counter for wordpress

Aluminum Alloy Welding Radiator Cap Compatible with 1.5 in and 2 in Pipes

By |July 23rd, 2026|

Material:aluminum alloy. Wide-Range Fit Design: Compatible with various vehicle models for easy installation and for versatile application. OEM Number:no. Enhanced Heat Resistance: Withstands high temperatures and harsh engine conditions for long-lasting use.

50/50/50uF @ 350vdc 3-section 1.5-in.dia. Electrolytic Can Capacitor

By |July 23rd, 2026|

50/50/50 mfd @ 350 vdc 3-Section FP Type Twist-Prong Mount Can CapacitorCan is common Negative -Custom Made in USAConstructed to Last using High-Quality ElectrolyticsBeautiful Heavy-Duty Sealed Chrome CanFP type, Twist Prong Chassis Mount 3-section Electrolytic Can Capacitor. Dimensions: 1.5-inch diameter x 2.25-inch tall

Sundown Audio SALT-1.5 1500W RMS Class D Monoblock Amplifier Made In Korea

By |July 23rd, 2026|

3000 x 1 @ 2 ohms RMS Linked. 1500 x 1 @ 1 ohms RMS Mono. 750 x 1 @ 2 ohms RMS Mono. 400 x 1 @ 4 ohms RMS Mono. Digital Class-D Linkable Mono Block Amplifier. Input Sensitivity : 6V - 0.2V. Efficiency : 90% <.

One Mini Portable Bluetooth Speaker in Black/Green Approx: 1.9″ X 1.5″ X 1.9″

By |July 23rd, 2026|

One Mini Bluetooth Speaker. (I currently only have 1 available). Portable Speaker. Black with Green. This item was never used. The exact item in the photos is the exact item you will receive.

Hammarlund 1.5″ plug-in coil shortwave

By |July 23rd, 2026|

Speaker 2 inch 8 OHM 1.5w speaker

By |July 23rd, 2026|

SPEAKER 2 INCH 8 OHM 1.5W SPEAKERPART NO. 410050-03515 PLEASE SEE OUR POLICIES BELOW FOR ANY PURCHASED ITEMS: USED INSTRUMENT ITEMS MAY HAVE SOME SCUFFS, SCRATCHES, DINGS OR LABEL RESIDUE. PLEASE REFER TO THE DETAILED PICTURES.EQUIPMENT SOLD AS "PARTS OR REPAIR" ARE NOT RETURNABLE.ALL PARTS THAT ARE LISTED AS "RE-CYCLED OR RE-PURPOSED" ARE NOT RETURNABLE. WE ALSO SELL COMPONETS AND HARDWARE WHICH HAVE BEEN REMOVED FROM OLD EQUIPMENT AND SOLD AS-IS AND MAY HAVE TO BE CLEANED AND RESTORED. THESE ITEMS ARE NOT RETURNABLE BUT ARE PROVIDED AT LOWER COST FOR THE HOBBYIST AND DIY'ER. NO ACCESSORIES, POWER SUPPLIES, CHARGERS OR CORDS COME WITH INSTRUMENTS OR EQUIPMENT UNIT UNLESS NOTED. ALL ELECTRONICS PARTS, IC COMPONENTS, TRANSISTORS, SOCKETS, CONNECTORS AND PASSIVE COMPONENTS WHICH ARE LISTED AS "NEW UNUSED OR NEW SURPLUS & ARE IN ALLWAVE LABS PACKAGING ARE RETURNABLE WITH PRIOR NOTICE AND REASON FOR RETURN. RECYCLED PARTS AND COMPONENTS WHICH ARE REMOVED FROM EQUIPMENT, ARE TESTED FOR FUNCTIONALITY AND WILL BE STATED AS SUCH IN ALL LISTINGS (if you receive a defective item please notify us) MOST PRE-OWNED AND USED EQUIPMENT AND OR INSTRUMENTS ARE FULLY TESTED FOR BASIC OPERATION. WE ARE A FULL ELECTRONICS LAB AND A CERTIFIED CALIBRATION FACILITY.ANY ELECTRONIC EQUIPMENT THAT CANNOT BE CHECKED FOR BASIC OPERATION WILL BE STATED AS SUCH ANY INSTRUMENTS OR EQUIPMENT SOLD AS REPAIR OR PARTS ONLY WILL BE CLEARLY STATED AS SUCH AND ARE NOT RETURNABLE. SHIPPING AND RETURN POLICIES: Shipping · Shipping to Hawaii, Alaska, Puerto Rico all U.S. bases and territories requires extra shipping charge · WE SHIP TO ALL VERIFIED EBAY/ PAYPAL ADDRESSES NO SHIPPING TO P.O. BOX NUMBERS UNLESS YOU GIVE US AN OK VIA EMAIL FOREIGN BUYERS ARE RESPONSIBLE FOR ALL CUSTOMS FEES AND EXTRA SHIPPING AND HANDLING. Returns We offer on most of our items 30 day return option: In order to get a refund these conditions must be met by the buyer: 1. Buyer must notify us by eBay email within 30 days of receiving the item that item is being returned 2. We will give you approval by eBay email to return the item 3. We must receive the item back within 14 days after approval is given 4. Buyer must notify us thru eBay email of tracking info 5. Item must be in the original condition and packaging that the buyer received 6. Item cannot be tampered with in any way 7. Seal must not be broke (some items will have a do not tamper OR CALIBRATION VOID seal) 8. Item must be packed properly and securely by the buyer and insured when item is returned to us. 9. Buyer is responsible for return shipping cost. REFUNDS-WILL BE GIVEN ONCE ITEM IS RETURNED TO US WITHIN THE 30 DAY RETURN POLICY RULE. ITEM MUST BE IN THE ORIGINAL CONDITION WHEN RETURNED. PLEASE ALLOW US 5 DAYS TO REFUND. NO RETURN SHIPPING WILL BE REFUNDED AS-IS Items Items that are marked "as is" or "re-cycled" will not be allowed to be returned. Please be aware of item conditions before bidding. **ITEMS SOLD FOR PARTS, OR NOT WORKING**. NO RETURNS WILL BE ACCEPTED. **BRAND NEW ITEMS THAT ARE RETURNED AND NOT IN ITS ORIGINAL CONDITION WILL NOT BE ACCEPTED** MUST BE IN ORIGINAL CONDITION SO WE CAN SELL IT AS NEW AGAIN. IF ITEM IS USED OR OUT OF ITS ORIGINAL CASE OR IF SEAL IS BROKEN, WE WILL NOT ACCEPT RETURN OF THE ITEM . CONTACT US IF YOU HAVE ANY QUESTIONS. NONE COMPATIBILITY ISSUES ? IF YOU PURCHASED AN ITEM AND IT IS NOT COMPATIBLE WITH YOUR NEEDS WE WILL NOT ACCEPT RETURNS. PLEASE CHECK BEFORE YOU PURCHASE. IN SOME CASES WE WILL ACCEPT AN ITEM WITH A 25% RESTOCKING CHARGE. WARRANTY: NO WARRANTY IS GIVEN ON THE PRODUCTS UNLESS SPECIFIED IN THE LISTING. CALIBRATION: ITEMS ARE NOT CALIBRATED UNLESS STATED IN THE LISTING. FEEDBACK: We appreciate your positive feedback as we will do the same for you. If less than a positive feedback is going to be left we would appreciate the opportunity to be heard and correct whatever issues that YOU MAY HAVE.

