counter for wordpress

2x DS18 PRO-TWN2 3″ Car Bullet Super Tweeter 4-ohm Neodymium Neo Horn Speaker

By |July 23rd, 2026|

2) DS18 PRO-TWN2 3" Car Bullet Super Tweeters 200 Watt 4-ohm Neodymium Horn Speakers (2-Pack) KEY FEATURES3" DIAMETERHIGH COMPRESSION TWEETER4 OHMCOMPOSITE POLYIMIDE DIAPHRAGM1" VOICE COIL DIAMETERNEODYMIUM MAGNET COMES WITH 3 YEAR WARRANTY DS18’s new PRO-TWN2 has all the looks of a driver but has been compactly sized to fit into super tweeter dimensions. This new super tweeter’s 1-inch voice coil can handle 100w RMS and 200W peak and comes with a neodymium magnet which increases the tweeters efficiency and lowers the weight dramatically. Each tweeter comes with an included bass blocker for extra protection against frequencies that would otherwise damage the tweeter so you can feel safe your equipment can play loud and long. These tweeters have a very high sensitivity of 107DB so the do not require full power to get extremely loud. This opens you up to multiple amp choices for your tweeters and gives you the versatility everyone looks for in powering and using your new tweeters. Features: Black Die Cast Aluminum Basket with High Strength Neodymium Magnet 1" High-Temperature CCAW Voice Coil with Included Capacitor Crossover Specifications: Rms Power: 100 Watts Each Peak Power: 200 Watts Each Tweeter Size: 3″ Voice Coil: 1″ CCAW Impedance: 4-ohm Frequency Response: 1KHZ – 20KHz Sensitivity: 107dBSold as pair Measurements: Baffle Cut Out: 2.36" Overall Diameter: 2.99" Mounting Depth: 2.01″ THIS LISTING IS FOR (2) DS18 PRO-TWN2 BLACK BULLET TWEETERS Factory Refurbished 3 Year Warranty Comes with 3 year StereoNeeds warranty. For any warranty issues please contact us. Our company has been in the stereo business for over 20 years We have sold on EBAY since 2000, so please bid with confidence. We have a 99% positive feedback rating on EBAY! We have very prompt shipping. We will gladly answer any technical questions you have. If you have any questions, problems, warranty issues, or concerns please contact us.

DS18 PRO-TWN4 3″ Neodymium Bullet Tweeter 4 Ohm 1″ VC Super Loud Horn Speaker

By |July 23rd, 2026|

DS18 PRO-TWN4 3" 280 WATT SUPER TWEETER WITH BULLET & NEO MAGNET WITH BUILT IN CROSSOVERKEY FEATURES3" DIAMETERHIGH COMPRESSION TWEETER4 OHMPEN DIAPHRAGM1" VOICE COIL DIAMETERNEODYMIUM MAGNET COMES WITH YEAR WARRANTY DS18 PRO-TWN43" High Compression Neodymium Hybrid Driver/Tweeter 280 Watts 1" Pen 4-Ohm VcIntroducing DS18’s PRO-TWN4: a high compression hybrid tweeter/driver that boasts a robust 1" voice coil capable of handling 140W RMS and an impressive 280W of MAX power.Crafted with the audiophile in mind, the PRO-TWN4 is engineered to deliver extraordinary performance. Its neodymium magnet not only enhances efficiency but also significantly reduces weight, ensuring optimal sound reproduction without compromising structural integrity.But power is not the only virtue of the PRO-TWN4; it excels in versatility as well. With a sensitivity rating of 105 dB, these tweeters offer incredible loudness even at lower power levels. You will be amazed by the depth and richness of your audio, without the need for excessive amplification. DS18 products give you the freedom to choose from a range of amplifier options, knowing that your tweeters will shine in any setup.Safety is paramount, and DS18 understands the importance of protecting your investment. Each PRO-TWN4 comes with an included bass blocker, shielding your tweeter from harmful frequencies that could otherwise damage it. Feel confident knowing that your equipment can handle the rigors of intense audio performance, allowing you to unleash your creativity without boundaries.Repairing your PRO-TWN4 is a breeze, thanks to its user-friendly design. In a matter of minutes, you can restore your tweeter to its full glory, ensuring that your audio experience remains uninterrupted. With DS18, you not only receive exceptional performance, but also the convenience of easy maintenance.Unleash the power of the PRO-TWN4 and experience audio excellence like never before. Model: PRO-TWN4 Type: Super Bullet Tweeter RMS Power: 140 Watts MAX Power: 280 Watts Voice Coil Diameter: 1" Diaphragm Material: Composite Polyimide Sensitivity: 105 dB Impedance: 4 Ohms Frequency Response: 1.5KHz - 20KHz Package Quantity: 1 Replacement Diaphragm: PRO-TWN4VC Magnet Neodymium Measurement Overall Diameter 2.95" Overall Depth 1.87" Front Mount Baffle Cutout 2.04" Mounting Depth 1.16" Specifications: Rms Power: 140 Watts Peak Power: 280 Watts Tweeter Size: 3" Voice Coil: 1" VC Impedance:4-ohm Frequency Response: 1.5Hz - 20KHz Sensitivity:105dB Sold Individually Measurements: Baffle Cut Out: 2.04" Overall Diameter: 3" Mounting Depth: 1.16" THIS LISTING IS FOR (1) DS18 PRO-TWN4 NEODYMIUM BULLET TWEETER Factory Refurbished 3 Year Warranty Comes with 3 year StereoNeeds warranty. For any warranty issues please contact us. Our company has been in the stereo business for over 20 years We have sold on EBAY since 2000, so please bid with confidence. We have a 99% positive feedback rating on EBAY! We have very prompt shipping. We will gladly answer any technical questions you have. If you have any questions, problems, warranty issues, or concerns please contact us.

