counter for wordpress

Power Brick 12VDC CCTV Camera Generic 500MA

By |July 24th, 2026|

CCTV Camera Fully Regulated 12VDC 1000mA AC Power Supply 1A

By |July 24th, 2026|

Item# DSC-SWP1A12 12v 1000ma Regulated Power Supply Ac to Dc Power Adapter 1A Feature: Fully Regulated 100V-240V can be used world wide 12V DC 1000mA Switching Power Supply Good for most of CCTV Cameras inner diameter: 2.1mm, outer diameter: 5.5mm Top Quality, UL ApprovedSpecifications: Power output: 12VDC, 1000 mA Maximum power output: 12W Input requirements: 110 VAC, 60 Hz Plug tip size: 2.1 x 5.5 mm Polarity: Center-Positive UL approved This high quality AC adapter is useful for many applications. In most applications, you can use an adapter with a higher capacity. However, always select an adapter with the same voltage. DC Jack tip :5.5 mm (outside dimension)x 2.1 mm (inside dimension) Center Positive Package Contents: 1pc DC12V 1000mA Power Supply Items will be Shipped on the Same or Next Business day of receiving full payment. We only accept payment by PayPal. eCheck will be hold until cleared. Payment must be received in 5 days after the auction ended. All sales are considered final, and no refunds or exchanges will be accepted. All defective items must be noticed within 7 days after received. Buyers need to return the defective item for the replacement at his own cost. Item must be original condition. If the order is not found to be defective and is as described there will be a 20% restocking fee. Our warranty does not apply to products that have been misused, modified, repaired or abused by anyone. We reserve the right as final authority on whether the products should be replaced or refunded. Shipping and handling charges are non-refundable at any case. Please make sure your shipping Address is Correct. We will only follow your address listed in the PayPal payment for the shipment. We have no responsibility for shipping address provided. Due to the secure reasons, we are not allowed the address change through the email. Buyers need to pay S&H again for reshipping the item (except the wrong buyer address is written by us).

NEW Seco-Larm Enforcer Xenon Strobe Light, 12VDC,Blue Lens SL-126Q

By |July 24th, 2026|

The item exteriors may have minor scratches, scuffs, dents, cracks, nicks, etc. New Open Box . Local pickup is available.

12VDC 2A POWER SUPPLY ESS RESINWORKS 959-12PS

By |July 24th, 2026|

(1) 12VDC 2A POWER SUPPLYPERFECT FOR THE 1/24 SCALE LED SHOP LIGHTS WE SELL (5 MAX 282-4SLW - NOT INCLUDED!) *******PLEASE READ******* IF YOU HAVE ANY SUGGESTIONS OR REQUESTS, PLEASE LET ME KNOW. IF YOU ARE SATISFIED WITH YOUR PURCHASE, PLEASE LEAVE A POSITIVE FEEDBACK. IF THERE ARE ANY ISSUES, PLEASE BRING IT TO MY ATTENTION AND IT WILL BE TAKEN CARE OF PROMPTLY.PLEASE TAKE A LOOK AT MY OTHER PRODUCTS WHILE YOU'RE HERE AND REMEMBER, IM ALWAYS COMING UP WITH NEW IDEAS INTO PRODUCTS, SO KEEP COMING BACK.WILL SHIP TO LOWER 48 STATES ONLY!

New Tohtsu CX-520D SPDT Coaxial Antenna Relay 12 VDC Coil – Female N Connectors

By |July 24th, 2026|

New Tohtsu CX-520D SPDT Female N type Coaxial Antenna Relay with 12 VDC Coil. This is a new, in original box, Tohtsu CX-520D SPDT type coaxial antenna relay with female N connectors at each port. This is new inventory at Henry Radio.

I.T.E. XH1200-4000 Power Supply AC/DC Adapter In 100-240V Out 12VDC 4A TESTED

By |July 24th, 2026|

12 VDC to 5VDC 3A 90 Degree Angled Micro USB Adapter 30″ Cable DC-DC Converter

By |July 24th, 2026|

12VDC input on the bare wires. To Micro USB 5VDC Angled Connector. The plastic outer shell is easily removed to remove the actual pc board (has easy to read markings for input and output for use in a project if wanted. ).

New Vacuum SPDT Antenna Relay VC-2 12VDC for HF Amplifier – Greenstone

By |July 24th, 2026|

New VC-2 Vacuum SPDT Antenna Relay 12 VDC for High Power Amplifier Builder This auction is for one new VC2 ceramic body, vacuum relay for use as an output relay in a high power amplifier. The relay is a SPDT configuration and operates from 12 vdc with slightly more than 100 ma current draw when activated. The relay measures approximately 2.25" high and the body is 1 inch diameter. The product is equal to a Jennings RJ2B-26 or RJ6B-26 vacuum relay. The relay will easily switch 5000 watts or more for an HF linear amplifier. The relay is a replacement part in the Henry 8K Ultra, 5K Classic and 3002A. This is new inventory at the Henry amplifier factory in Los Angeles, California. Shipping anywhere in the continental US is FREE. International shipping will be quoted on request. Pay me securely with any major credit card through PayPal!

Replacement 12 VDC Coil Assembly for Greenstone VC-2 Vacuum Relays

By |July 24th, 2026|

DNFI AC Adapter 5-Pin ITE Power Supply 5/-5/12VDC 0.3 – 3A Model UP30432

By |July 24th, 2026|

Description This is a DNFI AC Adapter ITE Power Supply. Model UP30432 E134642 Input: 100/250V AC 50/60Hz 1.2A Output: 5/-5/12VDC 3A 0.3A 2A Has a round 5-pin din type plug. AC line cord included. Check for compatibility before purchasing