2PCS10DB Silver Attenuator 100Watt 10dB Attenuators Flanged DC-3GHz 50Ohms HOT
2 x 10dB Attenuators. Attenuation Value: 10dB. Color: Silver. Nominal Impedance:50ohms ±5%. Attenuation Tolerance:± 0.8dB. Temperature Coefficient: ≤150ppm/℃.
**BNC Female Jack Bulkhead Mount RF Connector - 50é â 1/2/5/10 Packs** Upgrade your radio setup with our BNC Female Jack Bulkhead Mount RF Connector. Designed for seamless installation in CB radios, HAM systems, and CCTV setups, this reliable connector features a rear solder cup terminal for a low-loss, permanent connection. **Key Features:** - **Panel-Mount Design:** Securely installs through your chassis with included mounting hardware. - **Durable Build:** Nickel-plated brass body for long-lasting performance. - **Optimal Signal Transfer:** Silver-plated contacts ensure low resistance. - **Versatile Packs:** Available in 1, 2, 5, or 10-piece options to suit your needs. **Specifications:** - **Impedance:** 50é - **Frequency Range:** DC â 4 GHz - **Includes:** Mounting nut and lock washer.
US Made LMR-240 (LSR-240) N MALE to N FEMALE Coax Cable 50 Ohms. Connector 2: N Female. Connector 1: N Male.
The CT Sounds Meso 25mm tweeters are 100-watt flush-mount silk-dome tweeters engineered to provide an accurate reproduction of your favorite tracks. The 1-inch tweeters feature a CCAW voice coil suspended in ferrofluid and a neodymium magnet which allows the car tweeters to recreate vocals and other high frequencies like never heard before. Furthermore, these 25mm silk-dome tweeters are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp. Included in the set: (2) 25 mm silk-dome tweeters, (2) ABS crossover boxes, and (2) tweeter connecting wires.Technical Specifications:Tweeter size: 25mm / 1"Tweeter type: Silk-dome (Flush mount)Impedance per tweeter: 4-OhmPower per tweeter: 25W (RMS) | 50W (MAX)Total system power: 50W (RMS) | 100W (MAX)Tweeter:Sweep voltage: 2.8 VOutput SPL (@1w/1m): 90 dBFrequency response (@SPL -10dB): 1.5 kHz ~ 21 kHzResonant frequency: 2 kHzMagnet type: N38H NeodymiumCrossover:Crossover circuit: 4μF / 100VCrossover point: 3.5 kHzFilter for tweeter: 12 dBMounting / Installation Parameters:Cutout diameter: 47mm / 1.85"Outer diameter: 55mm / 2.17"Mounting depth: 16mm / 0.63"
RFC240 Low Loss Coaxial Cable.
Tested and found to be working.
US Made LMR-240 SMA MALE to SMA MALE Coax Cable 50 Ohms Solid Copper Center Conductor with Single Plus Foil Shield 100% tested and ready for use! Various Lengths Available.
One New 800 Watt Hybrid 50 ohm Load Resistor good to 500 MHz This auction is for one piece of hybrid 50 ohm terminating load resistors rated at 800 watts continuous power dissipation when installed on an appropriate heat sink. It is a solder in type part with no RF connectors, and 1500 watts PEP for short periods. They measures approximately 2 inch long x 1 inch wide x .25 inch high and are rated up to 500 MHz with a VSWR of less than 1.3. For pulse operation, the part is rated at 8000 watts for 1% duty cycle and pulses less than 100 microseconds. These parts are good to build your own load or for terminating isolator circuits on RF amplifiers. The parts are new and guaranteed good or your money back. This is inventory from Henry Radio in Los Angeles, California. Shipping anywhere in the continental US is FREE. Pay me securely with any major credit card through PayPal!
Shop by category Home About Feedback Newsletter Contact Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
Nominal Impedance: 50ohms. 1 x 3DB Attenuator. Attenuation Value: 3dB. Temperature Coefficient: less than equal 150ppm/℃.