For Garmin DriveSmart Series DriveSmart 50 / 50LMT / 51 / 51LMT-S / 55 / 55LMT / 60 / 60LMT. DriveSmart 61 / 61LMT-S / 65 / 65MT / 65LMT / 70 / 70LMT / 70LMT-S / 76. For Garmin Drive Series For Garmin Nuvi Series.
DriveSmart Series: 50, 50LMT, 50LMTHD, 51, 51LMT-S, 51LMT-D, 55, 55MT, 55EX, 60, 60LMT, 60LMTHD, 61, 61LMT-S, 65, 65MT, 66, 66EX, 70, 70LMT, 71, 71EX, 76, 76EX. ❗NOT COMPATIBLE with Garmin DriveSmart 86❗.
(1) Horizontal Mounting Base: easily attach this mount to your boat with screws; is rather preferred when deck space is limited. 3) Thread Pin-lock Knobs: simply loosen or tighten by hand to fix or release the arm or the rectangular plate.
ARKON Suction Cup Mount with Tripod type 1/4" x 20 screw adapter. Features super-strong Travelmount windshield suction pedestal. Includes adhesive disc for dash or console mounting—no tools required. 1690, NuLink 1695 Live.
Manufacturer Description The RAM-111-D RAM Mount Marine Grade Aluminum Mount, with Long Arm and Screw Down Base, consists of the 1.5 inch diameter ball and socket system with RAM Universal Rectangular 6.25 x 2 inch Plate. This mount is designed to be a universal mounting solution for large and heavy electronic devices, including Marine GPS, CB Radios, Ham Radios and more. The hole pattern found on the rectangular plate will connect to a large variety of third party cradle, gimbal brackets and mounts.
Aluminum Alloy 17MM Ball Head Adapter To 1/4" Screw Hole Mount Holder For Tripod Selfie Handle Grip Stand Ball Head Adapter. Thread hole: 1/4 "thread hole. 1x Ball Head Adapter. Applicable to phone clip, tablet clip, monitor bracket and more.
Manufacturer DescriptionThe RAM-B-111-A RAM Mount Marine Grade Aluminum Mount, with Short Arm and Screw Down Base, consists of the 1 inch diameter ball and socket system with RAM Universal Rectangular 6.25 x 2 inch Plate. This mount is designed to be a universal mounting solution for large electronic devices, including Marine GPS, CB Radios, Ham Radios and more. The hole pattern found on the rectangular plate will connect to a large variety of third party cradle, gimbal brackets and mounts.Rectangular Universal Mount End Plate Design:The RAM-B-111B RAM Mount Marine Grade Aluminum Universal Rectangular Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 6.25 x 2 inch plate. The plate has many different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Rectangular Universal Mount Arm Design: The RAM-B-201-A RAM Mount Dual Socket Short Arm is a 1 inch B size Ball Dual Socket Arm made of Marine Grade Aluminum. The arm is 1.75 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. Rectangular Universal Mount Base Design: The RAM-B-202 RAM Mount Marine Grade Aluminum Screw Down Plate has a 1.0 inch diameter Rubber Ball connected at right angles to a 2.5 inch diameter Plate. The plate has pre-drilled holes in the base plate, including the universal AMPS hole pattern.What's Included In The Box?The RAM Mount Marine Plate Screw Down Short Mount 1.0 inch Ball ships with the following items included:RAM Mount Rectangular 6.25 x 2 inch Plate on 1.0 inch BallRAM Mount Short Arm B-Socket RAM-B-201U-ARAM Mount Round Plate with 1 inch Ball RAM-B-202U
MOUNT ONLY, MAGNET CRADLE NOT INCLUDED.
Garmin Screw Down Mount with 22mm (0.86") G-ball for Dezl OTR / LGV and more NOTE: The base only option is compatible with all GPS options in the drop down selections. Remove your ball arm from the suction mount and install it on the screw base. Simply screw the mount to your dash, and then attach your compatible device (22mm) to the the ball mount.Check out these compatible accessories as well:Magnetic GPS Mount Magnetic MountMount the magnetic mount to a Ram Mount 1 inch (25mm) Ball GARMIN AMPS PLATESuction Mount Windshield Suction MountPower Cord Vehicle power cord Dash disk 3.5” AP020Ships in sealed package
Manufacturer Description The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more. Please Note: The Lowrance Unit Depicted Is Not Included With This ItemFeaturesOverall Length: 15.2" Weight Capacity: Up to 6 lbs.