IN-12A ИН-12А soviet Vintage Nixie Tube Display Indicator New
Housing - glass. We will make every effort to fix any problem. Weight of 10 g.
Housing - glass. We will make every effort to fix any problem. Weight of 10 g.
Lot for 1 pcs IN-12A Glow discharge indicators IN-12A, IN-12B for visual indication of electrical signals in radio engineering devices of stationary and mobile equipment for general and special purposes The height of the numbers is 18 mm. Indication is made through the balloon dome. The mass of the device is 20 g. Power supply voltage, V not less 200 no more - Discharge initiation voltage, V - no more 170 Discharge maintenance voltage, V - no more 150 Indication current for digits, mA - no more 2.5 Indication current for comma, mA - no more 0.3 Continuous operating current for digits, mA not less 2 no more 3.5 Constant operating current for comma, mA not less 0.3 no more 0.7 Pulse operating current for digits, mA not less 1 no more 2 Pulse operating current for comma, mA not less 0.15 no more 0.2 Luminescence brightness of cathodes, cd / m2 not less 100 - Viewing angle, degrees not less ± 30 - OPERATING INSTRUCTIONS: • To exclude the influence of storage conditions on the parameters of the indicators, it is recommended to train the indicators with currents of 1-2 mA (pulsating) or 2.5-3 mA (constant) for a period of at least 1 minute for each cathode before establishing the operating mode. • It is recommended to supply indicators with a half-wave rectified mains voltage without a filter. In this case, the value of the average current for each of the cathodes should not exceed 2mA. • It is allowed to operate indicators on one cathode for 1000 hours in durability mode. • Recommended value of supply voltage when operating on direct current - 250 V. This significantly reduces the delay time of the discharge. • Soldering of pins is allowed at a distance of at least 4 mm from the base of the cylinder. • During the operation of the indicators, it is allowed to have luminous areas on the traverses, as well as cathode areas not covered with glow, no more than 2 mm in size, which do not interfere with the visual indication of numbers. Combined shipping is accepted Contact me via message for any question Shipping time - 10-30 days Item will be shipped immediately after payment Thing will be securely packed Delivery from Ukraine by postal service Thanks for looking!
Used IN-12A or IN-12B nixie tubes. Four tubes in one lot.
NOS Soviet IN-12A nixie tubes. Six tubes included in each lot. Every tube is tested and fully working.
NOS without Boxes. I tested all the tubes with TV7/BU Tube tester. Minimum: 38. - Made in USA Item#A890. Tube#5: 74. Tube#4: 74. Tube#3: 68.
Up for sale 6PCS used SOCKETS for nixie tubes IN-12A IN-12B IN-15A IN-15B IV-22 and other.Sockets used, but excellent condition.100% working condition. Shipping Ships to Worldwide from Airmail with trucking.Shipping time 2-6 weeks depending on your location. Good luck!
IN-12B,IN15A,IN15B Soviet Russian Nixie Indicator Vacuum Tubes with Sockets. Lot of 10 pcs. IN12B-8pcs / IN12A-1pcs / IN12B-1pcs. Used Tested in working condition !
Lot for 6 pcs IN-12A + 6 pcs PL31A-P sockets for nixie tube indicators. • It is allowed to operate indicators on one cathode for 1000 hours in durability mode. In this case, the value of the average current for each of the cathodes should not exceed 2mA.
Socket for IN-12A / IN-12B / IN-15 Nixie Tubes and IV-22 VFD Tubes. Model # PL31A-P (ПЛ31А-П)Color: BLACK or BROWNMaterial: BakeliteRated Voltage: 300VRated Current: 0.3ATemperature range: -60°C to +85°C Two color choices BLACK and BROWN, please specify if you have a preference. The sockets are Unused Old Stock. Excellent condition. Stored in a factory box wrapped in wax paper. The listed price is per 1 socket. Will combine shipping by default when possible. Happy eBaying!