(2) 2″ NEODYMIUM TITANIUM DRIVER TIMPANO 200W TPT-D3200TI-ND 8Ω PRO AUDIO – PAIR

By |July 23rd, 2026|

INCLUDES: 2x TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Drivers Description TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver For a high output compression driver to be used for the critical mid range high (vocals), choose Timpano’s D3200TI-ND titanium compression driver. A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds. Recommended High Pass Filter – 1600 Hz at 12dB / Octave Crossover Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible. When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range. The high energy motor is also response for output up to 110 dB with only one watt of input power. Designed and Engineered by PRV Audio Group. Replacement Diaphragm are available at TPT-RPD3200TI-ND Timpano Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use. Technical Details GENERAL SPECIFICATIONS Neodymium Titanium Driver 200 Watts Continuous Power 100 Watts RMS Power Impedance: 8 Ohms Sensitivity: 110 dB Frequency Response: 1600Hz – 19000Hz 2″ Exit Throat Diameter 3″ Voice Coil Titanium Diaphragm Weight: 3.92 Lbs (1.78 Kg)

(2) 10″ MIDRANGE TIMPANO 1000W TPT-MD10 PRO 8 OHM CAR PRO AUDIO SPEAKERS – PAIR

By |July 23rd, 2026|

INCLUDES: 2x TPT-MD10 Pro 10″ Pro Audio Mid Range Loudspeaker Car Audio | Pro Audio TPT-MD10 Pro 10″ Pro Audio Midrange Loudspeaker The TPT-MD10 PRO is a very high efficiency 10″ driver for professional mid range speaker applications. It features a 3″ copper voice coil and a low-mass yet stiff cone to help provide clean, detailed and high-impact sound reproduction. This Italian-Designed 10″ pro PA speaker is built with the finest components available in the pro audio market. Its aluminum demodulation ring in the motor reproduces audio accurately at concert-level volume. Capable of handling 1000 WattsImpressive 100 dB sensitivity for maximum outputLarge vented ferrite motor for increased output and power handlingAluminum demodulating ring allows for a very low distortion output Specs: 1000 Watts Max Power 400 Watts RMS Power Impedance: 8 Ohm Sensitivity: 100 dB Frequency Response: 80 – 4,000Hz Voice Coil: 3” Recommended High Pass Filter: 125 Hz under 500 Watts of Amplifier RMS Power with 18dB Slope 120 Hz under 400 Watts of Amplifier RMS Power with 12dB Slope Sizing: Mounting Depth: 4.45” Mounting Cutout Diameter: 9.09″ Overall Size: 10.29″ x 10.29″ x 5.06″ Weight: 16.00 Lbs

