Portable Audio & Headphones – Page 22

RAM Mount Plastic Arm with 1″ B-Ball and Button Socket RAP-B-200-1U

By |2026-07-22T09:42:08+00:00July 22nd, 2026|

Manufacturer Description MOUNT TYPE 1" dia. Ball Socket and Octagon Button Socket Plastic Arm. PART DESIGN The arm has a socket at one end to allow a 1" dia ball accessories to be connected and the other is for the Plastic Octagon Button. A tightening screw on the side of the arm enables the sockets to clamp firmly on the ball and the button. When loosening the side screw, the ball easily removes from the socket, but he arm must be disassembled to remove a octagon button from the socket.

RAM Mount Plastic Round Base with 1.5 inch Ball RAP-202U

By |2026-07-22T09:42:08+00:00July 22nd, 2026|

Manufacturer Description The RAP-202 RAM Mount High Strength Plastic Universal Plate has a 1.5 inch diameter rubber ball connected at right angles to a 2.5 inch diameter round plate. The plate has 4 holes that match the universal industry standard AMPS hole pattern. Note: This base plate will attach to any of the RAM plastic HOL holders.

RAM Mount Plastic Rectangular Plate 2 x 2.5 inches with 1 inch Ball

By |2026-07-23T01:06:37+00:00July 22nd, 2026|

Manufacturer Description The RAP-B-202-225 RAM Mount High Strength Plastic Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2 x 2.5 inch rectangular plate. The plate has pre-drilled holes in each corner of the base plate. Note: Mounting hardware isNOT included with the purchase of the RAP-202-225.SpecificationsThere are no specifications currently available for this item.

RAM Mount Plastic Self Leveling Cup Holder with 1 inch Ball and Foam Holder

By |2026-07-23T00:11:30+00:00July 22nd, 2026|

What's Included In The Box? The RAM Mount Self Leveling Cup Holder Foam RAM-B-132BU ships with the following items included:RAM Mount Self Leveling Cup Holder No Foam RAM-B-132B-WH1UGPS City Logo Foam Koozie Holder IIManufacturer Description A favorite world wide, the RAM self-leveling drink cup holder will bring a smile to anyone’s face when they get it. The perfect accessory for any vehicle including motorcycles, ATV’s, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride. Mount Type: 1" diameter B-Ball Plastic Self Leveling Cup Holder. Cradle Design: This cradle consists of a 'cup like' holder that is hinged at two points to a holding frame. The hinges allow the cup holder to stay level no matter how much the holding frame tips.SpecificationsThere are no specifications currently available for this item. Note: Does not ship with RAM blue koozie/drink holder. Ships with a GPS City black koozie/drink holder.

RAM Mount Plastic 1″ Twist Socket Arm With Center Rotation RAP-B-200-12U

By |2026-07-22T09:42:07+00:00July 22nd, 2026|

Manufacturer Description The RAP-B-200-12 High Strength Plastic Double Socket Twist Arm has dual 1.0 inch diameter ball sockets with a 360 degree rotation point at the arm center. A tightening screw on the side of both sockets enables the arm to clamp firmly to the RAM rubber ball accessories. When loosening the side screw on either arm, the corresponding ball can be easily adjusted or removed from the ball if required. Part Components: Three parts connect together to form the RAP-B-200-12. It is important to note, that there is a separate tightening bolt for each socket, rather than the one bolt in the arm center as found on other RAM arms. This arm system consists of two (2) 1.0 inch diameter ball socket and button socket arms (RAP-B-200-1) joined together with a plastic double button connector (RAP-280).

RAM Mount Composite Plastic Rectangular AMPS Plate with 1 inch B-Ball RAP-B-347U

By |2026-07-23T16:16:38+00:00July 22nd, 2026|

Manufacturer Description The RAP-B-347 High Strength Plastic Composite Universal Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a Rectangular Plate. The plate has pre-cast holes in each corner making the universal AMPS hole pattern. If required, the different hole pattern allows you to connect this plate to almost any type of existing hole pattern.