1.5 M/59 in Projector Bracket Motorized Electric Lift Projector Remote Control

By |July 23rd, 2026|

59 in Electric Lift Ceiling Projector Bracket This projector lifter is used at school, assembly room and another. This projector lift can put the projector hidden, and also, this lift include a remote control, so it will be more beautiful and more convenience. Parameter: Range:59In (1.5M) Power:48W Load:22Lb(10Kg) Chassis size:13.78'' x 10.63'' x 7.87''(35 x 27 x 20cm) voltage:110V Baseplate:19.69'' x 19.69''(50 x 50cm) Net weight:33Lb (15Kg) Product features: 1.Mechanical positioning, accurate positioning, small failure rate. 2.Synchronous gear motor, low noise. 3.Beautiful appearance suitable for all kinds of public places. 4.Simple operation and convenient control. Attention: Out size of the projector could not bigger than 19.69''x19.69''(50 x 50cm). The weight of the projector could not than 22Lb(10Kg). Without lifting, please do not test.Do not operate product descent on the ground. There is no battery in the remote control, you need to bring your own. Item Number(120060): One set of projector lifter You can make order with no worry. Any concern just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.

10 pack of Stainless steel U-Bolts for tube size 1.5in. HEAVY DUTY

By |July 23rd, 2026|

Heavy Duty Double Edge (Open End) This double edge open end clamp provides superior strength and sealability.These Clamps provide a complete 360 degrees heavy duty seal to surpass all of you needs .The UDO is a very strong with outstanding strength and seal-abilityThe UDO-Series is available in a variety of sizes. Please see 5th picture to compare dimensions.Size N/A 1.50 in A N/A 2.88 in B N/A 2.06 in C N/A 2.43 in D N/A 1.00 in E N/A 1.73 in F N/A 0.31 in G N/A 1.17 in H N/A 0.800 in Gauge N/A 11 Weight N/A 0.31 lb Optional Material N/A 304 Stainless Steel Tolerances N/A 2 Pl. Dec. ± 0.060 3 Pl. Dec. ± 0.030 U-Bolt Assembly N/A C1018 - 3/8-16 UNC-2A Threads Saddle N/A 1008-H.R.P.O. Nuts N/A Serrated Flanged from 7/15/21. 2" is available...

Shock Mount 1.5in ID 5th /6th Coil Mount Alum

By |July 23rd, 2026|

Shock Mount - Drop Mount - Clamp-On - 3-1/4 in Drop - Aluminum - Black Anodized - 1-1/2 in OD Tube - Each

Wooster Sherlock 1.5 in Aluminum/Fiberglass Extension Pole Beige/Green R054

By |July 23rd, 2026|

Adjust the length of the 2 - 4 foot pole with just the touch of the thumb. The green quick-release position lock is made of durable, fiberglass-reinforced nylon with a heavy-duty brass locking pin. You can depend on Sherlock there's no need to worry about slipping or twisting. It has a polyester fabric surface treatment for durability. The rugged, zinc die cast threaded tip holds the roller frame securely. Brand Name: Wooster Sub Brand: Sherlock Telescoping: Yes Handle Length: 2-4 ft. Diameter: 1.5 in.