2x PRV 240W Shallow Super Tweeter Small Neodymium TW400Ti-Nd-4 SLIM WHITE 4 Ohm

By |July 23rd, 2026|

Compact Neodymium Bullet Super TweeterIncludes: PAIR of Tweeters - Model: TW400Ti-Nd-4 SLIM WHITE The PRV Audio TW400Ti-Nd-4 SLIM WHITE Super Tweeter offers a smooth response and extremely high efficiency from high mid range through high range frequencies. This compact tweeter is part of a wide family from the TW400Ti-Nd Series, featuring a strong neodymium motor which increases its efficiency and lowers its weight ans size dramatically without compromising any performance. Highlights Designed to fit in tight spaces without any major modificationsTitanium diaphragm for an accurate and detailed responseDesigned to add high output, high frequency response to any interior systemHidden push terminal connection, takes less space on installationBuilt-in capacitors act as a crossover and attenuates the low frequencies for smooth frequency responseAble to take a ton of power! Up to 120 watts RMS of power handling are on tap with a 12 dB/octave crossover at 6,000 HzSold in Pairs – Mounting Screws are included, Also available in Black After several months of research and development, we were able to obtain a high level of output from this neodymium motor and an unique diaphragm design for the TW400Ti-Nd Series. Featuring a new concept, easy to replace diaphragm ( solderless ) makes a very easy task to fix your tweeter in few minutes.GENERAL SPECIFICATIONS Nominal impedance 4 Ohms Nominal Power Handling* 60 Watts each Continuous Program Power (RMS)** 120 Watts each Max Peak Power*** 240 Watts each Sensitivity 2.00V at 1m 105 dB Recommended High Pass Crossover For Full Power Handling 6000 Hz 12db/oct Crossover Frequency Response at -10dB 4,500 – 20,000Hz Voice Coil Diameter 1.0″ (25 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Titanium Flux Density 1.45 T Magnet Material Neodymium *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker. EXTRA INFO Overall Depth 1.61″ (41 mm) Mounting Depth 1.22″ (31 mm) Overall Diameter 2.92″ (74 mm) Cutout Diameter 2.27″ (57.7 mm) Net Weight 0.66 lbs (0.30 kg) Shipping Weight (pair) 1.54 lbs (0.70 kg) Carton Dimensions W x L x H 6.77″ x 3.15″ x 1.99″ (172 x 80 x 50 mm)

2x PRV 240W Shallow Super Tweeter Neodymium TW400Ti-Nd-4 SLIM 4 Ohm 3″ Rounded

By |July 23rd, 2026|

Compact Neodymium Bullet Super TweeterIncludes: PAIR of Tweeters - Model: TW400Ti-Nd-4 SLIM The PRV Audio TW400Ti-Nd-4 SLIM Super Tweeter offers a smooth response and extremely high efficiency from high mid range through high range frequencies. This compact tweeter is part of a wide family from the TW400Ti-Nd Series, featuring a strong neodymium motor which increases its efficiency and lowers its weight ans size dramatically without compromising any performance. Highlights Designed to fit in tight spaces without any major modificationsTitanium diaphragm for an accurate and detailed responseDesigned to add high output, high frequency response to any interior systemHidden push terminal connection, takes less space on installationBuilt-in capacitors act as a crossover and attenuates the low frequencies for smooth frequency responseAble to take a ton of power! Up to 120 watts RMS of power handling are on tap with a 12 dB/octave crossover at 6,000 HzSold in Pairs – Mounting Screws are included, Also available in White After several months of research and development, we were able to obtain a high level of output from this neodymium motor and an unique diaphragm design for the TW400Ti-Nd Series. Featuring a new concept, easy to replace diaphragm ( solderless ) makes a very easy task to fix your tweeter in few minutes.GENERAL SPECIFICATIONS Nominal impedance 4 Ohms Nominal Power Handling* 60 Watts each Continuous Program Power (RMS)** 120 Watts each Max Peak Power*** 240 Watts each Sensitivity 2.00V at 1m 105 dB Recommended High Pass Crossover For Full Power Handling 6000 Hz 12db/oct Crossover Frequency Response at -10dB 4,500 – 20,000Hz Voice Coil Diameter 1.0″ (25 mm) Voice Coil Wire CCAW Voice Coil Former Material Kapton Diaphragm Material Titanium Flux Density 1.45 T Magnet Material Neodymium *Nominal power handling is defined as the maximum RMS power that the speaker can handle in a 2-hour test with a pink noise with 6dB of crest factor and a bandpass filter with 12db/oct tuned in its usable frequency range. **Continuous Program Power (RMS) is the maximum power that the speaker can handle considering a regular musical program using our recommended filters, this power can be used to define the optimum amplifier power to avoid a clean signal without clipping or saturation. ***Max Peak Power is the maximum power operation for the speaker, this power is allowed just for a few fractions of a second, usually found just on the peaks of the music. Keeping this power for a little longer timer will damage the speaker. EXTRA INFO Overall Depth 1.61″ (41 mm) Mounting Depth 1.22″ (31 mm) Overall Diameter 2.92″ (74 mm) Cutout Diameter 2.27″ (57.7 mm) Net Weight 0.66 lbs (0.30 kg) Shipping Weight (pair) 1.54 lbs (0.70 kg) Carton Dimensions W x L x H 6.77″ x 3.15″ x 1.99″ (172 x 80 x 50 mm)