RAM Mount Plastic Standard Arm with 1 inch and 1.5 inch Socket RAP-BC-201U

By |2026-07-23T22:09:17+00:00July 22nd, 2026|

Manufacturer DescriptionThe High Strength Double Socket Plastic Arm has a 1.5" dia. Ball Socket at one end and a 1.0" Socket at the other.This combination arm allows a 1.5" dia ball accessories to be connected at one end and the other end has a socket for a 1.0" dia ball accessory.A tightening screw on the side of both arms enables the sockets to clamp firmly to the rubber ball accessories. When loosening the side screw on either arm, the corresponding ball easily removes from the socket if required.What's Included In The Box?The RAM Mount Plastic Standard Arm with 1 inch and 1.5 inch Socket ships with the following items included:RAM Mount Plastic Arm with Ball and Button SocketRAM Mount Double Octagon ButtonRAM Mount Plastic 1.5 inch Socket and Button Arm

RAM Mount Plastic 1.5” Ball 4.63″ Double Socket Medium Sized Arm RAP-201U

By |2026-07-22T09:42:06+00:00July 22nd, 2026|

Manufacturer Description The High Strength Plastic Standard 4.63" Double Socket Arm has a socket at either end to allow a 1.5" diameter ball accessories to be connected. A tightening screw on the side of the arm enables the sockets to clamp firmly to a RAM 1.5" diameter ball. When loosening the side screw, a single spring inside the arm opens the sockets allowing you to pivot the ball and socket connection or completely disconnect the ball from the socket. The arm length is 4.63" when measured from socket center to socket center.

RAM Mounts Plastic Spine Cradle for Handheld Garmin Devices RAM-HOL-GA76U

By |2026-07-22T09:42:06+00:00July 22nd, 2026|

Manufacturer Description The RAM-HOL-GA76U Garmin spine mount from RAM Mounts, make any Garmin handheld device featuring an integrated spine connection RAM Compatible - it’s as easy as slide, snap, and secure. This mount easily clips into the integrated spine connection on a wide range of Garmin GPS and satellite communication handheld devices. Easily pair your Garmin handheld with any RAM mounting system with a diamond plate end. This allows you to take advantage of popular solutions like the RAM Twist-Lock suction cup, RAM Tough-Claw, RAM Tough-Track, and much more. Hardware is included.To see if your Garmin handheld device is compatible with this spine mount, check the list below:Alpha 100Approach G3, G5Astro 320, 430, 900Dakota 10, 20eTrex 10, 20, 30eTrex 20x, 30xeTrex Touch 25, Touch 35, Touch 35tGPSMAP 62, 62s, 62sc, 62st, 62stcGPSMAP 64, 64s, 64scGPSMAP 66s, 66stinReach Explorer+inReach MiniinReach SEOregon 200Oregon 300Oregon 400c, 400i, 400tOregon 450, 450tOregon 550, 550tOregon 600, 600tOregon 650, 650tOregon 700Oregon 750, 750tRino 610, 650, 650t, 655tRino 700, 750, 755tSport PROImportant Note: This listing is for the RAM-HOL-GA76U only. The additional mounting pieces and GPS depicted are sold separately. FeaturesUniversal mounting with all Garmin handheld GPS with mounting spineOpen access to all electronic portsEasy placement and removal of the GPSHigh strength materials ensure product longevityLifetime WarrantyMade in the U.S.A.

RAM Mount 1.5″ Plastic Track Base Ball With T-Bolt Attachment RAP-354U-TRA1

By |2026-07-22T09:42:06+00:00July 22nd, 2026|

Manufacturer Description The RAP-354-TRA1 RAM Track Adapter Base with 1.5 inch RAM rubber ball has a T-Slot attachment on the bottom, allowing it to attach to track rails found on many kayaks. Simply twist the ball clockwise to tighten, and counterclockwise to loosen and adjust the positioning.