driver has a sensitivity of 98 dB and only weighs 7 pounds. This low frequency driver is optimized for custom car audio applications to perform best on very small enclosures, a pro audio version is available at 8ohms 8MR600X The powerful magnet assembly assures high flux concentration. The ventilated basket designed between the basket and the magnetic structure significantly improves thermal connection and heat dissipation, further increasing power handling and lowering power compression. Capable of high output and low distortion, this mid range is perfect for filling in the important mid range response in any high output sound system. Highlights 2″ DUAL layer CCAW voice coil wound on polyimide former, 4 ohms Ventilated voice coil gap reduces power compression High Xmax for more Mid bass output 600 watts continuous program power rating makes high acoustical output Excellent performance in compact enclosures Unique double roll dimple suspension design The 51 mm (2 in) copper clad aluminum wire is wound in a double layer using a high temperature resin adhesive on a strong polyimide former and features a generous 14.2 mm winding length for extended Xmax and less distortion. The 2″ voice coil also ensures high heat dissipation and the necessary motor strength to deliver high sensitivity even on high power with the minimum distortion. A Qts of 0.37 and an unique double roll dimple suspension design allows for a flat response from 200Hz to 2500Hz, even at high excursion controlling well its natural paper cone at its 5.10 mm Xmax. Its composite cone is built with non-pressed paper (visible on the back side) for reduced break-up and smooth sound. Its extended frequency response up 8,500hz makes this mid range driver a perfect to combine with any Super Tweeter Technical Details GENERAL SPECIFICATIONS Nominal Diameter 8″ (203 mm) Nominal impedance 4 Ohms Rated AES Power Handling (RMS) 300 Watts Program Power 600 Watts Sensitivity 2.83V at 1m 98 dB Recommended Hi Pass Crossover** **For Full Power Handling 160 Hz** **12db Per Octave Crossover Frequency Response at -10dB 85 – 8,500 Hz Voice Coil Diameter 2.0″ (51 mm) Voice Coil Wire CCAW Voice Coil Winding Depth 14.2 mm Former Material Polyimide Magnetic Gap Depth 8.0 mm Frame Material Die cast aluminum EXTRA INFO Overall Diameter 8.21” (208.5 mm) Front Mount Baffle Cutout 7.29” (185.3 mm) Mounting Depth 3.75” (95.5 mm) Overall Depth 4.03” (102.5 mm) Net Weight 7.04 Lbs (3.20 kg) Shipping Weight 11.90 Lbs (3.45 kg) Carton Dimensions W x L x H 8.85” x 8.85” x 4.92” (225 x 225 x 125 mm)
INCLUDES: 2x D3220Ph-Nd 2″ Midrange Neodymium Driver 8 Ohm - 600 Watts package - 300 Watts each driver FEATURES: Innovative technology for 3 inch compression drivers, featuring Powerful neodymium motor for minimal size and weight, allows you to keep a large voice coil without sacrificing performance.The D3220Ph-Nd is our best driver for vocal reinforcement in car audio systems due to its impressive power-to-size ratio and ability to deliver low midrange response from 650 to 7,500Hz, pure midrange vocal reproduction.With this innovative technology, car audio enthusiasts can now build 3 or 4-Way Systems with more sound quality and performance in their vehicles.With a nearly indestructible phenolic diaphragm and a 3 inch voice coil, this Brazilian technology delivers natural vocal midrange response at an efficient of 109 dB sensitivity.Extremely powerful neodymium magnet for minimal size and weight without sacrificing output capabilityWorks great with any Shallow Horn from WGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver designed for vocal reinforcement on 3-Way car audio systems with a usable frequency response from 600 to 7,500 HzPRO Audio midrange driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ph-Nd neodymium phenolic compression horn driver, offers the best performance for size ratio, features a powerful neodymium magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 4.88″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series. TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.The phenolic diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 800 Hz at 12 dB per octave filter Crossover / BT12700 Hz at 18 dB per octave filter Crossover / BT18Its compact size combined with high power handling provides great output capabilities make this midrange driver one of the smallest 2” exit vocal driver in the market!PRV D3220Ph-Nd 2″ Midrange Neodymium Driver 300 Watts 8 Ohm – TRIO Phenolic Diaphragm 3” Voice Coil, High Performance and LightweightGENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m109 dBRecommended Hi Pass CrossoverFor Full Power Handling800 Hz12db/oct CrossoverFrequency Response at -10dB600 – 7,500 HzVoice Coil Diameter3” (76.2 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolicFlux Density1.80 TMagnet MaterialNeodymium Overall Diameter4.88″ (124 mm)Overall Depth2.21″ (56 mm)Mounting Bolt circleM6 x 4″ (102 mm)Net Weight5.0 lbs (2.27 kg)Shipping Weight5.27 lbs (2.39 kg)Carton Dimensions W x L x H5.90” x 5.31” x 3.15”(150 x 135 x 80 mm)