Lamtto 3 in 1 Magic Video Box For Car Streaming Apple Carplay & Android Connect

By |July 23rd, 2026|

Portable Magic 3 in 1 Vide Box Supports Apple carplay and Android auto Wireless connectivity streaming. Supports the vehicles original controls such as buttons and knobs and microphones. It supports Bluetooth connectivity for making calls on a lesson to music via a smartphone. It supports USB output.

2-Pc 3-Inch Speaker Grill Covers – Durable ABS Subwoofer Protectors in Black

By |July 23rd, 2026|

Durable ABS Subwoofer Protectors in Black. Why Choose Our Speaker Grill Covers?. Grill Thickness: 19mm / 0.75". Designed specifically for 3" DIY speakers and car speaker decorative circles. MPN: Speaker_Grill_Covers Grill Size: 3in.

(4) Speaker Port Tubes 3in x 5in Deep Woofer Subwoofer Sub Box Bass Vent VWLTW

By |July 22nd, 2026|

The Music Masters Discount Electronics & MORE! You are looking at... Item: 4X (TWO Pair) Speaker Port Tubes 3in Wide x 5in Deep Woofer Subwoofer Sub Box Bass Cabinet Vent VWLTW Condition: New (Note: This is a Vital Wave product and is bulk shipped without retail packaging. This helps the environment and lowers the cost for everyone.) Description: Set of 4 Port Tube Vents3 x 5 inch Nominal Size (See Below)Enhances Response in Bass Reflex Custom Enclosures Open Back Vent - No GrillProvides a Professional Look Strong Molded ABS Plastic DesignGreat for DIY CabinetsFriction Fit or can be GluedOverall Diameter: 3 3/8 inches Fits in 2 5/8 inch Cutout4.75 inches DeepColor: Black Comments: This is a set of FOUR (4) classic ABS plastic port tube vents for speaker cabinets. They provide the required venting needed for many car and home woofer boxes. They also make a nice professional finished hole for various projects that may require wires, etc. to pass through. Overall they're an inexpensive accessory that works well. If you're not happy returns are free so you have nothing to lose. We stock a variety of speaker grills, speaker wire, cables, cords, adapters, and hard-to-find electronic accessories. Look in our store to see a great selection! Note: Please check the measurements to be sure these will work for you before you purchase. Thank you! Thanks for checking out one of our items! Please take the time to look at everything we have up for sale and check back often. You never know what you will find. We have been in business for over 30 years! We can best be described as an "old school" stereo shop and electronics store with a modern twist. We always guarantee your satisfaction and promptly take care of our customers. Shipping & Handling for this item is FREE everywhere in the United States. For international shipping not listed contact us for approval and a shipping quote before making your purchase. Thanks again for looking and as always your business is appreciated!

Speaker Port Tubes 3in x 5in Deep Woofer Subwoofer Sub Box Bass Vent Pair

By |July 22nd, 2026|

The product is a set of two speaker port tubes designed for a 3-inch by 5-inch deep woofer subwoofer sub box. These port tubes serve as vents to enhance the bass frequency response of the subwoofer system. The 3-inch grill size ensures optimal airflow and sound performance while adding a sleek and professional look to the car audio setup. Perfect for car audio enthusiasts looking to improve their speaker/subwoofer experience with a custom fit and high-quality design.