INCLUDES: 4x D3220Ph-Nd 2″ Midrange Neodymium Driver 8 Ohm - 1800 Watts package - 300 Watts each driver FEATURES: Innovative technology for 3 inch compression drivers, featuring Powerful neodymium motor for minimal size and weight, allows you to keep a large voice coil without sacrificing performance.The D3220Ph-Nd is our best driver for vocal reinforcement in car audio systems due to its impressive power-to-size ratio and ability to deliver low midrange response from 650 to 7,500Hz, pure midrange vocal reproduction.With this innovative technology, car audio enthusiasts can now build 3 or 4-Way Systems with more sound quality and performance in their vehicles.With a nearly indestructible phenolic diaphragm and a 3 inch voice coil, this Brazilian technology delivers natural vocal midrange response at an efficient of 109 dB sensitivity.Extremely powerful neodymium magnet for minimal size and weight without sacrificing output capabilityWorks great with any Shallow Horn from WGP14-50X Series – Perfect as compression driver for car audio. Mounting hardware is included.2 Inch Exit horn Driver designed for vocal reinforcement on 3-Way car audio systems with a usable frequency response from 600 to 7,500 HzPRO Audio midrange driver, able to handle 300 Watts Continuous Program Power (RMS) with music for extreme output capability.The D3220Ph-Nd neodymium phenolic compression horn driver, offers the best performance for size ratio, features a powerful neodymium magnet motor.This allows you to use this horn driver in custom doors and stuntwall systems for vocal reinforcement. We have created a compact and powerful driver that solves the critical component spacing and weight issue in large systems.The special diameter allows front mounting, making it easy to install, without detaching the driver from any WGP14-50 Horn. The driver diameter measures only 4.88″ having enough clearance to fit inside the 5.75″ baffle cut needed for our 2″ exit horns from the WGP14-50 Series. TRIO by PRV uses the latest Brazilian phenolic technology designed for vocal reproduction.The phenolic diaphragm is attached to a 3″ diameter copper-clad aluminum wire with Kapton® former for a high 300 Watts RMS musical power handling, when used with recommended HPF using PRV Digital Signal Processor DSP. 800 Hz at 12 dB per octave filter Crossover / BT12700 Hz at 18 dB per octave filter Crossover / BT18Its compact size combined with high power handling provides great output capabilities make this midrange driver one of the smallest 2” exit vocal driver in the market!PRV D3220Ph-Nd 2″ Midrange Neodymium Driver 300 Watts 8 Ohm – TRIO Phenolic Diaphragm 3” Voice Coil, High Performance and LightweightGENERAL SPECIFICATIONSExit Throat Diameter2” (50 mm)Nominal impedance8 OhmNominal Power Handling*150 WattsContinuous Program Power(RMS)**300 WattsMax Peak Power***600 WattsSensitivity 2.83V at 1m109 dBRecommended Hi Pass CrossoverFor Full Power Handling800 Hz12db/oct CrossoverFrequency Response at -10dB600 – 7,500 HzVoice Coil Diameter3” (76.2 mm)Voice Coil WireCopperVoice Coil Former MaterialKaptonDiaphragm MaterialPhenolicFlux Density1.80 TMagnet MaterialNeodymium Overall Diameter4.88″ (124 mm)Overall Depth2.21″ (56 mm)Mounting Bolt circleM6 x 4″ (102 mm)Net Weight5.0 lbs (2.27 kg)Shipping Weight5.27 lbs (2.39 kg)Carton Dimensions W x L x H5.90” x 5.31” x 3.15”(150 x 135 x 80 mm)
【Efecto estéreo RMS 40Wx2】-- ¡Este pequeño amplificador Bluetooth ofrece una gran potencia para su tamaño! Su tamaño compacto lo hace fácil de manejar. 【Bluetooth/RCA/USB/Tarjeta SD/2 entradas de micrófono/FM】-- Puedes conectarlo a tus dispositivos de streaming de música, como PC, móvil o portátil, ya sea con conexión Bluetooth, entrada RCA y de micrófono.
Facmogu 298A Bluetooth Audio Amplifier. It also supports USB Port, SD/TF Card port & FM Radio. (NOTE 2: The frequency range of the radio reception is 87.5-108MHz.). Other Special Features of the Product SD Card Input.
Power amplifier chip: original TPA3255. No input anti reverse protection, positive and negative poles cannot be reversed! Speaker: 3-8 ohms, 50-300W in BTL dual channel mode; 2-8 ohms, 100-600W in PBTL mono mode.